X Configuration
Hello to all who may be able to help --
I have a DEC Alphastation AS200 with a standard Number 9 Video card. I
have a monitor that has a horizontal refresh range of 31.5KHz-68.7KHz, and
a Vertical of 70-85Hz. For the life of me, I cannot get XWindows up and
running. Here is a dump of an attempt to start X "Raw." If anybody can
help me pinpoint the root of my problem, I would greatly appreciate it.
Furthermore, since I have just subscribed to this listserv, please copy me
directly at the.ozz@home.com. TIA,
Bewildered
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14pre11 alpha [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100,
mgag400, s3_virge
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: MouseSystems, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "My Video Card"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:un
scaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/mis
c/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) SVGA: PCI: S3 Trio32/64 rev 0, Memory @ 0x04800000
*** None of the configured devices were detected.***
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
Reply to: