Kernel panics on new machine
Hi folks, I am over my head here with kernel panics...
I've got a shiny new system: Tyan S2865 (nforce 4 ultra), AMD Athlon
x2 3800+, a single SATA-2 drive and 1gb of DDR400 RAM. The board and
CPU are brand new, the drive and RAM came from a desktop machine
which I had no problems with so I think those things are ok. I did
notice the bios was really old, so I flashed it up to the latest
version.
I installed Etch fresh using the netinst image, and for a little
while, the system seems fine. But then it sort of crashes (it's
still pingable, nothing else works, no response on console) with the
below text on console.
It usually seems to happen with disk activity, so to test it I just
make a big empty file with dd.
I've never encountered problems like this before, any suggestions on
what I might try?
thanks -
Rob
--=-=--==---- output from serial console ----==--=-=--
LILO 22.6.1 Loading
Linux...................................................................
..........................................................
BIOS data check successful
Bootdata ok (command line is auto BOOT_IMAGE=Linux ro root=802
console=ttyS0,38400 console=ttyS0,38400)
Linux version 2.6.18-5-amd64 (Debian 2.6.18.dfsg.1-13etch4)
(dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP Tue Oct 2 20:3
7:02 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000097800 (usable)
BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.3 present.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-40000000
Bootmem setup node 0 0000000000000000-000000003fee0000
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 256065
Kernel command line: auto BOOT_IMAGE=Linux ro root=802
console=ttyS0,38400 console=ttyS0,38400
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 2009.281 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ 0 size 32 MB
No AGP bridge found
Memory: 1022564k/1047424k available (1927k kernel code, 24440k
reserved, 868k data, 176k init)
Calibrating delay using timer specific routine.. 4021.73 BogoMIPS
(lpj=8043465)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12558026
Detected 12.558 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.78 BogoMIPS
(lpj=8037575)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 545
cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=266
checking if image is initramfs... it is
Bad page state in process 'swapper'
page:ffff81003fe8ca98 flags:0x0100000000000000 mapping:
0000000010000000 mapcount:0 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[<ffffffff802a7124>] bad_page+0x4e/0x78
[<ffffffff80209f65>] get_page_from_freelist+0x26d/0x3a6
[<ffffffff8020de4a>] __alloc_pages+0x5c/0x2a9
[<ffffffff80221647>] alloc_page_interleave+0x3d/0x6f
[<ffffffff8020e7f0>] generic_file_buffered_write+0x19a/0x5bb
[<ffffffff8020d5b1>] current_fs_time+0x3b/0x40
[<ffffffff80214379>] __generic_file_aio_write_nolock+0x2e4/0x32f
[<ffffffff802a59da>] __generic_file_write_nolock+0x8f/0xa8
[<ffffffff8028fa1b>] autoremove_wake_function+0x0/0x2e
[<ffffffff802414ff>] generic_file_write+0x49/0xa7
[<ffffffff80214966>] vfs_write+0xce/0x174
[<ffffffff802151f0>] sys_write+0x45/0x6e
[<ffffffff8053e458>] do_copy+0x65/0x91
[<ffffffff8053d376>] write_buffer+0x1d/0x2b
[<ffffffff8053d3f0>] flush_window+0x6c/0xca
[<ffffffff8053d9b4>] inflate_codes+0x38b/0x3e8
[<ffffffff8053eb49>] inflate_dynamic+0x4f3/0x53f
[<ffffffff8053f059>] unpack_to_rootfs+0x4c4/0x923
[<ffffffff8053f542>] populate_rootfs+0x8a/0xde
[<ffffffff80260ae6>] init+0xd2/0x30b
[<ffffffff802589e0>] child_rip+0xa/0x12
[<ffffffff80331f99>] acpi_ds_init_one_object+0x0/0x80
[<ffffffff80260a14>] init+0x0/0x30b
[<ffffffff802589d6>] child_rip+0x0/0x12
Freeing initrd memory: 4880k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs<7>Losing some ticks... checking
if CPU frequency changed.
3 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
a report
PCI-DMA: Disabling IOMMU.
pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: a000-afff
MEM window: fe900000-fe9fffff
PREFETCH window: fea00000-feafffff
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: fe800000-fe8fffff
PREFETCH window: fe700000-fe7fffff
PCI: Bridge: 0000:00:0c.0
IO window: 8000-8fff
MEM window: fe600000-fe6fffff
PREFETCH window: fe500000-fe5fffff
PCI: Bridge: 0000:00:0d.0
IO window: 7000-7fff
MEM window: fe400000-fe4fffff
PREFETCH window: fe300000-fe3fffff
PCI: Bridge: 0000:00:0e.0
IO window: 6000-6fff
MEM window: fe200000-fe2fffff
PREFETCH window: fe100000-fe1fffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1192393701.708:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Linking AER extended capability on 0000:00:0e.0
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 176k freed
Loading, please wait...
input: AT Translated Set 2 keyboard as /class/input/input0
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
GSI 16 sharing vector 0xD9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level,
low) -> IRQ 217
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: irq 217, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
GSI 17 sharing vector 0xE1 and IRQ 17
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level,
low) -> IRQ 225
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 225, io mem 0xfebff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 18 sharing vector 0xE9 and IRQ 18
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 233
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233] MMIO=[fe9ff000-
fe9ff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
SCSI subsystem initialized
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level,
low) -> IRQ 50
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 010f1:2865 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level,
low) -> IRQ 58
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 58
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 58
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8, max UDMA7, 781420655 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: SAMSUNG HD403LJ Rev: CT10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level,
low) -> IRQ 217
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 217
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 217
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
SCSI device sda: 781420655 512-byte hdwr sectors (400087 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 781420655 512-byte hdwr sectors (400087 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
kinit: name_to_dAttempting manual resume
ev_t(/dev/sda1) = sda1(8,1)
kinit: trying to resume from /dev/sSGI XFS with ACLs, security
attributes, realtime, large block/inode numbers, no debug enabled
da1
kinit: No rSGI XFS Quota Management subsystem
esume image, doing normal boot...
Done.
XFS mounting filesystem sda2
Starting XFS recovery on filesystem: sda2 (logdev: internal)
Ending XFS recovery on filesystem: sda2 (logdev: internal)
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...ACPI: PCI Interrupt Link
[APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level,
low) -> IRQ 225
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
input: PC Speaker as /class/input/input1
intel8x0_measure_ac97_clock: measured 58769 usecs
intel8x0: clocking to 47015
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Intel 810 + AC97 Audio, version 1.01, 20:51:50 Oct 2 2007
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
done.
Activating swap...Adding 4000176k swap on /dev/sda1. Priority:-1
extents:1 across:4000176k
done.
Checking root file system...fsck 1.40-WIP (14-Nov-2006)
/sbin/fsck.xfs: XFS file system.
done.
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
done.
Loading device-mapper supportdevice-mapper: ioctl: 4.7.0-ioctl
(2006-06-24) initialised: dm-devel@redhat.com
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon....
Setting console screen modes and fonts.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Zaptel telephony kernel driver: FATAL: Module ztdummy not found.
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'
1 error(s) detected
/sbin/ztcfg failed. Check /etc/zaptel.confzaptel.
Starting portmap daemon...Already running..
Starting MySQL database server: mysqld.
Checking for corrupt, not cleanly closed and upgrade needing tables..
Loading ACPI modules:
battery
ac
processor
button
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
fan
thermal
Starting Advanced Configuration and Power Interface daemon: acpid.
Starting internet superserver: inetd.
Starting Postfix Mail Transport Agent: postfix.
Starting SlimServer Audio Server.
Enabling S.M.A.R.T..../dev/sda...unable to fetch IEC (SMART) mode
page [unsupported field in scsi command]
(failed)...done.
Starting S.M.A.R.T. daemon: smartd ESC[31mfailed!ESC[m
Starting OpenBSD Secure Shell server: sshdNET: Registered protocol
family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Starting NFS common utilities: statd.
Starting NTP server: ntpd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Debian GNU/Linux 4.0 flame ttyS0
flame login: slimserver[2292]: segfault at 000000000020000e rip
00002abcf5f38db1 rsp 00007fffb4d0c550 error 4
Debian GNU/Linux 4.0 flame ttyS0
flame login:
Debian GNU/Linux 4.0 flame ttyS0
flame login: root
Password:
Last login: Sun Oct 14 14:50:06 2007 on ttyS0
Linux flame 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64
The programs included with the Debian GNU/Linux system are free
software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
flame:~# dd ifESC[K-ESC[ESC[K=/dev/zero of=file.img bs=1024
count=1000000
1000000+0 records in
1000000+0 records out
1024000000 bytes (1.0 GB) copied, 20.5224 seconds, 49.9 MB/s
flame:~# dd if=/dev/zero of=file.img bs=1024 count=100000000
Unable to handle kernel paging request at 0000000000003830 RIP:
[<ffffffff802a6ae7>] page_to_pfn+0x19/0x33
PGD 3cbf2067 PUD 3ecf7067 PMD 0
Oops: 0000 [1] SMP
CPU 0
Modules linked in: ipv6 button ac battery dm_snapshot dm_mirror
dm_mod sbp2 loop psmouse i2c_nforce2 i810_audio ac97_codec serio_raw
floppy parport_pc parport e
vdev i2c_core pcspkr eth1394 snd_intel8x0 snd_ac97_codec snd_ac97_bus
snd_pcm snd_timer snd soundcore snd_page_alloc xfs ide_generic sd_mod
sata_nv libata scsi_
mod ohci1394 ieee1394 amd74xx generic ohci_hcd forcedeth ide_core
ehci_hcd thermal processor fan
Pid: 0, comm: swapper Tainted: G B 2.6.18-5-amd64 #1
RIP: 0010:[<ffffffff802a6ae7>] [<ffffffff802a6ae7>] page_to_pfn
+0x19/0x33
RSP: 0018:ffffffff804c0dc8 EFLAGS: 00010217
RAX: 6db6db6db6db6db7 RBX: ffff8100273afe78 RCX: ffff81000e1a2000
RDX: 0000000000000000 RSI: 000000000000c000 RDI: ffff81000f5b4000
RBP: ffff81000f64f740 R08: ffff81003d739d70 R09: 0000000000002000
R10: 0000000000002000 R11: ffffffff88177a64 R12: ffff81003dfbd2c0
R13: ffff8100273afe78 R14: 000000000000c000 R15: 0000000000008000
FS: 0000000043806960(0000) GS:ffffffff80521000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000003830 CR3: 000000003c40b000 CR4: 00000000000006e0
Process swapper (pid: 0, threadinfo ffffffff80530000, task
ffffffff804494c0)
Stack: ffffffff8022b215 ffff81003d6a7500 0000040000000000
0000010000000000
ffff81003f01cfa8 ffffffff880fe903 ffff8100273afe78 ffff81003d6a7500
ffff81003dfbd2c0 0000000000000001 0000000000000001 0000000000000000
Call Trace:
<IRQ> [<ffffffff8022b215>] __end_that_request_first+0x317/0x49e
[<ffffffff880fe903>] :libata:ata_scsi_qc_complete+0xbc/0xcc
[<ffffffff880d5bdd>] :scsi_mod:scsi_end_request+0x27/0xcb
[<ffffffff880d5dd7>] :scsi_mod:scsi_io_completion+0x156/0x334
[<ffffffff80286c06>] current_tick_length+0x5/0x26
[<ffffffff8028755d>] do_timer+0x2cc/0x520
[<ffffffff8811b4a3>] :sd_mod:sd_rw_intr+0x217/0x244
[<ffffffff880fb4d5>] :libata:ata_host_intr+0xb9/0xce
[<ffffffff880d6075>] :scsi_mod:scsi_device_unbusy+0x67/0x81
[<ffffffff8023551e>] blk_done_softirq+0x5f/0x6d
[<ffffffff80210381>] __do_softirq+0x5e/0xd5
[<ffffffff8026dc43>] end_level_ioapic_vector+0x9/0x16
[<ffffffff80258d2c>] call_softirq+0x1c/0x28
[<ffffffff802636c9>] do_softirq+0x2c/0x7d
[<ffffffff80263694>] do_IRQ+0x6a/0x73
[<ffffffff8026177d>] default_idle+0x0/0x50
[<ffffffff80258051>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff80240e42>] mempool_free_slab+0x0/0xe
[<ffffffff802617a6>] default_idle+0x29/0x50
[<ffffffff80245034>] cpu_idle+0x95/0xb8
[<ffffffff8053a799>] start_kernel+0x216/0x21b
[<ffffffff8053a288>] _sinittext+0x288/0x28c
Code: 48 2b ba 30 38 00 00 48 c1 ff 03 48 0f af f8 48 03 ba 40 38
RIP [<ffffffff802a6ae7>] page_to_pfn+0x19/0x33
RSP <ffffffff804c0dc8>
CR2: 0000000000003830
<0>Kernel panic - not syncing: Aiee, killing interrupt handler!
Reply to: