Re: Re: fglrx, I should ask...
Thank´s, for all, I'll try Xorg
On Tue, 15 Feb 2005 03:03:14 -0700, the owner
<editor@postscript.port5.com> wrote:
> Jaime Ochoa Malagón wrote:
>
> > The ati driver say:
> >
> > (II) Primary Device is: PCI 01:00:0
> > (II) ATI: Candidate "Device" section "Radeon_Analog_Output".
> > (WW) ATI: PCI/AGP Mach64 in slot 1:0:0 could not be detected!
> > (WW) ATI: PCI/AGP Mach64 in slot 1:0:1 could not be detected!
>
> Yes. This happened to me also when updating my old XFree86
> just today. That must have changed recently. Sorry.
>
> > In this moment I succeed to run X with the radeon driver, disabling
> > all the Modules and then enabling one by one.
>
> Many congratulations!
>
> >> I would like to know how the fglrx does on glxgears. My
> >> Xorg is up to 2130 FPS with my Radeon 9250. Try this:
> >
> > I found it...
> > Sorry...
> >
> > (with vesa ~1600x...)
> > 2524 frames in 5.0 seconds = 504.800 FPS
> > 2760 frames in 5.0 seconds = 552.000 FPS
> > 2640 frames in 5.0 seconds = 528.000 FPS
>
> This looks fairly normal. The glxinfo should say "direct
> rendering: yes". If not then see:
> http://lists.debian.org/debian-amd64/2005/02/msg00401.html
>
> I have been using Xorg Server libraries and modules recently
> and have had 2169FPS. I switched back to Xfree today and had
> the same speed. Then I remembered the libraries and modules
> from Xorg were still in /usr/local. So here are the results
> with XFree86 Xserver using Xorg libs and Xorg modules:
>
> > Script started on Tue 15 Feb 2005 12:05:37 AM MST
> > libGL warning: 3D driver claims to not support visual 0x23
> > libGL warning: 3D driver claims to not support visual 0x24
> > libGL warning: 3D driver claims to not support visual 0x25
> > libGL warning: 3D driver claims to not support visual 0x26
> > libGL warning: 3D driver claims to not support visual 0x27
> > libGL warning: 3D driver claims to not support visual 0x28
> > libGL warning: 3D driver claims to not support visual 0x29
> > libGL warning: 3D driver claims to not support visual 0x2a
> > libGL warning: 3D driver claims to not support visual 0x2b
> > libGL warning: 3D driver claims to not support visual 0x2c
> > libGL warning: 3D driver claims to not support visual 0x2d
> > libGL warning: 3D driver claims to not support visual 0x2e
> > libGL warning: 3D driver claims to not support visual 0x2f
> > libGL warning: 3D driver claims to not support visual 0x30
> > libGL warning: 3D driver claims to not support visual 0x31
> > libGL warning: 3D driver claims to not support visual 0x32
> > 8644 frames in 5.0 seconds = 1728.800 FPS
> > 10842 frames in 5.0 seconds = 2168.400 FPS
> > 10842 frames in 5.0 seconds = 2168.400 FPS
> > 10843 frames in 5.0 seconds = 2168.600 FPS
> > 10842 frames in 5.0 seconds = 2168.400 FPS
> > 10842 frames in 5.0 seconds = 2168.400 FPS
> > 10843 frames in 5.0 seconds = 2168.600 FPS
> > 10842 frames in 5.0 seconds = 2168.400 FPS
> > 10842 frames in 5.0 seconds = 2168.400 FPS
> > 10843 frames in 5.0 seconds = 2168.600 FPS
> > 10842 frames in 5.0 seconds = 2168.400 FPS
> >
> > Script done on Tue 15 Feb 2005 12:06:36 AM MST
>
> That was the same as before! Then I took out the modules and
> had about 900FPS until I took out the Xorg libraries left in
> /usr/local. I took out the /usr/local and then I got the
> same 550FPS with plain Xfree all with glxinfo 'yes'. I hope
> they update the DRI inside Xfree soon because that works
> too! Anyway, I went back to Xorg X11R6.8.2 again.
>
> I built my own Xorg or there is a version at ubuntu that is
> supposed to work easily with Debian. If you want even faster
> GLX then the Xorg is much faster than the fglrx.
>
> Congratulations again.
>
> editor@postscript.port5.com
> ---------------------------------
> AMD Athlon64 @2.4Ghz Corsair TwinX1024-3200XL @480Mhz DDR
> ASUS A8V Deluxe Pro ASUS Radeon A9250Ge/Td/256
> Creative SB Live WD Raptor SATA Maxtor PATA IBM/Okidata
> Color PostScript3 Lexmark Mono PostScript2
> Debian GNU/Linux debian-amd64/pure64 sid XFree86 4.3.0
> Xorg X11R6.8.2 1.5 Mb DSL
>
> --
> To UNSUBSCRIBE, email to debian-amd64-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
--
Engañarse por amor es el engaño más terrible;
es una pérdida eterna para la que no hay compensación
ni en el tiempo ni en la eternidad.
Kierkegaard
Jaime Ochoa Malagón
Integrated Technology
Tel: (55) 52 54 26 10
Reply to: