On 10/10/2012 11:07 AM, Björn Wetterbom wrote:Thanks. I've no experience with a serial console. Tutorials on the web seems to edit also the grub files, which aren't on this ARM install.
I have a raid1 setup on my ts-209 (from the original install). See my
fstab below.
If your raid1 setup is done, just update your fstab and run
"update-initramfs -u && flash-kernel" to update the initramfs with the
new fstab and install the initramfs to flash. I'd advice you to have a
serial console in case something goes wrong.
What should be done different on a ARM in comparison with this method for instance?
http://www.cyberciti.biz/faq/howto-setup-serial-console-on-debian-linux/
/B
--- 8< ----
$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults
0 0
/dev/md0 / ext3 noatime,errors=remount-ro
0 1
/dev/md2 /home ext3 noatime
0 2
/dev/md1 none swap sw
0 0
none /proc/bus/usb usbfs defaults
0 0
--- >8 ---
On Wed, Oct 10, 2012 at 10:53 AM, rosea.grammostola<rosea.grammostola@gmail.com <mailto:rosea.grammostola@gmail.com>> wrote:To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.__debian.org
On 10/10/2012 06:53 AM, Johnson Chetty wrote:
you need u-boot to set up the environment for the
device.... and
u-boot will then load the kernel..
Thanks. Do you've pointers for how to do this?
--
<mailto:debian-arm-REQUEST@lists.debian.org>listmaster@lists.debian.org <mailto:listmaster@lists.debian.org>
with a subject of "unsubscribe". Trouble? Contact
Archive: http://lists.debian.org/__[🔎] 50753797.7010803@gmail.com
<[🔎] 50753797.7010803@gmail.com" target="_blank">http://lists.debian.org/[🔎] 50753797.7010803@gmail.com>