Re: nslu2: two devices: one by default

[Xan <dxpublica@telefonica.net>]

En/na Lennart Sorensen ha escrit:
> > # script wlan0
> >
> > produces
> >
> > # route
> > Kernel IP routing table
> > Destination     Gateway         Genmask         Flags Metric Ref    Use  
> > Iface
> > localnet        *               255.255.0.0     U     0      0        0  
> > wlan0
> > localnet        *               255.255.0.0     U     0      0        0 eth0
> > default         172.26.0.1      0.0.0.0         UG    0      0        0  
> > wlan0
> > default         172.26.0.1      0.0.0.0         UG    0      0        0 eth0
> >     
>
> Controlling the order seems tricky.
>   
How can I reorder them? via route command? All wlan0 //at top//

> Simpler setup is to just use different IPs and subnets on eth and wlan,
> although if both come from the same network that doesn't work of course.

Different subnets is not an option, I think. I have a router which is 
the local gateway 172.26.0.1, mask 255.255.0.0. If I change mask in 
172.26.0.2 (eth0) or 172.26.0.3 (wlan0), the router will be unreacheable.

How can I do that?

Thanks,
Xan.