Re: Problems with X11 on Ultra10
On Sun, 4 May 2014 08:25:16 +0100
Sad Clouds <cryintothebluesky@googlemail.com> wrote:
> On Sat, 03 May 2014 17:20:33 -0600
> Hayden Kroepfl <perlpowers@gmail.com> wrote:
>
> > On 03/05/14 03:39 PM, Sad Clouds wrote:
> > > Hello, I'm new to Debian and trying it out on Ultra10 which has
> > > Creator3D framebuffer.
> > >
> > > I installed Debian stable and seem to be having some issues with
> > > X11 or display manager. The system boots OK and I can see boot
> > > messages, but when it goes to start display manager the screen
> > > goes black and nothing happens. No windows, no mouse cursor,
> > > nothing.
> > >
> > > Any ideas?
> > >
> > >
> >
> > Might as well ask about the obvious right away, do you have your
> > monitor hooked up to the onboard video in the bottom left corner
> > (facing the back), or to the 13W3 video connector on the Creator3D?
> > What could be happening is X11 picked the wrong card by default and
> > is only showing it on the opposite connector. If you have a second
> > monitor try hooking one up to the 13W3 and one to the VGA connector.
> >
> > Hayden K.
>
> Hello, that was the first thing I tried however there is no VGA signal
> on machfb. I managed to get IP address assigned to this machine from
> DHCP server, logged in via ssh and looked at the logs. Looks like X
> server has problems configuring framebuffer device.
>
> So I generated xorg.conf manually with 'X -configure' and it thinks I
> have 3 cards:
>
> Identifier "Card0"
> Driver "mach64"
> BusID "PCI:1:2:0"
>
> Identifier "Card1"
> Driver "fbdev"
> BusID "PCI:1:2:0"
>
> Identifier "Card2"
> Driver "vesa"
> BusID "PCI:1:2:0"
>
>
> This looks wrong to me, one of them should be using sunffb driver. And
> why all three drivers refer to the same BusID?
>
> I tried copying this file to /etc/X11/xorg.conf and leaving only
>
> Identifier "Card1"
> Driver "sunffb"
> BusID "PCI:1:2:0"
>
> But still can't get X11 running
>
> Any ideas?
OK changed that to
BusID "SBUS:/SUNW,ffb@1e,0"
and X11 works now.
Reply to: