Re: DVD/CD Woes
try the 'generic' kernel. the k8 kernel segfaults (could
be a page fault) when i try to use my cdrom in anyway.
but generic is fine.
ive submitted a bug report. im not convinced that maintainers
read them though. as Eterm also misbehaves on amd64 and the
bugreport hasnt recieved any attention.
pity, eterm is the only decent terminal :P
but seriously, try the 'generic' kernel.
Dean
On Tue, October 25, 2005 2:09 pm, John Baab said:
> I seem to be having some problems with my optical drives, I cannot
> remember
> when the last time is that I used them successfully though. My current
> setup
> includes 2 optical drives:
> Lite-On LDW-811S (primary)(dvdrw)
> Lite-On LTR-52327S (secondary)(cdrw)
>
> Motherboard: asus K8V se deluxe
>
> If I go into the disk manager I see both my optical drives, but the DVD
> burner does not have a check next to 'Write DVD'. Everything else looks
> fine
> in there. The problem with the secondary drive is that it does not
> automount. I can burn cd's on both burners, but not dvd's on the dvd
> burner.
> The cd burner when ejected immediatly sucks the tray back in, which is
> very
> odd. I can burn from both burners in windows just fine, so it doesn't look
> like a hardware problem.
>
> k3b output:
> System
> -----------------------
> K3b Version: 0.12.5
>
> KDE Version: 3.4.2
> QT Version: 3.3.5
> Kernel: 2.6.11-9-amd64-k8
> Devices
> -----------------------
> LITE-ON DVDRW LDW-811S HS0R (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW;
> CD-ROM; DVD-ROM; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW
> Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R;
> CD-RW]
> [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R;
> Restricted
> Overwrite]
>
> LITE-ON LTR-52327S QS0E (/dev/hdd, ) at /media/cdrom1 [CD-R; CD-RW;
> CD-ROM]
> [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16;
> RAW/R96P;
> RAW/R96R]
> K3b
> -----------------------
> Size of filesystem calculated: 89492
>
> Used versions
> -----------------------
> mkisofs: 2.1.1a03-unofficial-iconv
> growisofs: 5.21
>
> growisofs
> -----------------------
> Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdc obs=32k seek=0'
> /dev/hdc: "Current Write Speed" is 2.0x1385KBps.
> :-[ WRITE@LBA=0h failed with SK=5h/ASC=64h/ACQ=00h]: Input/output error
> :-( attempt to re-run with -dvd-compat -dvd-compat to engage DAO or apply
> full blanking procedure
> :-( write failed: Input/output error
>
> growisofs command:
> -----------------------
> /usr/bin/growisofs -Z /dev/hdc=/dev/fd/0 -use-the-force-luke=notray
> -use-the-force-luke=tty -use-the-force-luke=tracksize:89492 -dvd-compat
> -speed=2
>
> mkisofs
> -----------------------
> 89492
> INFO: ISO-8859-1 character encoding detected by locale settings.
> Assuming ISO-8859-1 encoded filenames on source filesystem,
> use -input-charset to override.
> /usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
>
> mkisofs command:
> -----------------------
> /usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset
>
>
>
> Here is my fstab:
> # /etc/fstab: static file system information.
> #
> # <file system> <mount point> <type> <options> <dump> <pass>
> proc /proc proc defaults 0 0
> /dev/sda2 / ext3 defaults,errors=remount-ro 0 1
> /dev/sda6 /home ext3 defaults 0 2
> /dev/sda5 none swap sw 0 0
> /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
> /dev/hdd /media/cdrom1 iso9660 ro,user,noauto 0 0
> /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
> /dev/hda1 /mnt/hda vfat auto,users,rw,umask=000 0 0
> /dev/sdb /mnt/usb vfat auto,users,rw,umask=000 0 0
>
>
> A quick search says that maybe my problem is udev, has anyone else been
> seeing any problems?
> -Thanks, John
>
Reply to: