ACPI: S3 with problems
Hi there!
I'use the following system without any problems:
AMD Athlon64 Mobile 3000+
Radeon9700 Mobile
512 MB RAM
60 GB Fujitsu HDD.
Debian64 pure (not gcc3.4)
To bring the laptop into S3 i have to execute the following things:
Boot with 'vga=normal acpi_sleep=s3_bios'
rmmod all modules
stop acpid
stop hotplug
stop pcmcia
No the weakup works.
But there's somewhere a problem: (dmesg output)
PM: Preparing system for suspend
Stopping tasks: ====|
PM: Entering state.
hwsleep-0315 [65] acpi_enter_sleep_state: Entering sleep state [S3]
Back to C!
evgpe-0686: *** Error: acpi_ev_gpe_dispatch: No handler or method
for GPE[ 8], disabling event
PM: Finishing up.
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 177
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 185
Restarting tasks... done
Losing some ticks... checking if CPU frequency changed.
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
ide0: reset: success
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
---------------
The hda-errors occur after the first hdd-activity after the weakup.
But after this errors the hda/ide-controller _seems_ to work again
without errors.
Does anybody have a hint for me (maybe also how to put the laptop into
S3 without nearly shutdown everything).
And another question: Is the ati-driver from the DRI-project S3-save?
Greets
Sebastian
Reply to: