[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bad unaligned kernel access at fffffc0000431b54: fffffc0007ed3c32 22 31


Trying to get 2.6.0-test7 (Debian package, 2.6.0-test7-1) to compile on
my XLT-300 results in the following:

Linux version 2.6.0-test7-quordlepleen (root@quordlepleen) (gcc version 3.3.2 20031005 (Debian prerelease)) #1 Sun Oct 19 16:44:10 CEST 2003
Booting on Alcor variation Bret using machine vector XLT from MILO
Command line: bootdevice=sda5 bootfile=vmlinuz root=/dev/sda1 console=ttyS0 
memcluster 0, usage 2, start        0, end        1
memcluster 1, usage 0, start        1, end      196
memcluster 2, usage 2, start      196, end      198
memcluster 3, usage 0, start      198, end      256
memcluster 4, usage 2, start      256, end      328
memcluster 5, usage 0, start      328, end      384
memcluster 6, usage 2, start      384, end      765
memcluster 7, usage 0, start      765, end    16384
freeing pages 1:196
freeing pages 198:256
freeing pages 328:384
freeing pages 767:16384
reserving pages 1:2
pci: cia revision 1
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:4
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: bootdevice=sda5 bootfile=vmlinuz root=/dev/sda1 console=ttyS0 
PID hash table entries: 1024 (order 10: 16384 bytes)
Using epoch = 1980
Console: colour dummy device 80x25
Memory: 125824k/131072k available (1861k kernel code, 1408k reserved, 289k data, 352k init)
Calibrating delay loop... 593.48 BogoMIPS
Dentry cache hash table entries: 16384 (order: 4, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 3, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
EISA bus registered
pci: passed tb register update test
pci: passed sg loopback i/o read test
pci: passed tbia test
pci: passed pte write cache snoop test
pci: failed valid tag invalid pte reload test (mcheck; workaround available)
pci: passed pci machine check test
alcor_init_pci: Detected AS500 or XLT motherboard.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 256 Unix98 ptys configured
rtc: ARC console epoch (1980) detected
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
sym0: <810a> rev 0x11 at pci 0000:00:09.0 irq 28
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18b
Using anticipatory io scheduler
  Vendor: QUANTUM   Model: FIREBALL ST2.1S   Rev: 0F0J
  Type:   Direct-Access                      ANSI SCSI revision: 02
sym0:0:0: tagged command queuing enabled, command queue depth 16.
  Vendor: TOSHIBA   Model: CD-ROM XM-5401TA  Rev: 3605
  Type:   CD-ROM                             ANSI SCSI revision: 02
sym0:0: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8)
SCSI device sda: 4235629 512-byte hdwr sectors (2169 MB)
SCSI device sda: drive cache: write through
 sda:Bad unaligned kernel access at fffffc0000431b54: fffffc0007ed3c32 22 31
Kernel panic: Attempted to kill init!

Any ideas?
Someone else who managed to compile&boot a recent 2.6.0-test kernel?
Why can't I disable EISA?

Tot ziens,


Reply to: