Re: hard disk fails? / mounted read-only
On Tue, Apr 25, 2006 at 05:53:04PM -0500, Igor TAmara wrote:
> On Deb 2.6.12 I seen on dmesg lines like :
>
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
BadCRC means cable errors. Make sure you're using an 80 pin cable and
that the master device is at the end of the cable. If that's all
correct, replace the cable.
Erik
--
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
Reply to: