[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: No network on OpenRD-Ultimate with today's D-I build?



If you have an debian CD I will suggest an Local Install. Rather than over the
Network(Reaching Debian.org). I think the network to the TFTP Server
is working from the boot log.
Try modifying the ISO to have the OpenRD-* on the local disk. Then try
and use the Debian Installer
to the local. By the way you have not told whether this software is
only binary images or has source
code. The other way would be compiling the source code.

On Sat, May 8, 2010 at 6:02 PM, Charles Plessy <plessy@debian.org> wrote:
> Dear all,
>
> I ordered an OpenRD-Client to Globalscale Technologies and they sent me an
> OpenRD-Ultimate instead… I just tried the Debian Installer on it and could not
> get the network to work: I can not get an IP address by DHCP, and can not reach
> other computers if I set up an IP manually. I do not know if it is because of
> the unexpected hardware difference or not.
>
> First problem, I do not know what ArcNumber to give to u-boot. I tried 2325
> (OpenRD-Base) and 2361 (OpenRD-client), and it did not made observable
> differences. I looked for other ArcNumber at the following URL, but could not
> find. http://www.arm.linux.org.uk/developer/machines/download.php
>
> On a separate Debian system (i386), I have set up a DHCP server (dnsmask), a
> tftp daeomn (tftp-hpa), and a serial console terminal (screen). The OpenRD box
> and the other Debian system are on the same LAN via a switch.
>
> >From the u-boot system, I can get an IP from the DHCP server:
>
> Marvell>> dhcp
> mvEgigaInit: egiga0 init -by ddb mvBoardPhyAddrGet()=0x0 , priv->port =0x0 by ddb
> BOOTP broadcast 1
> *** Unhandled DHCP Option in OFFER/ACK: 28
> *** Unhandled DHCP Option in OFFER/ACK: 28
> DHCP client bound to address 192.168.0.20
>
> >From the Fedora system that is shipped in the NAND memory, I can also get
> receive an IP by DHCP.
>
> Booting the Debian Installer via tftp works well, despite a couple of hicups
> (the “T”s):
>
> Marvell>> tftpboot 0x01100000 uInitrd
> mvEgigaInit: egiga0 init -by ddb mvBoardPhyAddrGet()=0x0 , priv->port =0x0 by ddb
> Using egiga0 device
> TFTP from server 192.168.0.1; our IP address is 192.168.0.20
> Filename 'uInitrd'.
> Load address: 0x1100000
> Loading: #################################################################
>         ########################T #########################################
>         #################################################################
>         #################################################################
>         #################################################################
>         #################################################################
>         #################################################################
>         ##########################################################
> done
> Bytes transferred = 2622732 (28050c hex)
> Marvell>> tftpboot 0x00800000 uImage
> mvEgigaInit: egiga0 init -by ddb mvBoardPhyAddrGet()=0x0 , priv->port =0x0 by ddb
> Using egiga0 device
> TFTP from server 192.168.0.1; our IP address is 192.168.0.20
> Filename 'uImage'.
> Load address: 0x800000
> Loading: ######T ###########################################################
>         #################################################################
>         #################################################################
>         #################################################################
>         ####################
> done
> Bytes transferred = 1431260 (15d6dc hex)
>
>
> Then, the installer is started, but it does not manage to get an IP with DHCP:
>
> May 26 20:33:01 main-menu[204]: INFO: Menu item 'netcfg' selected
> May 26 20:33:01 netcfg[641]: INFO: eth0 is connected.
> May 26 20:33:01 kernel: [   32.746041] eth0: link up, 10 Mb/s, half duplex, flow control disabled
> May 26 20:33:04 kernel: [   35.441605] eth0: link up, 10 Mb/s, half duplex, flow control disabled
> May 26 20:33:25 netcfg[641]: INFO: eth0 is connected.
> May 26 20:33:27 main-menu[204]: (process:640): udhcpc (v1.15.3) started
> May 26 20:33:27 main-menu[204]: (process:640): Sending discover...
> May 26 20:33:27 main-menu[204]: (process:640): Sending discover...
> May 26 20:33:27 main-menu[204]: (process:640): Sending discover...
> May 26 20:33:27 main-menu[204]: (process:640): udhcpc: has been called with an unknown param: leasefail
> May 26 20:33:27 main-menu[204]: (process:640): Received SIGTERM
> May 26 20:33:27 main-menu[204]: INFO: Menu item 'netcfg' succeeded but requested to be left unconfigured.
>
> I did not manage to get much more information. Just in case, here are the
> modules loaded by the Debian Installer:
>
> ~ # lsmod
> Module                  Size  Used by
> mvsdio                  5318  0
> mv643xx_eth            22562  0
> mmc_core               49980  1 mvsdio
> libphy                 14240  1 mv643xx_eth
> ~ # modprobe -l
> kernel/drivers/mmc/host/ricoh_mmc.ko
> kernel/drivers/mmc/host/tifm_sd.ko
> kernel/drivers/mmc/host/sdhci.ko
> kernel/drivers/mmc/host/mvsdio.ko
> kernel/drivers/mmc/core/mmc_core.ko
> kernel/drivers/mmc/card/mmc_block.ko
> kernel/drivers/net/phy/libphy.ko
> kernel/drivers/net/mv643xx_eth.ko
> kernel/drivers/net/mii.ko
> kernel/drivers/misc/tifm_core.ko
> kernel/fs/mbcache.ko
>
> and here are the modules loaded in the Fedora default installation:
>
> -bash-3.2# lsmod
> Module                  Size  Used by
> -bash-3.2# modprobe -l
> /lib/modules/2.6.22.18/kernel/fs/udf/udf.ko
> /lib/modules/2.6.22.18/kernel/fs/xfs/xfs.ko
> /lib/modules/2.6.22.18/kernel/fs/fat/fat.ko
> /lib/modules/2.6.22.18/kernel/fs/reiserfs/reiserfs.ko
> /lib/modules/2.6.22.18/kernel/fs/msdos/msdos.ko
> /lib/modules/2.6.22.18/kernel/fs/ntfs/ntfs.ko
> /lib/modules/2.6.22.18/kernel/fs/vfat/vfat.ko
> /lib/modules/2.6.22.18/kernel/fs/isofs/isofs.ko
> /lib/modules/2.6.22.18/kernel/sound/drivers/snd-dummy.ko
> /lib/modules/2.6.22.18/kernel/arch/arm/plat-feroceon/mv_drivers_lsp/mv_sdio/mvsdmmc.ko
> /lib/modules/2.6.22.18/kernel/arch/arm/plat-feroceon/mv_drivers_lsp/mv_udc/mv_udc.ko
> /lib/modules/2.6.22.18/kernel/drivers/net/e100.ko
> /lib/modules/2.6.22.18/kernel/drivers/net/tun.ko
> /lib/modules/2.6.22.18/kernel/drivers/scsi/scsi_wait_scan.ko
> /lib/modules/2.6.22.18/kernel/drivers/scsi/sr_mod.ko
> /lib/modules/2.6.22.18/kernel/drivers/scsi/thor/mv61xx.ko
> /lib/modules/2.6.22.18/kernel/drivers/char/hw_random/rng-core.ko
> /lib/modules/2.6.22.18/kernel/drivers/usb/gadget/g_ether.ko
> /lib/modules/2.6.22.18/kernel/drivers/usb/gadget/g_zero.ko
> /lib/modules/2.6.22.18/kernel/drivers/usb/gadget/g_file_storage.ko
> /lib/modules/2.6.22.18/kernel/drivers/usb/misc/usbtest.ko
> /lib/modules/2.6.22.18/kernel/drivers/cdrom/cdrom.ko
> /lib/modules/2.6.22.18/kernel/crypto/pcbc.ko
> /lib/modules/2.6.22.18/kernel/crypto/ecb.ko
> -bash-3.2# uname -a
> Linux OpenRD 2.6.22.18 #2 Wed Mar 3 03:39:49 EST 2010 armv5tejl armv5tejl armv5tejl GNU/Linux
>
>
> Does anybody has an idea or a suggestion ?
>
> Have a nice week-end,
>
> --
> Charles Plessy
> Tsurumi, Kanagawa, Japan
>
>
> --
> To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> Archive: 20100508123214.GB14069@kunpuu.plessy.org">http://lists.debian.org/20100508123214.GB14069@kunpuu.plessy.org
>
>



-- 
-- Sujit K M

blog(http://kmsujit.blogspot.com/)


Reply to: