Re: Re: NSLU2 Debian Installer Erroneous asking for an IP address
A simple workaround for people having problem with this. Wait to
plug-in the network cable until the slug finished booting. It will
fail to get a dhcp address and will fallback to static ip.
Greets
On Jan 8, 2008 7:49 PM, Mike (mwester) <mwester@dls.net> wrote:
> So, basically even though the user has specified a static IP, the unit
> DHCP's anyway. Considering that a well-behaved DHCP server will probe the
> active addresses, it's *guaranteed* that not even by accident will the NSLU2
> get the static IP that the user set. Hence the device is "lost on the
> ether".
>
> Debugging this situation is difficult for the novice. First, the user set a
> static IP -- there's no reason for them to go check their router to see if
> it issued a DHCP IP in the first place; they're not expecting that to
> happen. Secondly, many routers don't even provide a means to check what
> DHCP has done, so the user can't discover the IP even if a wiki or document
> told them to do so (I believe that Linksys, one of the most common routers
> in this area, is one such vendor).
>
> Personally, I find this behavior of the installer to be wrong, in the same
> way that I would be angry if my automobile took it upon itself to turn the
> steering wheel for me, because I happened to leave the turn-signal activated
> for too long. But I'm not a Debian user (I just happen to frequent the
> #nslu2-general IRC channel where this issue has become so commonly asked).
>
> IMO, if this behavior is retained, it needs a gigantic red box (flashing,
> preferably) on the web pages describing the installation process. Many of
> the users I encounter on that IRC channel are truely novices, so the text
> also should not just limit itself to outlining the behavior, but the
> implications of it as well (that the unit will DHCP and that many users may
> not have routers that offer the ability to see what the DHCP IP might have
> been, resulting in an NLSU2 on the network that is well and truely lost).
> And, no, running nmap to find it is not an option for most of these users!
>
> Regards,
> Mike (mwester)
>
>
>
> --
> To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Reply to: