[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problems with installing Linux on a DEC1000A



Le mar 19/08/2003 à 14:31, Bourdin Pierre a écrit :
> Le dim 17/08/2003 à 21:04, George France a écrit :
> > Please use the wrapper CD, as per the message that was posted to the 
> > axp-list@redhat.com, that I have include below.
> > 
> > 
> > --George
> > 
> 
> 
> But any of the kernel I used (2.4.18 & 2.4.21 + RedHat 7.2 or wrapper
> CD) gives me the same error:
> <<
> 	DAC960 RAID Drivers Version 2.4.11 of 11 October 2001
> ...
> DAC960#0 Unable to map Controller Register Window for Controller at
> DAC960#0 PCI Bus 0 device 6 Function 0 I/O Adress Qx9480 PCI Address 0x0
> >>
> 
> The card is identified as a Mylex D040340-4-DEC wchich should be a
> DAC960PD-3 according to the Cross-Refernce List.
> It is although seen as "PCI Symbios Logic C810 Mylex DAC960 / Digital
> Controler SWXCR-Ex Raid" 
> The firmware is 2.73.
> 
> Do you have any idea why I have such error ?  
> 
> Is there raid config that are more suitable than others ? Raid 0 ? raid
> 1 ? Raid 0+1 ?
> With a better support ?
> 
> I don't know what to do ??
> Rebuild the raid config ? forget about this card ?
> 
> If you have a last idea before I resigned and break the raid config...
> 
> Thanks, Pierre.

I have also a D040349...
I've seen that ?

On Wednesday 26 February 2003 11:52 am, Jay Estabrook wrote:
>
> The following DAC960 models have been successfully used with the
> modified Linux driver and the updated custom firmware version 2.70:
>
> 	Part No		MYLEX name	DEC name
> 	-------		----------	--------
>
> 	D040347		DAC960PD-1	KZPSC 1 channel
> 	D040348		DAC960PD-2	KZPSC 2 channels
> 	D040349		DAC960PD-3	KZPSC 3 channels
>
> 	D040395		DAC960PU-1	KZPAC 1 channel
> 	D040396		DAC960PU-2	KZPAC 2 channels
> 	D040397		DAC960PU-3	KZPAC 3 channels
>
> Note that KZPSC is Fast/Wide, while KZPAC will run Ultra/Wide, IIRC.
>
> Good luck, and please let me know of any problems.
>
>  --Jay++

I've not tried but I believe it is only upgradable to firmware 2.70 ?
Is it better to use the D040340 or D040349 ? Both are referenced as
DAC960PD-3...

Pierre.
-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
Pierre BOURDIN 
I.M.E.R.I.R. 
Av. Pascot BP 2013 
66011 PERPIGNAN 
tél: 04 68 56 80 18 
fax: 04 68 55 03 86 
email: bourdin@imerir.com 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~



Reply to: