I've been trying for ages to try and get my T-Mobile E220 modem working
on my Linksys NSLU2 but I can't for love nor money and hoping someone on here can help me,
here's some info.... Linux nslu2 2.6.26-2-ixp4xx #1 Thu Aug 20 02:40:52 UTC 2009 armv5tel GNU/Linux Bus 003 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Mod dmesg [42950609.840000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [42950609.860000] option 3-1:1.0: device disconnected [42950609.860000] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [42950609.870000] option 3-1:1.1: device disconnected [42950646.950000] usb 3-1: new full speed USB device using ohci_hcd and address 5 [42950647.130000] usb 3-1: configuration #1 chosen from 1 choice [42950647.160000] scsi8 : SCSI emulation for USB Mass Storage devices [42950647.170000] usb 3-1: New USB device found, idVendor=12d1, idProduct=1003 [42950647.180000] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42950647.180000] usb 3-1: Product: HUAWEI Mobile [42950647.190000] usb 3-1: Manufacturer: HUAWEI Technologies [42950647.190000] usb 3-1: USB disconnect, address 5 [42950647.210000] usb-storage: device found at 5 [42950647.210000] usb-storage: waiting for device to settle before scanning [42950647.970000] usb 3-1: new full speed USB device using ohci_hcd and address 6 I tried usb_modeswitch -v 0x12d1 -p 0x1003 -d 1 usb_modeswitch -v 0x12d1 -p 0x1003 -H 1 dmesg showed [42950648.160000] usb 3-1: configuration #1 chosen from 1 choice [42950648.170000] usb-storage: probe of 3-1:1.0 failed with error -5 [42950648.170000] option 3-1:1.0: GSM modem (1-port) converter detected [42950648.180000] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [42950648.200000] usb-storage: probe of 3-1:1.1 failed with error -5 [42950648.200000] option 3-1:1.1: GSM modem (1-port) converter detected [42950648.210000] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [42950648.250000] scsi11 : SCSI emulation for USB Mass Storage devices [42950648.260000] usb 3-1: New USB device found, idVendor=12d1, idProduct=1003 [42950648.260000] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [42950648.270000] usb 3-1: Product: HUAWEI Mobile [42950648.280000] usb 3-1: Manufacturer: HUAWEI Technologies [42950648.290000] usb-storage: device found at 6 [42950648.290000] usb-storage: waiting for device to settle before scanning [42950653.290000] usb-storage: device scan complete [42950653.300000] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [42950653.380000] sr0: scsi-1 drive [42950653.380000] sr 11:0:0:0: Attached scsi CD-ROM sr0 [42950653.380000] sr 11:0:0:0: Attached scsi generic sg1 type 5 wvdialconf Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- OK ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei ttyUSB0<*1>: Speed 9600: AT -- OK ttyUSB0<*1>: Max speed is 9600; that should be safe. ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- OK ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: huawei ttyUSB1<*1>: Speed 9600: AT -- OK ttyUSB1<*1>: Max speed is 9600; that should be safe. ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB0. Modem configuration written to /etc/wvdial.conf. ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT&FE0V1X1&D2&C1S0=0 AT&FE0V1X1&D2&C1S0=0 OK --> Modem initialized. wvdial: utils/wvtask.cc:198: WvTaskMan::WvTaskMan(): Assertion `getcontext(&get_stack_return) == 0' failed. Aborted New! Receive and respond to mail from other email accounts from within Hotmail Find out how. |