Re: Motherboard Report: Gigabyte GA-7A8DW
Dear Len Sorensen,
Actully I'm new in debian, I down load mini.iso from
http://amd64.debian.net/debian-installer/2005-08-30/monolithic/,
then start the installation and finished it, I used lilo to boot the system
and after the system checked my scsi card then system show some error
message.
The error message like this:
hotplug[374] trap invalid operand rip:2a959c74e7 rsp:7fbfffa00 error:0
hotplug[374] trap invalid operand rip:2a959c74e7 rsp:7fbfffa00 error:0
sh[373] trap invalid operand rip:2a959c74e7 rsp:7fbfffa00 error:0
.
.
.
.
INIT: hotpug[385]trap invalid operand rip:2a959c74e7 rsp:7fbfffa00 error:0
hotplug[374] trap invalid operand rip:2a959c74e7 rsp:7fbfffa00 error:0
hotplug[374] trap invalid operand rip:2a959c74e7 rsp:7fbfffa00 error:0
.
.
.
Id "1" respawning too fast: disabled for 5 miniuteshotpug[388] trap invalid
operand rip:2a959c74e7 rsp:7fbfffa00 error:0
My system use
Opteron 242 CPU X2
RAM 1G
AGP NVIDIA
SCSI CARD ADAPTEC 29320LP
SCSI HDD Segate 36g
My english is so pool, I hope you all understand what I mean.
Thanks
Lennart Sorensen <lsorense@csclub.uwaterloo.ca> 寫:
>On Wed, Aug 31, 2005 at 09:54:13AM +0800, Thomas Peng ????????? wrote:
>> hello,
>> I use the same bord as yours(GA-7A8DW),
>> but I can't install debian on it.
>> I use scsi HDD system, and my scsi card is
>> adaptech 29320LP.
>> I think amd 8131 chipset is not supported very well.
>
>Which part of the install didn't work for you?
>
>Len Sorensen
>
Reply to: