Qlogic ISP 1020 hangs on boot
I am a experienced Linux user on the x86 platform, but now I am having my
first contact with the Alpha one.
I am trying to install Debian on an DS10, but the installation in hanging on
boot, just after it probes the Qlogic ISP 1020.
I have followed some threads regarding the Qlogic ISP on this lists, but
I suppose that it is not a cable or tape driver problem as I suceeded to flawlessly install
RedHat 7.2.
I think it is interesting to realize that the I/O base is reported as 0xb800 by debian
and as 0x8000 by RH.
I guess that perhaps using a kernel parameter I can force this. How could I boot from
debian install cd passing this parameter.
Here follows a screen copy of the debian boot:
scsi0 : QLogic ISP1020 SCSI on PCI bus 00 device 78 irq 39 I/O base 0xb800
Vendor: DEC Model: RZ2DD-KS (C) DEC Rev: 0306
Type: Direct-Access ANSI SCSI revision: 02
Detected SCSI disk sda at scsi0, channel 0, id 0, lun 0
<computer hangs>
and the RH dmesg:
Linux version 2.4.3-12 (root@george.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)) #1 Fri Jun 8 13:20:17 EDT 2001
Booting GENERIC on Tsunami variation Webbrick using machine vector Webbrick from SRM
Command line: root=/dev/sda4
memcluster 0, usage 1, start 0, end 256
memcluster 1, usage 0, start 256, end 32671
memcluster 2, usage 1, start 32671, end 32768
freeing pages 256:1024
freeing pages 1522:32671
reserving pages 1522:1523
On node 0 totalpages: 32671
zone(0): 32671 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda4
Using epoch = 1980
Console: colour VGA+ 80x25
Calibrating delay loop... 921.84 BogoMIPS
Memory: 248768k/261368k available (2164k kernel code, 8512k reserved, 888k data, 432k init)
Dentry-cache hash table entries: 32768 (order: 6, 524288 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 65536 bytes)
Page-cache hash table entries: 32768 (order: 6, 524288 bytes)
Inode-cache hash table entries: 16384 (order: 5, 262144 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
POSIX conformance testing by UNIFIX
got res[8000:80ff] for resource 0 of Q Logic ISP1020
got res[8400:84ff] for resource 1 of PLX Technology, Inc. 9060SD
got res[8800:887f] for resource 0 of Digital Equipment Corporation DECchip 21142/43
got res[8880:88ff] for resource 0 of Digital Equipment Corporation DECchip 21142/43 (#2)
got res[8c00:8c0f] for resource 0 of Acer Laboratories Inc. [ALi] M5229 IDE
got res[8c10:8c1f] for resource 2 of Acer Laboratories Inc. [ALi] M5229 IDE
got res[8c20:8c2f] for resource 4 of Acer Laboratories Inc. [ALi] M5229 IDE
got res[8c30:8c33] for resource 1 of Acer Laboratories Inc. [ALi] M5229 IDE
got res[8c34:8c37] for resource 3 of Acer Laboratories Inc. [ALi] M5229 IDE
got res[9000000:97fffff] for resource 1 of Texas Instruments TVP4020 [Permedia 2]
got res[9800000:9ffffff] for resource 2 of Texas Instruments TVP4020 [Permedia 2]
got res[a000000:a0fffff] for resource 3 of PLX Technology, Inc. 9060SD
got res[a100000:a1fffff] for resource 6 of PLX Technology, Inc. 9060SD
got res[a200000:a23ffff] for resource 6 of Digital Equipment Corporation DECchip 21142/43
got res[a240000:a27ffff] for resource 6 of Digital Equipment Corporation DECchip 21142/43 (#2)
got res[a280000:a29ffff] for resource 0 of Texas Instruments TVP4020 [Permedia 2]
got res[a2a0000:a2affff] for resource 6 of Texas Instruments TVP4020 [Permedia 2]
got res[a2b0000:a2bffff] for resource 6 of Q Logic ISP1020
got res[a2c0000:a2c3fff] for resource 2 of PLX Technology, Inc. 9060SD
got res[a2c4000:a2c4fff] for resource 1 of Q Logic ISP1020
got res[a2c5000:a2c53ff] for resource 1 of Digital Equipment Corporation DECchip 21142/43
got res[a2c6000:a2c63ff] for resource 1 of Digital Equipment Corporation DECchip 21142/43 (#2)
got res[a2c7000:a2c70ff] for resource 0 of PLX Technology, Inc. 9060SD
PCI enable device: (Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV])
cmd reg 0x7
PCI enable device: (Digital Equipment Corporation DECchip 21142/43)
cmd reg 0x7
PCI enable device: (Digital Equipment Corporation DECchip 21142/43 (#2))
cmd reg 0x7
PCI enable device: (Acer Laboratories Inc. [ALi] M5229 IDE)
cmd reg 0x5
PCI enable device: (Texas Instruments TVP4020 [Permedia 2])
cmd reg 0x7
PCI enable device: (Q Logic ISP1020)
cmd reg 0x7
PCI enable device: (PLX Technology, Inc. 9060SD)
cmd reg 0x7
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
pty: 2048 Unix98 ptys configured
block: queued sectors max/low 164874kB/54958kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 68
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
ALI15X3: simplex device: DMA disabled
ide0: ALI15X3 Bus-Master DMA disabled (BIOS)
ALI15X3: simplex device: DMA disabled
ide1: ALI15X3 Bus-Master DMA disabled (BIOS)
hda: COMPAQ CDR-8435, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Floppy drive(s): fd0 is 2.88M
FDC 0 is a post-1991 82077
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
SCSI subsystem driver Revision: 1.00
qlogicisp : new isp1020 revision ID (5)
scsi0 : QLogic ISP1020 SCSI on PCI bus 00 device 78 irq 39 I/O base 0x8000
Vendor: DEC Model: RZ2DD-KS (C) DEC Rev: 0306
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: TLZ10 (C) DEC Rev: 04a8
Type: Sequential-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
Partition check:
sda: sda1 sda2 sda3 sda4
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 432k freed
Adding Swap: 524272k swap-space (priority -1)
st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16.
Attached scsi tape st0 at scsi0, channel 0, id 6, lun 0
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x3bc: FIFO is 16 bytes
0x3bc: writeIntrThreshold is 1
0x3bc: readIntrThreshold is 1
0x3bc: PWord is 8 bits
0x3bc: Interrupts are ISA-Pulses
0x3bc: ECP port cfgA=0x10 cfgB=0x4b
0x3bc: ECP settings irq=7 dma=3
parport0: PC-style at 0x3bc (0x7bc) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (1020 buckets, 8160 max)
eth0: DC21143 at 0x8800 (PCI bus 0, device 9), h/w address 08:00:2b:86:bf:22,
and requires IRQ29 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
eth1: DC21143 at 0x8880 (PCI bus 0, device 11), h/w address 08:00:2b:86:b8:c3,
and requires IRQ30 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
eth0: media is 100Mb/s.
eth0: media is 100Mb/s.
Best Regards,
Leonardo Alcantara
--
Leonardo Alcantara
Analista de Projetos de Redes
Reply to: