[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Net installation of Squeeze on Dockstar failed

I've a Dockstar on which I've installed OpenWrt in the Flash memory.
I've also an uBoot.2011-12 bootloader installed.

I want now, to install Debian on a USB storage.

Four times, I've installed a squeeze version on USB devices, either real disk drives behind a USB adaptor or on a USB-Stick.

Installation is done directly from network (only uImage and uInitrd loaded, no local storage for other debian objects)
Installation process is always successful (i.e.. no error).

However, when I try to boot, just after installation or later, it's impossible to mount sda1 at the end of the init process.

[    8.731929]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[    9.212660] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    9.218818] sd 0:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ...
Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
mount: mounting /dev/sda1 on /root failed: No such device
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init= bootarg.
BusyBox v1.17.1 (Debian 1:1.17.1-8) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off

Has somebody an idea to solve this issue ?

More details are given in a post here : http://forum.doozan.com/read.php?2,8901

Reply to: