[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Sheevaplug running Debian won't boot after initial "apt-get dist-upgrade"

Martin Michlmayr wrote:
> * John Winters <john@sinodun.org.uk> [2009-09-12 15:33]:
>> I've successfully installed Debian Lenny onto an SD card in my new
>> SheevaPlug and it booted fine.  I then followed Martin's instructions
>> for fine detail adjustments (renaming the host, adding ntp, "apt-get
>> dist-upgrade" etc.) before attempting to re-boot.  I did one extra
>> thing, which was to edit /etc/fstab to reflect where my / partition
>> was - on the MMC card.  Without that the "apt-get dist-upgrade"
>> failed.  I then finished off the upgrade and re-booted.
> Yep, but this is actually documented:
>  | If you're using an SD card, you have to edit /mnt/etc/fstab and
>  | replace /dev/sda1 with /dev/mmcblk0p1 and /dev/sda2 with
>  | /dev/mmcblk0p2. If you're using a USB stick, you don't have to edit
>  | this file.

So it is.  Sorry - I missed that.


Reply to: