[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: APEX compactflash loading Problems



So it turns out that the partition for the APEX bootloader must be 32 MB. 
However, now I am running into another problem trying to boot the kernel.  I
get stuck in a loop of some sort as soon below

apex> copy ext2://1/boot/zImage-lpd79520-2.6.12 $bootaddr
# copy ext2://1/boot/zImage-lpd79520-2.6.12 0x20008000
1162672 bytes transferred
apex> boot console=ttyAM1,115200 root=/dev/hda1 3
ATAG_HEADER
ATAG_MEM: start 0x20000000  size 0x02000000
ATAG_CMDLINE: (39 bytes) 'console=ttyAM1,115200 root=/dev/hda1 3'
ATAG_END
Booting kernel at 0x20008000...
Uncompressing
Linux.............................................................
Linux version 2.6.12 (vchang@localhost.localdomain) (gcc version 3.4.1) #2
Tue 8
CPU: ARM720T [41807203] revision 3 (ARMv4T)
Machine: Logic Product Development LPD79520-10
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttyAM1,115200 root=/dev/hda1 3
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 29952KB available (2016K code, 319K data, 96K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
CLCD: registering amba devices
  0 -> 0
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
CLCD: lh7952x FB hardware, 3.5in LMQVGA display
Console: switching to colour frame buffer device 80x40
Real Time Clock Driver v1.12
ttyAM0 at MMIO 0xfffc0000 (irq = 23) is a LH7952X
ttyAM1 at MMIO 0xfffc1000 (irq = 24) is a LH7952X
ttyAM2 at MMIO 0xfffc2000 (irq = 25) is a LH7952X
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
smc91x: IOADDR c2854000 doesn't match configuration (300).
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at c2854000 IRQ 32 [nowait]
eth0: Ethernet addr: 00:08:ee:00:64:8d
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
hda: probing with STATUS(0x50) instead of ALTSTATUS(0x67)
hda: SanDisk SDCFB-128, CFA DISK drive
ide0 at 0xf5021000-0xf5021007,0xf5021808 on irq -1
hda: max request size: 128KiB
hda: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32
hda: cache flushes not supported
hda: hda1 hda2
physmap flash device: 1000000 at 40000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
RedBoot partition parsing not available
input: ads7843-lh7 ADS7843 touchscreen driver
Advanced Linux Sound Architecture Driver Version 1.0.9rc2  (Thu Mar 24
10:33:39.
ALSA device list:
  #0:
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
NET: Registered protocol family 1
NET: Registered protocol family 17
hda: hda1 hda2
hda: hda1 hda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 96K
LDMSTM: PC = c011d9e0, instr = e8ae000f, addr = c1c18802, eaddr = c1c187f6

Pid: 3, comm:            events/0
CPU: 0
PC is at soft_cursor+0x8c/0x1dc
LR is at 0xc1c187f6
pc : [<c011d9e0>]    lr : [<c1c187f6>]    Not tainted
sp : c02f5e64  ip : c02f5eec  fp : c02f5ea8
r10: 00000000  r9 : 00000000  r8 : c1c187e0
r7 : c037ec00  r6 : c02f5ebc  r5 : 00000006  r4 : c1c187e6
r3 : c0225ab4  r2 : c02cf801  r1 : 00000000  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  Segment kernel
Control: 217F  Table: 20004017  DAC: 00000017
[<c00284c4>] (do_alignment_ldmstm+0x0/0x290) from [<c0028ab0>]
(do_alignment+0x)
[<c0028754>] (do_alignment+0x0/0x510) from [<c0027784>]
(do_DataAbort+0x3c/0x9c)
[<c0027748>] (do_DataAbort+0x0/0x9c) from [<c002079c>]
(__dabt_svc+0x3c/0x60)
r8 = E8AE000F  r7 = C1C187F6  r6 = 00000004  r5 = 000E0000
r4 = FFFFFFFF
[<c011d954>] (soft_cursor+0x0/0x1dc) from [<c0117cc0>]
(bit_cursor+0x48c/0x4a0)
[<c0117834>] (bit_cursor+0x0/0x4a0) from [<c0112548>]
(fb_flashcursor+0x260/0x2)
[<c01122e8>] (fb_flashcursor+0x0/0x290) from [<c00470fc>]
(worker_thread+0x1ec/)
[<c0046f10>] (worker_thread+0x0/0x298) from [<c004b714>]
(kthread+0xe4/0x114)
[<c004b630>] (kthread+0x0/0x114) from [<c00384cc>] (do_exit+0x0/0xaa4)
r8 = 00000000  r7 = 00000000  r6 = 00000000  r5 = 00000000
r4 = 00000000
LDMSTM: PC = c011d9e0, instr = e8ae000f, addr = c1c18802, eaddr = c1c187f6

Pid: 3, comm:            events/0
CPU: 0
PC is at soft_cursor+0x8c/0x1dc
LR is at 0xc1c187f6
pc : [<c011d9e0>]    lr : [<c1c187f6>]    Not tainted
sp : c02f5e64  ip : c02f5eec  fp : c02f5ea8
r10: 00000000  r9 : 00000000  r8 : c1c187e0
r7 : c037ec00  r6 : c02f5ebc  r5 : 00000006  r4 : c1c187e6
r3 : c0225ab4  r2 : c01f3301  r1 : 00000000  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  Segment kernel
Control: 217F  Table: 20004017  DAC: 00000017
[<c00284c4>] (do_alignment_ldmstm+0x0/0x290) from [<c0028ab0>]
(do_alignment+0x)
[<c0028754>] (do_alignment+0x0/0x510) from [<c0027784>]
(do_DataAbort+0x3c/0x9c)
[<c0027748>] (do_DataAbort+0x0/0x9c) from [<c002079c>]
(__dabt_svc+0x3c/0x60)
r8 = E8AE000F  r7 = C1C187F6  r6 = 00000004  r5 = 000E0000
r4 = FFFFFFFF
[<c011d954>] (soft_cursor+0x0/0x1dc) from [<c0117cc0>]
(bit_cursor+0x48c/0x4a0)
[<c0117834>] (bit_cursor+0x0/0x4a0) from [<c0112548>]
(fb_flashcursor+0x260/0x2)
[<c01122e8>] (fb_flashcursor+0x0/0x290) from [<c00470fc>]
(worker_thread+0x1ec/)
[<c0046f10>] (worker_thread+0x0/0x298) from [<c004b714>]
(kthread+0xe4/0x114)
[<c004b630>] (kthread+0x0/0x114) from [<c00384cc>] (do_exit+0x0/0xaa4)
r8 = 00000000  r7 = 00000000  r6 = 00000000  r5 = 00000000
r4 = 00000000
LDMSTM: PC = c011d9e0, instr = e8ae000f, addr = c1c18802, eaddr = c1c187f6

Pid: 3, comm:            events/0
CPU: 0
PC is at soft_cursor+0x8c/0x1dc
LR is at 0xc1c187f6
pc : [<c011d9e0>]    lr : [<c1c187f6>]    Not tainted
sp : c02f5e64  ip : c02f5eec  fp : c02f5ea8
r10: 00000000  r9 : 00000000  r8 : c1c187e0
r7 : c037ec00  r6 : c02f5ebc  r5 : 00000006  r4 : c1c187e6
r3 : c0225ab4  r2 : c01f3301  r1 : 00000000  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  Segment kernel
Control: 217F  Table: 2000C017  DAC: 00000017
[<c00284c4>] (do_alignment_ldmstm+0x0/0x290) from [<c0028ab0>]
(do_alignment+0x)
[<c0028754>] (do_alignment+0x0/0x510) from [<c0027784>]
(do_DataAbort+0x3c/0x9c)
[<c0027748>] (do_DataAbort+0x0/0x9c) from [<c002079c>]
(__dabt_svc+0x3c/0x60)
r8 = E8AE000F  r7 = C1C187F6  r6 = 00000004  r5 = 000E0000
r4 = FFFFFFFF
[<c011d954>] (soft_cursor+0x0/0x1dc) from [<c0117cc0>]
(bit_cursor+0x48c/0x4a0)
[<c0117834>] (bit_cursor+0x0/0x4a0) from [<c0112548>]
(fb_flashcursor+0x260/0x2)
[<c01122e8>] (fb_flashcursor+0x0/0x290) from [<c00470fc>]
(worker_thread+0x1ec/)
[<c0046f10>] (worker_thread+0x0/0x298) from [<c004b714>]
(kthread+0xe4/0x114)
[<c004b630>] (kthread+0x0/0x114) from [<c00384cc>] (do_exit+0x0/0xaa4)
r8 = 00000000  r7 = 00000000  r6 = 00000000  r5 = 00000000
r4 = 00000000
LDMSTM: PC = c011d9e0, instr = e8ae000f, addr = c1c18802, eaddr = c1c187f6

Pid: 3, comm:            events/0
CPU: 0
PC is at soft_cursor+0x8c/0x1dc
LR is at 0xc1c187f6
pc : [<c011d9e0>]    lr : [<c1c187f6>]    Not tainted
sp : c02f5e64  ip : c02f5eec  fp : c02f5ea8
r10: 00000000  r9 : 00000000  r8 : c1c187e0
r7 : c037ec00  r6 : c02f5ebc  r5 : 00000006  r4 : c1c187e6
r3 : c0225ab4  r2 : c01f3301  r1 : 00000000  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  Segment kernel
Control: 217F  Table: 2000C017  DAC: 00000017
[<c00284c4>] (do_alignment_ldmstm+0x0/0x290) from [<c0028ab0>]
(do_alignment+0x)
[<c0028754>] (do_alignment+0x0/0x510) from [<c0027784>]
(do_DataAbort+0x3c/0x9c)
[<c0027748>] (do_DataAbort+0x0/0x9c) from [<c002079c>]
(__dabt_svc+0x3c/0x60)
r8 = E8AE000F  r7 = C1C187F6  r6 = 00000004  r5 = 000E0000
r4 = FFFFFFFF
[<c011d954>] (soft_cursor+0x0/0x1dc) from [<c0117cc0>]
(bit_cursor+0x48c/0x4a0)
[<c0117834>] (bit_cursor+0x0/0x4a0) from [<c0112548>]
(fb_flashcursor+0x260/0x2)
[<c01122e8>] (fb_flashcursor+0x0/0x290) from [<c00470fc>]
(worker_thread+0x1ec/)
[<c0046f10>] (worker_thread+0x0/0x298) from [<c004b714>]
(kthread+0xe4/0x114)
[<c004b630>] (kthread+0x0/0x114) from [<c00384cc>] (do_exit+0x0/0xaa4)
r8 = 00000000  r7 = 00000000  r6 = 00000000  r5 = 00000000
r4 = 00000000

...

-- 
View this message in context: http://www.nabble.com/APEX-compactflash-loading-Problems-tp16043820p16069733.html
Sent from the debian-arm mailing list archive at Nabble.com.


Reply to: