[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: "BUG: soft lockup" on A1200; was: Re: Updated installation images for Debian Ports 2019-04-20



Hi Michael,

I did try to boot with "initcall_debug ignore_loglevel", as you suggested:

------------------------

[    0.000000] Kernel command line: loglevel=7 initcall_debug
init=/bin/bash root=/dev/ram console=tty0 console=ttyS0,9600n8
video=amifb:pal-lace modprobe.blacklist=amiflop debug ignore_loglevel
BOOT_IMAGE=kernels/vmlinux-4.19.0-5-m68k

------------------------

Here is the end of dmesg (full log in attachment) when kernel stalls,
just as before:

------------------------

[  122.430000] This architecture does not have kernel memory protection.
[  122.440000] Run /init as init process
[  126.690000] calling  ide_init+0x0/0x7c [ide_core] @ 43
[  126.700000] Uniform Multi-Platform E-IDE driver
[  126.710000] initcall ide_init+0x0/0x7c [ide_core] returned 0 after
7988 usecs
[  126.980000] calling  amiga_gayle_ide_driver_init+0x0/0x1c [gayle] @ 43
[  126.990000] ide: Gayle IDE controller (A1200 style)
[  127.000000] Probing IDE interface ide0...
[  127.390000] hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
[  127.540000] hda: SAMSUNG MP0402H, ATA DISK drive
[  127.610000] Z2RAM: using 0K Zorro II RAM and 512K Chip RAM (Total 512K)
[  127.980000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
[  128.200000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
[  148.570000] watchdog: BUG: soft lockup - CPU#0 stuck for 22s!
[systemd-udevd:43]
[  148.570000] Modules linked in: gayle(+) ide_core
[  148.570000] Format 00  Vector: 0078  PC: 00050b58  Status: 2200   
Not tainted
[  148.570000] ORIG_D0: ffffffff  D0: 00000064  A2: 0151ef90  A1: 80bfe001
[  148.570000] A0: 003f0c12  D5: 00000000  D4: 0000000a
[  148.570000] D3: 00400140  D2: 00000001  D1: 8e6f286a
[  759.250000] amikbd: Ctrl-Amiga-Amiga reset warning!!
[  759.260000] amikbd: Ctrl-Amiga-Amiga reset warning!!
------------------------

If you see a difference in detection of IDE devices, it's due to fact
that I disconnected all but the master hard disk.

With kind regards,

Szymon

On 6/11/19 3:24 AM, Michael Schmitz wrote:
> Szymon,
>
> please try adding 'initcall_debug' to the bootstrap options.
>
> Cheers,
>
>     Michael
>
>
> On 8/06/19 6:50 AM, Szymon Bieganski wrote:
>> Hi, again,
>> On 6/7/19 1:27 AM, John Paul Adrian Glaubitz wrote:
>>> Hi!
>>>
>>> On 6/6/19 11:22 PM, Szymon Bieganski wrote:
>>>> stock 1D4 Amiga 1200 with Apollo 040 CPU card, recent Elbox FastATA
>>>> IDE
>>>> controller with 40G IDE HDD and PCMCIA network card. All components
>>>> causes no problems with other OS'es and with neither KS 3.0, 3.1 nor
>>>> 3.1.4 (might be important during boot-off of partition beyond 4G
>>>> boundary).
>>> You did not mention how much RAM you have which is rather important
>>> to know. And how fast is the 040 clocked?
>> Apollo 1240 with full 68040 clocked at 40MHz with (continuous block of)
>> 64MB of RAM.
>>> Can you please post all relevant information here so that we don't rely
>>> on external sites?
>> Below a full dmesg while booting 4.19.0-5, which I extracted from
>> installation ISO's. Amiboot was started with -r pointing to the
>> cdrom/initrd.gz
>>
>> -----------------------------
>>
>> [  116.720000] This architecture does not have kernel memory protection.
>> [  116.730000] Run /init as init process
>> [  120.980000] Uniform Multi-Platform E-IDE driver
>> [  121.190000] ide: Gayle IDE controller (A1200 style)
>> [  121.500000] hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
>> [  121.650000] hda: SAMSUNG MP0402H, ATA DISK drive
>> [  121.850000] Z2RAM: using 0K Zorro II RAM and 512K Chip RAM (Total
>> 512K)
>> [  122.080000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
>> [  122.300000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
>> [  144.390000] watchdog: BUG: soft lockup - CPU#0 stuck for 22s!
>> [systemd-udevd:45]
>> [  144.390000] Modules linked in: gayle(+) ide_core
>> [  144.390000] Format 00  Vector: 0078  PC: 00050b6c  Status: 2204   
>> Not tainted
>> [  144.390000] ORIG_D0: ffffffff  D0: 00000001  A2: 015193b0  A1:
>> 80bfe001
>> [  144.390000] A0: 003f0c12  D5: 00000000  D4: 002c66d2
>> [  144.390000] D3: 00000002  D2: 00000000  D1: 8ed2ba3d
>> [ 1337.790000] amikbd: Ctrl-Amiga-Amiga reset warning!!
>> [ 1337.800000] amikbd: Ctrl-Amiga-Amiga reset warning!!
>> -----------------------------
>>
>>> Try passing "init=/bin/bash" on the kernel command line.
>> See above - no difference.
>>>>   ABCDGHIJK
>>>>   Linux version 4.19.37-amiga (root@nb) (gcc version 8.3.0 (Debian
>>>> 8.3.0-7)) #1 Sun May 26 21:20:29 UTC 2019
>>> That's not a Debian kernel you are booting here. Where does this kernel
>>> come from?
>> This particular was actually build in debootstrap environment following
>> the instruction found in https://www.subsecret.dk/wiki/Linux_on_Amiga
>>
>> I hope I cleared any doubts.
>>
>> Szymon
>>
>>
>
ABCDGHIJK
[    0.000000] Linux version 4.19.0-5-m68k (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 Debian 4.19.37-1 (2019-05-05)
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO 
[    0.000000] On node 0 totalpages: 16384
[    0.000000]   DMA zone: 160 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 16384 pages, LIFO batch:3
[    0.000000] initrd: 037566b5 - 04000000
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16224
[    0.000000] Kernel command line: loglevel=7 initcall_debug init=/bin/bash root=/dev/ram console=tty0 console=ttyS0,9600n8 video=amifb:pal-lace modprobe.blacklist=amiflop debug ignore_loglevel BOOT_IMAGE=kernels/vmlinux-4.19.0-5-m68k
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Sorting __ex_table...
[    0.000000] Memory: 51408K/65536K available (2870K kernel code, 399K rwdata, 1004K rodata, 156K init, 202K bss, 14128K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x498 with crng_init=0
[    0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[    0.000000] NR_IRQS: 200
[    0.000000] Console: colour dummy device 80x25
[    0.010000] console [tty0] enabled
[    0.220000] console [ttyS0] enabled
[    0.230000] Calibrating delay loop... 26.16 BogoMIPS (lpj=130816)
[    0.350000] pid_max: default: 32768 minimum: 301
[    0.370000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.440000] calling  spawn_ksoftirqd+0x0/0x46 @ 1
[    0.460000] initcall spawn_ksoftirqd+0x0/0x46 returned 0 after 2302 usecs
[    0.470000] calling  dynamic_debug_init+0x0/0x20e @ 1
[    0.490000] initcall dynamic_debug_init+0x0/0x20e returned 0 after 11921 usecs
[    0.500000] calling  rand_initialize+0x0/0xa4 @ 1
[    0.520000] initcall rand_initialize+0x0/0xa4 returned 0 after 7778 usecs
[    0.530000] calling  initialize_ptr_random+0x0/0xae @ 1
[    0.540000] initcall initialize_ptr_random+0x0/0xae returned 0 after 34 usecs
[    0.560000] devtmpfs: initialized
[    0.590000] calling  ipc_ns_init+0x0/0x12 @ 1
[    0.600000] initcall ipc_ns_init+0x0/0x12 returned 0 after 119 usecs
[    0.620000] calling  init_mmap_min_addr+0x0/0xe @ 1
[    0.630000] initcall init_mmap_min_addr+0x0/0xe returned 0 after 19 usecs
[    0.640000] calling  net_ns_init+0x0/0xf6 @ 1
[    0.650000] initcall net_ns_init+0x0/0xf6 returned 0 after 2886 usecs
[    0.660000] calling  wq_sysfs_init+0x0/0x2a @ 1
[    0.670000] initcall wq_sysfs_init+0x0/0x2a returned 0 after 1551 usecs
[    0.680000] calling  ksysfs_init+0x0/0x8e @ 1
[    0.690000] initcall ksysfs_init+0x0/0x8e returned 0 after 581 usecs
[    0.700000] calling  rcu_set_runtime_mode+0x0/0xc @ 1
[    0.710000] initcall rcu_set_runtime_mode+0x0/0xc returned 0 after 23 usecs
[    0.720000] calling  init_jiffies_clocksource+0x0/0x18 @ 1
[    0.730000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.740000] initcall init_jiffies_clocksource+0x0/0x18 returned 0 after 17916 usecs
[    0.750000] calling  futex_init+0x0/0x6e @ 1
[    0.760000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.770000] initcall futex_init+0x0/0x6e returned 0 after 12914 usecs
[    0.780000] calling  cgroup_wq_init+0x0/0x3e @ 1
[    0.790000] initcall cgroup_wq_init+0x0/0x3e returned 0 after 310 usecs
[    0.800000] calling  cgroup1_wq_init+0x0/0x3e @ 1
[    0.810000] initcall cgroup1_wq_init+0x0/0x3e returned 0 after 264 usecs
[    0.820000] calling  init_per_zone_wmark_min+0x0/0x6e @ 1
[    0.830000] initcall init_per_zone_wmark_min+0x0/0x6e returned 0 after 105 usecs
[    0.840000] calling  init_zero_pfn+0x0/0x8e @ 1
[    0.860000] initcall init_zero_pfn+0x0/0x8e returned 0 after 29 usecs
[    0.870000] calling  fsnotify_init+0x0/0x48 @ 1
[    0.880000] initcall fsnotify_init+0x0/0x48 returned 0 after 2107 usecs
[    0.890000] calling  filelock_init+0x0/0x50 @ 1
[    0.900000] initcall filelock_init+0x0/0x50 returned 0 after 1369 usecs
[    0.910000] calling  init_script_binfmt+0x0/0x14 @ 1
[    0.920000] initcall init_script_binfmt+0x0/0x14 returned 0 after 30 usecs
[    0.930000] calling  init_elf_binfmt+0x0/0x14 @ 1
[    0.940000] initcall init_elf_binfmt+0x0/0x14 returned 0 after 32 usecs
[    0.950000] calling  debugfs_init+0x0/0x54 @ 1
[    0.960000] initcall debugfs_init+0x0/0x54 returned 0 after 172 usecs
[    0.970000] calling  prandom_init+0x0/0xce @ 1
[    0.980000] initcall prandom_init+0x0/0xce returned 0 after 55 usecs
[    0.990000] calling  component_debug_init+0x0/0x1a @ 1
[    1.000000] initcall component_debug_init+0x0/0x1a returned 0 after 1136 usecs
[    1.010000] calling  sock_init+0x0/0xa2 @ 1
[    1.020000] initcall sock_init+0x0/0xa2 returned 0 after 3414 usecs
[    1.040000] calling  net_inuse_init+0x0/0x20 @ 1
[    1.050000] initcall net_inuse_init+0x0/0x20 returned 0 after 295 usecs
[    1.060000] calling  net_defaults_init+0x0/0x20 @ 1
[    1.070000] initcall net_defaults_init+0x0/0x20 returned 0 after 54 usecs
[    1.080000] calling  init_default_flow_dissectors+0x0/0x48 @ 1
[    1.090000] initcall init_default_flow_dissectors+0x0/0x48 returned 0 after 50 usecs
[    1.100000] calling  netpoll_init+0x0/0x18 @ 1
[    1.110000] initcall netpoll_init+0x0/0x18 returned 0 after 23 usecs
[    1.120000] calling  netlink_proto_init+0x0/0x126 @ 1
[    1.140000] NET: Registered protocol family 16
[    1.150000] initcall netlink_proto_init+0x0/0x126 returned 0 after 16937 usecs
[    1.160000] calling  bdi_class_init+0x0/0x4a @ 1
[    1.170000] initcall bdi_class_init+0x0/0x4a returned 0 after 759 usecs
[    1.180000] calling  mm_sysfs_init+0x0/0x24 @ 1
[    1.190000] initcall mm_sysfs_init+0x0/0x24 returned 0 after 206 usecs
[    1.200000] calling  tty_class_init+0x0/0x34 @ 1
[    1.210000] initcall tty_class_init+0x0/0x34 returned 0 after 538 usecs
[    1.220000] calling  vtconsole_class_init+0x0/0xdc @ 1
[    1.230000] initcall vtconsole_class_init+0x0/0xdc returned 0 after 1774 usecs
[    1.240000] calling  serdev_init+0x0/0x1c @ 1
[    1.250000] initcall serdev_init+0x0/0x1c returned 0 after 1313 usecs
[    1.260000] calling  isa_bus_init+0x0/0x3e @ 1
[    1.270000] initcall isa_bus_init+0x0/0x3e returned 0 after 1321 usecs
[    1.280000] random: fast init done
[    1.290000] calling  nubus_bus_register+0x0/0x10 @ 1
[    1.300000] initcall nubus_bus_register+0x0/0x10 returned 0 after 1061 usecs
[    1.310000] calling  zorro_driver_init+0x0/0x10 @ 1
[    1.330000] initcall zorro_driver_init+0x0/0x10 returned 0 after 1720 usecs
[    1.340000] calling  kobject_uevent_init+0x0/0x10 @ 1
[    1.350000] initcall kobject_uevent_init+0x0/0x10 returned 0 after 309 usecs
[    1.360000] calling  q40_add_kbd_device+0x0/0x52 @ 1
[    1.370000] initcall q40_add_kbd_device+0x0/0x52 returned -19 after 25 usecs
[    1.380000] calling  amiga_init_devices+0x0/0x414 @ 1
[    1.410000] initcall amiga_init_devices+0x0/0x414 returned 0 after 11748 usecs
[    1.420000] calling  atari_platform_init+0x0/0x12a @ 1
[    1.430000] initcall atari_platform_init+0x0/0x12a returned -19 after 19 usecs
[    1.450000] calling  atari_stram_map_pages+0x0/0xd4 @ 1
[    1.470000] initcall atari_stram_map_pages+0x0/0xd4 returned 0 after 1069 usecs
[    1.480000] calling  mac_platform_init+0x0/0x2ec @ 1
[    1.490000] initcall mac_platform_init+0x0/0x2ec returned -19 after 16 usecs
[    1.500000] calling  kcmp_cookies_init+0x0/0x28 @ 1
[    1.510000] initcall kcmp_cookies_init+0x0/0x28 returned 0 after 221 usecs
[    1.520000] calling  via_pmu_start+0x0/0xc6 @ 1
[    1.530000] initcall via_pmu_start+0x0/0xc6 returned -19 after 20 usecs
[    1.550000] calling  amiga_init_bus+0x0/0x7a @ 1
[    1.560000] initcall amiga_init_bus+0x0/0x7a returned 0 after 1436 usecs
[    1.570000] calling  uid_cache_init+0x0/0x82 @ 1
[    1.580000] initcall uid_cache_init+0x0/0x82 returned 0 after 634 usecs
[    1.590000] calling  param_sysfs_init+0x0/0x1d0 @ 1
[    1.670000] initcall param_sysfs_init+0x0/0x1d0 returned 0 after 71518 usecs
[    1.680000] calling  user_namespace_sysctl_init+0x0/0x4c @ 1
[    1.700000] initcall user_namespace_sysctl_init+0x0/0x4c returned 0 after 1200 usecs
[    1.710000] calling  proc_schedstat_init+0x0/0x22 @ 1
[    1.720000] initcall proc_schedstat_init+0x0/0x22 returned 0 after 112 usecs
[    1.730000] calling  pm_sysrq_init+0x0/0x16 @ 1
[    1.740000] initcall pm_sysrq_init+0x0/0x16 returned 0 after 30 usecs
[    1.750000] calling  create_proc_profile+0x0/0x46 @ 1
[    1.760000] initcall create_proc_profile+0x0/0x46 returned 0 after 23 usecs
[    1.770000] calling  crash_save_vmcoreinfo_init+0x0/0x492 @ 1
[    1.780000] initcall crash_save_vmcoreinfo_init+0x0/0x492 returned 0 after 3891 usecs
[    1.790000] calling  cgroup_sysfs_init+0x0/0x16 @ 1
[    1.800000] initcall cgroup_sysfs_init+0x0/0x16 returned 0 after 314 usecs
[    1.810000] calling  cgroup_namespaces_init+0x0/0x4 @ 1
[    1.820000] initcall cgroup_namespaces_init+0x0/0x4 returned 0 after 18 usecs
[    1.830000] calling  user_namespaces_init+0x0/0x2a @ 1
[    1.840000] initcall user_namespaces_init+0x0/0x2a returned 0 after 467 usecs
[    1.850000] calling  hung_task_init+0x0/0x4e @ 1
[    1.870000] initcall hung_task_init+0x0/0x4e returned 0 after 2382 usecs
[    1.880000] calling  dev_map_init+0x0/0x12 @ 1
[    1.890000] initcall dev_map_init+0x0/0x12 returned 0 after 60 usecs
[    1.900000] calling  oom_init+0x0/0x30 @ 1
[    1.910000] initcall oom_init+0x0/0x30 returned 0 after 1653 usecs
[    1.920000] calling  cgwb_init+0x0/0x2a @ 1
[    1.930000] initcall cgwb_init+0x0/0x2a returned 0 after 331 usecs
[    1.940000] calling  default_bdi_init+0x0/0x96 @ 1
[    1.950000] initcall default_bdi_init+0x0/0x96 returned 0 after 3925 usecs
[    1.960000] calling  percpu_enable_async+0x0/0xc @ 1
[    1.970000] initcall percpu_enable_async+0x0/0xc returned 0 after 23 usecs
[    1.980000] calling  init_reserve_notifier+0x0/0x4 @ 1
[    1.990000] initcall init_reserve_notifier+0x0/0x4 returned 0 after 19 usecs
[    2.000000] calling  init_admin_reserve+0x0/0x22 @ 1
[    2.020000] initcall init_admin_reserve+0x0/0x22 returned 0 after 26 usecs
[    2.030000] calling  init_user_reserve+0x0/0x20 @ 1
[    2.040000] initcall init_user_reserve+0x0/0x20 returned 0 after 25 usecs
[    2.050000] calling  swap_init_sysfs+0x0/0x60 @ 1
[    2.060000] initcall swap_init_sysfs+0x0/0x60 returned 0 after 279 usecs
[    2.080000] calling  swapfile_init+0x0/0x128 @ 1
[    2.090000] initcall swapfile_init+0x0/0x128 returned 0 after 46 usecs
[    2.100000] calling  mem_cgroup_swap_init+0x0/0x70 @ 1
[    2.110000] initcall mem_cgroup_swap_init+0x0/0x70 returned 0 after 19 usecs
[    2.120000] calling  mem_cgroup_init+0x0/0x192 @ 1
[    2.130000] initcall mem_cgroup_init+0x0/0x192 returned 0 after 418 usecs
[    2.140000] calling  crypto_wq_init+0x0/0x2c @ 1
[    2.160000] initcall crypto_wq_init+0x0/0x2c returned 0 after 2551 usecs
[    2.170000] calling  cryptomgr_init+0x0/0x10 @ 1
[    2.180000] initcall cryptomgr_init+0x0/0x10 returned 0 after 44 usecs
[    2.190000] calling  init_bio+0x0/0xcc @ 1
[    2.200000] initcall init_bio+0x0/0xcc returned 0 after 5521 usecs
[    2.210000] calling  blk_settings_init+0x0/0x20 @ 1
[    2.220000] initcall blk_settings_init+0x0/0x20 returned 0 after 19 usecs
[    2.240000] calling  blk_ioc_init+0x0/0x28 @ 1
[    2.250000] initcall blk_ioc_init+0x0/0x28 returned 0 after 931 usecs
[    2.260000] calling  blk_softirq_init+0x0/0x42 @ 1
[    2.270000] initcall blk_softirq_init+0x0/0x42 returned 0 after 38 usecs
[    2.280000] calling  blk_mq_init+0x0/0x26 @ 1
[    2.290000] initcall blk_mq_init+0x0/0x26 returned 0 after 33 usecs
[    2.300000] calling  genhd_device_init+0x0/0x70 @ 1
[    2.320000] initcall genhd_device_init+0x0/0x70 returned 0 after 4306 usecs
[    2.330000] calling  fbmem_init+0x0/0xd4 @ 1
[    2.340000] initcall fbmem_init+0x0/0xd4 returned 0 after 2223 usecs
[    2.350000] calling  misc_init+0x0/0xc0 @ 1
[    2.360000] initcall misc_init+0x0/0xc0 returned 0 after 722 usecs
[    2.370000] calling  dax_fs_init+0x0/0xba @ 1
[    2.380000] initcall dax_fs_init+0x0/0xba returned 0 after 1818 usecs
[    2.390000] calling  nubus_init+0x0/0x774 @ 1
[    2.400000] initcall nubus_init+0x0/0x774 returned 0 after 24 usecs
[    2.410000] calling  init_scsi+0x0/0x78 @ 1
[    2.430000] SCSI subsystem initialized
[    2.440000] initcall init_scsi+0x0/0x78 returned 0 after 12691 usecs
[    2.450000] calling  serio_init+0x0/0x2a @ 1
[    2.470000] initcall serio_init+0x0/0x2a returned 0 after 1099 usecs
[    2.480000] calling  input_init+0x0/0xf8 @ 1
[    2.500000] initcall input_init+0x0/0xf8 returned 0 after 1039 usecs
[    2.510000] calling  rtc_init+0x0/0x48 @ 1
[    2.520000] initcall rtc_init+0x0/0x48 returned 0 after 587 usecs
[    2.530000] calling  power_supply_class_init+0x0/0x42 @ 1
[    2.540000] initcall power_supply_class_init+0x0/0x42 returned 0 after 588 usecs
[    2.550000] calling  leds_init+0x0/0x3c @ 1
[    2.560000] initcall leds_init+0x0/0x3c returned 0 after 567 usecs
[    2.570000] calling  nvmem_init+0x0/0x10 @ 1
[    2.580000] initcall nvmem_init+0x0/0x10 returned 0 after 1090 usecs
[    2.590000] calling  proto_init+0x0/0x10 @ 1
[    2.600000] initcall proto_init+0x0/0x10 returned 0 after 135 usecs
[    2.610000] calling  net_dev_init+0x0/0x1ca @ 1
[    2.630000] initcall net_dev_init+0x0/0x1ca returned 0 after 9937 usecs
[    2.640000] calling  neigh_init+0x0/0x74 @ 1
[    2.650000] initcall neigh_init+0x0/0x74 returned 0 after 115 usecs
[    2.660000] calling  fib_notifier_init+0x0/0x10 @ 1
[    2.670000] initcall fib_notifier_init+0x0/0x10 returned 0 after 60 usecs
[    2.680000] calling  fib_rules_init+0x0/0xa6 @ 1
[    2.700000] initcall fib_rules_init+0x0/0xa6 returned 0 after 145 usecs
[    2.710000] calling  init_cgroup_netprio+0x0/0x12 @ 1
[    2.730000] initcall init_cgroup_netprio+0x0/0x12 returned 0 after 64 usecs
[    2.740000] calling  bpf_lwt_init+0x0/0x14 @ 1
[    2.750000] initcall bpf_lwt_init+0x0/0x14 returned 0 after 20 usecs
[    2.760000] calling  pktsched_init+0x0/0xf0 @ 1
[    2.770000] initcall pktsched_init+0x0/0xf0 returned 0 after 499 usecs
[    2.780000] calling  tc_filter_init+0x0/0xe4 @ 1
[    2.790000] initcall tc_filter_init+0x0/0xe4 returned 0 after 522 usecs
[    2.800000] calling  tc_action_init+0x0/0x6c @ 1
[    2.810000] initcall tc_action_init+0x0/0x6c returned 0 after 237 usecs
[    2.820000] calling  genl_init+0x0/0x34 @ 1
[    2.830000] initcall genl_init+0x0/0x34 returned 0 after 391 usecs
[    2.840000] calling  clocksource_done_booting+0x0/0x2a @ 1
[    2.850000] initcall clocksource_done_booting+0x0/0x2a returned 0 after 29 usecs
[    2.860000] calling  bpf_init+0x0/0x4a @ 1
[    2.880000] initcall bpf_init+0x0/0x4a returned 0 after 175 usecs
[    2.890000] calling  init_pipe_fs+0x0/0x46 @ 1
[    2.900000] initcall init_pipe_fs+0x0/0x46 returned 0 after 893 usecs
[    2.910000] calling  cgroup_writeback_init+0x0/0x28 @ 1
[    2.920000] initcall cgroup_writeback_init+0x0/0x28 returned 0 after 351 usecs
[    2.930000] calling  inotify_user_setup+0x0/0x48 @ 1
[    2.940000] initcall inotify_user_setup+0x0/0x48 returned 0 after 917 usecs
[    2.950000] calling  eventpoll_init+0x0/0x92 @ 1
[    2.960000] initcall eventpoll_init+0x0/0x92 returned 0 after 1779 usecs
[    2.970000] calling  anon_inode_init+0x0/0x50 @ 1
[    2.980000] initcall anon_inode_init+0x0/0x50 returned 0 after 897 usecs
[    2.990000] calling  init_dax_wait_table+0x0/0x3a @ 1
[    3.000000] initcall init_dax_wait_table+0x0/0x3a returned 0 after 2633 usecs
[    3.010000] calling  proc_locks_init+0x0/0x24 @ 1
[    3.020000] initcall proc_locks_init+0x0/0x24 returned 0 after 106 usecs
[    3.030000] calling  dquot_init+0x0/0xe0 @ 1
[    3.040000] VFS: Disk quotas dquot_6.6.0
[    3.050000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.060000] initcall dquot_init+0x0/0xe0 returned 0 after 21009 usecs
[    3.070000] calling  quota_init+0x0/0x24 @ 1
[    3.080000] initcall quota_init+0x0/0x24 returned 0 after 559 usecs
[    3.090000] calling  proc_cmdline_init+0x0/0x20 @ 1
[    3.100000] initcall proc_cmdline_init+0x0/0x20 returned 0 after 116 usecs
[    3.110000] calling  proc_consoles_init+0x0/0x22 @ 1
[    3.120000] initcall proc_consoles_init+0x0/0x22 returned 0 after 103 usecs
[    3.130000] calling  proc_cpuinfo_init+0x0/0x1e @ 1
[    3.140000] initcall proc_cpuinfo_init+0x0/0x1e returned 0 after 110 usecs
[    3.150000] calling  proc_devices_init+0x0/0x22 @ 1
[    3.170000] initcall proc_devices_init+0x0/0x22 returned 0 after 111 usecs
[    3.180000] calling  proc_interrupts_init+0x0/0x22 @ 1
[    3.190000] initcall proc_interrupts_init+0x0/0x22 returned 0 after 107 usecs
[    3.200000] calling  proc_loadavg_init+0x0/0x20 @ 1
[    3.210000] initcall proc_loadavg_init+0x0/0x20 returned 0 after 102 usecs
[    3.220000] calling  proc_meminfo_init+0x0/0x20 @ 1
[    3.240000] initcall proc_meminfo_init+0x0/0x20 returned 0 after 110 usecs
[    3.250000] calling  proc_stat_init+0x0/0x1e @ 1
[    3.260000] initcall proc_stat_init+0x0/0x1e returned 0 after 104 usecs
[    3.270000] calling  proc_uptime_init+0x0/0x20 @ 1
[    3.280000] initcall proc_uptime_init+0x0/0x20 returned 0 after 103 usecs
[    3.290000] calling  proc_version_init+0x0/0x20 @ 1
[    3.300000] initcall proc_version_init+0x0/0x20 returned 0 after 110 usecs
[    3.310000] calling  proc_softirqs_init+0x0/0x20 @ 1
[    3.320000] initcall proc_softirqs_init+0x0/0x20 returned 0 after 103 usecs
[    3.330000] calling  proc_kcore_init+0x0/0x70 @ 1
[    3.340000] initcall proc_kcore_init+0x0/0x70 returned 0 after 152 usecs
[    3.350000] calling  proc_kmsg_init+0x0/0x20 @ 1
[    3.360000] initcall proc_kmsg_init+0x0/0x20 returned 0 after 107 usecs
[    3.370000] calling  proc_page_init+0x0/0x52 @ 1
[    3.380000] initcall proc_page_init+0x0/0x52 returned 0 after 217 usecs
[    3.390000] calling  init_ramfs_fs+0x0/0x22 @ 1
[    3.400000] initcall init_ramfs_fs+0x0/0x22 returned 0 after 23 usecs
[    3.410000] calling  blk_scsi_ioctl_init+0x0/0x256 @ 1
[    3.420000] initcall blk_scsi_ioctl_init+0x0/0x256 returned 0 after 41 usecs
[    3.430000] calling  dynamic_debug_init_debugfs+0x0/0x56 @ 1
[    3.440000] initcall dynamic_debug_init_debugfs+0x0/0x56 returned 0 after 419 usecs
[    3.450000] calling  chr_dev_init+0x0/0xb0 @ 1
[    3.660000] initcall chr_dev_init+0x0/0xb0 returned 0 after 187436 usecs
[    3.670000] calling  firmware_class_init+0x0/0x24 @ 1
[    3.680000] initcall firmware_class_init+0x0/0x24 returned 0 after 43 usecs
[    3.690000] calling  sysctl_core_init+0x0/0x2a @ 1
[    3.700000] initcall sysctl_core_init+0x0/0x2a returned 0 after 1215 usecs
[    3.710000] calling  eth_offload_init+0x0/0x12 @ 1
[    3.720000] initcall eth_offload_init+0x0/0x12 returned 0 after 29 usecs
[    3.730000] calling  inet_init+0x0/0x274 @ 1
[    3.740000] NET: Registered protocol family 2
[    3.770000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[    3.780000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    3.800000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    3.810000] TCP: Hash tables configured (established 1024 bind 1024)
[    3.820000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    3.830000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    3.840000] initcall inet_init+0x0/0x274 returned 0 after 96438 usecs
[    3.850000] calling  ipv4_offload_init+0x0/0x78 @ 1
[    3.860000] initcall ipv4_offload_init+0x0/0x78 returned 0 after 41 usecs
[    3.870000] calling  af_unix_init+0x0/0x4c @ 1
[    3.880000] NET: Registered protocol family 1
[    3.890000] initcall af_unix_init+0x0/0x4c returned 0 after 12774 usecs
[    3.900000] calling  ipv6_offload_init+0x0/0x82 @ 1
[    3.910000] initcall ipv6_offload_init+0x0/0x82 returned 0 after 41 usecs
[    3.920000] calling  xsk_init+0x0/0x40 @ 1
[    3.930000] NET: Registered protocol family 44
[    3.940000] initcall xsk_init+0x0/0x40 returned 0 after 3037 usecs
[    3.950000] calling  populate_rootfs+0x0/0xa4 @ 1
[    3.960000] Unpacking initramfs...
[   29.660000] Freeing initrd memory: 8868K
[   29.670000] initcall populate_rootfs+0x0/0xa4 returned 0 after 25113010 usecs
[   29.680000] calling  proc_hardware_init+0x0/0x20 @ 1
[   29.690000] initcall proc_hardware_init+0x0/0x20 returned 0 after 114 usecs
[   29.700000] calling  rtc_init+0x0/0x5e @ 1
[   29.710000] initcall rtc_init+0x0/0x5e returned -19 after 19 usecs
[   29.720000] calling  rtc_MK48T08_init+0x0/0x30 @ 1
[   29.730000] initcall rtc_MK48T08_init+0x0/0x30 returned -19 after 25 usecs
[   29.740000] calling  rtc_DP8570A_init+0x0/0x30 @ 1
[   29.750000] initcall rtc_DP8570A_init+0x0/0x30 returned -19 after 23 usecs
[   29.760000] calling  nfhd_init+0x0/0x226 @ 1
[   29.770000] initcall nfhd_init+0x0/0x226 returned -19 after 65 usecs
[   29.780000] calling  nfcon_init+0x0/0x114 @ 1
[   29.790000] initcall nfcon_init+0x0/0x114 returned -19 after 64 usecs
[   29.810000] calling  nfeth_init+0x0/0x194 @ 1
[   29.820000] initcall nfeth_init+0x0/0x194 returned -19 after 61 usecs
[   29.830000] calling  proc_execdomains_init+0x0/0x20 @ 1
[   29.850000] initcall proc_execdomains_init+0x0/0x20 returned 0 after 109 usecs
[   29.860000] calling  register_warn_debugfs+0x0/0x22 @ 1
[   29.880000] initcall register_warn_debugfs+0x0/0x22 returned 0 after 262 usecs
[   29.900000] calling  ioresources_init+0x0/0x46 @ 1
[   29.910000] initcall ioresources_init+0x0/0x46 returned 0 after 167 usecs
[   29.920000] calling  timekeeping_init_ops+0x0/0x12 @ 1
[   29.930000] initcall timekeeping_init_ops+0x0/0x12 returned 0 after 35 usecs
[   29.940000] calling  init_clocksource_sysfs+0x0/0x24 @ 1
[   29.960000] initcall init_clocksource_sysfs+0x0/0x24 returned 0 after 3163 usecs
[   29.970000] calling  init_timer_list_procfs+0x0/0x2c @ 1
[   29.980000] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 113 usecs
[   29.990000] calling  alarmtimer_init+0x0/0xe0 @ 1
[   30.000000] probe of alarmtimer returned 1 after 721 usecs
[   30.010000] initcall alarmtimer_init+0x0/0xe0 returned 0 after 18236 usecs
[   30.020000] calling  init_posix_timers+0x0/0x28 @ 1
[   30.030000] initcall init_posix_timers+0x0/0x28 returned 0 after 652 usecs
[   30.040000] calling  proc_dma_init+0x0/0x20 @ 1
[   30.050000] initcall proc_dma_init+0x0/0x20 returned 0 after 104 usecs
[   30.060000] calling  proc_modules_init+0x0/0x1e @ 1
[   30.070000] initcall proc_modules_init+0x0/0x1e returned 0 after 115 usecs
[   30.080000] calling  kallsyms_init+0x0/0x20 @ 1
[   30.090000] initcall kallsyms_init+0x0/0x20 returned 0 after 111 usecs
[   30.100000] calling  pid_namespaces_init+0x0/0x3c @ 1
[   30.110000] initcall pid_namespaces_init+0x0/0x3c returned 0 after 306 usecs
[   30.120000] calling  utsname_sysctl_init+0x0/0x12 @ 1
[   30.130000] initcall utsname_sysctl_init+0x0/0x12 returned 0 after 338 usecs
[   30.140000] calling  blacklist_init+0x0/0x98 @ 1
[   30.150000] Key type blacklist registered
[   30.160000] initcall blacklist_init+0x0/0x98 returned 0 after 8306 usecs
[   30.170000] calling  kswapd_init+0x0/0x126 @ 1
[   30.190000] initcall kswapd_init+0x0/0x126 returned 0 after 2328 usecs
[   30.210000] calling  slab_proc_init+0x0/0x20 @ 1
[   30.220000] initcall slab_proc_init+0x0/0x20 returned 0 after 112 usecs
[   30.230000] calling  workingset_init+0x0/0x96 @ 1
[   30.240000] workingset: timestamp_bits=11 max_order=14 bucket_order=3
[   30.250000] initcall workingset_init+0x0/0x96 returned 0 after 17007 usecs
[   30.260000] calling  proc_vmalloc_init+0x0/0x24 @ 1
[   30.270000] initcall proc_vmalloc_init+0x0/0x24 returned 0 after 111 usecs
[   30.280000] calling  procswaps_init+0x0/0x1e @ 1
[   30.290000] initcall procswaps_init+0x0/0x1e returned 0 after 109 usecs
[   30.300000] calling  init_frontswap+0x0/0x82 @ 1
[   30.310000] initcall init_frontswap+0x0/0x82 returned 0 after 943 usecs
[   30.320000] calling  slab_sysfs_init+0x0/0xf8 @ 1
[   30.630000] initcall slab_sysfs_init+0x0/0xf8 returned 0 after 299033 usecs
[   30.650000] calling  init_zbud+0x0/0x1e @ 1
[   30.660000] zbud: loaded
[   30.670000] initcall init_zbud+0x0/0x1e returned 0 after 9869 usecs
[   30.680000] calling  fcntl_init+0x0/0x28 @ 1
[   30.690000] initcall fcntl_init+0x0/0x28 returned 0 after 359 usecs
[   30.700000] calling  proc_filesystems_init+0x0/0x20 @ 1
[   30.710000] initcall proc_filesystems_init+0x0/0x20 returned 0 after 113 usecs
[   30.720000] calling  start_dirtytime_writeback+0x0/0x32 @ 1
[   30.730000] initcall start_dirtytime_writeback+0x0/0x32 returned 0 after 46 usecs
[   30.740000] calling  blkdev_init+0x0/0x1e @ 1
[   30.750000] initcall blkdev_init+0x0/0x1e returned 0 after 4240 usecs
[   30.760000] calling  dio_init+0x0/0x2a @ 1
[   30.770000] initcall dio_init+0x0/0x2a returned 0 after 282 usecs
[   30.780000] calling  dnotify_init+0x0/0x74 @ 1
[   30.790000] initcall dnotify_init+0x0/0x74 returned 0 after 666 usecs
[   30.800000] calling  fanotify_user_setup+0x0/0x4e @ 1
[   30.820000] initcall fanotify_user_setup+0x0/0x4e returned 0 after 4929 usecs
[   30.830000] calling  userfaultfd_init+0x0/0x2c @ 1
[   30.840000] initcall userfaultfd_init+0x0/0x2c returned 0 after 3517 usecs
[   30.850000] calling  aio_setup+0x0/0x76 @ 1
[   30.860000] initcall aio_setup+0x0/0x76 returned 0 after 1912 usecs
[   30.870000] calling  init_devpts_fs+0x0/0x2c @ 1
[   30.880000] initcall init_devpts_fs+0x0/0x2c returned 0 after 366 usecs
[   30.890000] calling  ipc_init+0x0/0x26 @ 1
[   30.900000] initcall ipc_init+0x0/0x26 returned 0 after 739 usecs
[   30.910000] calling  ipc_sysctl_init+0x0/0x12 @ 1
[   30.920000] initcall ipc_sysctl_init+0x0/0x12 returned 0 after 654 usecs
[   30.930000] calling  init_mqueue_fs+0x0/0x94 @ 1
[   30.950000] initcall init_mqueue_fs+0x0/0x94 returned 0 after 5222 usecs
[   30.960000] calling  key_proc_init+0x0/0x5e @ 1
[   30.970000] initcall key_proc_init+0x0/0x5e returned 0 after 175 usecs
[   30.980000] calling  crypto_algapi_init+0x0/0xa @ 1
[   30.990000] initcall crypto_algapi_init+0x0/0xa returned 0 after 104 usecs
[   31.010000] calling  dh_init+0x0/0x10 @ 1
[   66.880000] random: crng init done
[  119.910000] initcall dh_init+0x0/0x10 returned 0 after 86804598 usecs
[  119.920000] calling  crypto_null_mod_init+0x0/0x46 @ 1
[  119.940000] initcall crypto_null_mod_init+0x0/0x46 returned 0 after 12298 usecs
[  119.950000] calling  md5_mod_init+0x0/0x10 @ 1
[  119.970000] initcall md5_mod_init+0x0/0x10 returned 0 after 9919 usecs
[  119.980000] calling  sha256_generic_mod_init+0x0/0x14 @ 1
[  120.050000] initcall sha256_generic_mod_init+0x0/0x14 returned 0 after 62200 usecs
[  120.060000] calling  aes_init+0x0/0x10 @ 1
[  120.080000] initcall aes_init+0x0/0x10 returned 0 after 5329 usecs
[  120.090000] calling  crct10dif_mod_init+0x0/0x10 @ 1
[  120.120000] initcall crct10dif_mod_init+0x0/0x10 returned 0 after 16063 usecs
[  120.130000] calling  lzo_mod_init+0x0/0x3a @ 1
[  120.150000] initcall lzo_mod_init+0x0/0x3a returned 0 after 14863 usecs
[  120.160000] calling  proc_genhd_init+0x0/0x3e @ 1
[  120.170000] initcall proc_genhd_init+0x0/0x3e returned 0 after 185 usecs
[  120.180000] calling  bsg_init+0x0/0x118 @ 1
[  120.190000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[  120.200000] initcall bsg_init+0x0/0x118 returned 0 after 9410 usecs
[  120.210000] calling  throtl_init+0x0/0x3e @ 1
[  120.220000] initcall throtl_init+0x0/0x3e returned 0 after 2550 usecs
[  120.230000] calling  noop_init+0x0/0x10 @ 1
[  120.240000] io scheduler noop registered
[  120.250000] initcall noop_init+0x0/0x10 returned 0 after 16498 usecs
[  120.260000] calling  cfq_init+0x0/0x70 @ 1
[  120.270000] io scheduler cfq registered (default)
[  120.280000] initcall cfq_init+0x0/0x70 returned 0 after 10923 usecs
[  120.290000] calling  deadline_init+0x0/0x10 @ 1
[  120.300000] io scheduler mq-deadline registered
[  120.310000] initcall deadline_init+0x0/0x10 returned 0 after 13871 usecs
[  120.320000] calling  crc_t10dif_mod_init+0x0/0x5e @ 1
[  120.330000] initcall crc_t10dif_mod_init+0x0/0x5e returned 0 after 101 usecs
[  120.340000] calling  sg_pool_init+0x0/0xcc @ 1
[  120.370000] initcall sg_pool_init+0x0/0xcc returned 0 after 13144 usecs
[  120.390000] calling  amifb_driver_init+0x0/0x18 @ 1
[  120.670000] Console: switching to colour frame buffer device 80x32
[  120.740000] fb0: Amiga AGA frame buffer device, using 1280K of video memory
[  120.750000] probe of amiga-video returned 1 after 350412 usecs
[  120.760000] initcall amifb_driver_init+0x0/0x18 returned 0 after 345337 usecs
[  120.770000] calling  atyfb_init+0x0/0x544 @ 1
[  120.780000] initcall atyfb_init+0x0/0x544 returned -19 after 45 usecs
[  120.790000] calling  valkyriefb_init+0x0/0x36e @ 1
[  120.800000] initcall valkyriefb_init+0x0/0x36e returned -19 after 44 usecs
[  120.810000] calling  fm2fb_init+0x0/0x40 @ 1
[  120.820000] initcall fm2fb_init+0x0/0x40 returned 0 after 891 usecs
[  120.840000] calling  atafb_init+0x0/0x5da @ 1
[  120.860000] atafb_init: start
[  120.870000] initcall atafb_init+0x0/0x5da returned -19 after 9621 usecs
[  120.880000] calling  macfb_init+0x0/0x750 @ 1
[  120.890000] initcall macfb_init+0x0/0x750 returned -19 after 42 usecs
[  120.910000] calling  dnfb_init+0x0/0x62 @ 1
[  120.920000] initcall dnfb_init+0x0/0x62 returned -19 after 23 usecs
[  120.930000] calling  q40fb_init+0x0/0x58 @ 1
[  120.940000] probe of q40fb.0 returned 0 after 426 usecs
[  120.950000] initcall q40fb_init+0x0/0x58 returned 0 after 7226 usecs
[  120.960000] calling  cirrusfb_init+0x0/0xb8 @ 1
[  120.970000] initcall cirrusfb_init+0x0/0xb8 returned 0 after 1347 usecs
[  120.980000] calling  n_null_init+0x0/0x30 @ 1
[  121.000000] initcall n_null_init+0x0/0x30 returned 0 after 23 usecs
[  121.010000] calling  pty_init+0x0/0x208 @ 1
[  121.030000] initcall pty_init+0x0/0x208 returned 0 after 3976 usecs
[  121.040000] calling  sysrq_init+0x0/0x68 @ 1
[  121.050000] initcall sysrq_init+0x0/0x68 returned 0 after 141 usecs
[  121.060000] calling  init_pmz+0x0/0xb0 @ 1
[  121.070000] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[  121.080000] initcall init_pmz+0x0/0xb0 returned -19 after 10495 usecs
[  121.090000] calling  amiga_serial_driver_init+0x0/0x18 @ 1
[  121.100000] Amiga-builtin serial driver version 4.30
[  121.110000] ttyS0 is the amiga builtin serial port
[  121.120000] probe of amiga-serial returned 1 after 22084 usecs
[  121.130000] initcall amiga_serial_driver_init+0x0/0x18 returned 0 after 35402 usecs
[  121.140000] calling  nvram_init+0x0/0x90 @ 1
[  121.150000] initcall nvram_init+0x0/0x90 returned -19 after 19 usecs
[  121.170000] calling  topology_sysfs_init+0x0/0x26 @ 1
[  121.180000] initcall topology_sysfs_init+0x0/0x26 returned 0 after 665 usecs
[  121.190000] calling  cacheinfo_sysfs_init+0x0/0x28 @ 1
[  121.200000] initcall cacheinfo_sysfs_init+0x0/0x28 returned -2 after 41 usecs
[  121.210000] calling  z2_init+0x0/0xea @ 1
[  121.240000] initcall z2_init+0x0/0xea returned 0 after 13993 usecs
[  121.250000] calling  adbhid_init+0x0/0x26 @ 1
[  121.260000] initcall adbhid_init+0x0/0x26 returned 0 after 78 usecs
[  121.270000] calling  pmu_device_init+0x0/0x2c @ 1
[  121.280000] initcall pmu_device_init+0x0/0x2c returned 0 after 21 usecs
[  121.290000] calling  via_pmu_dev_init+0x0/0xd8 @ 1
[  121.300000] initcall via_pmu_dev_init+0x0/0xd8 returned -19 after 20 usecs
[  121.310000] calling  via_cuda_start+0x0/0x70 @ 1
[  121.320000] initcall via_cuda_start+0x0/0x70 returned -19 after 24 usecs
[  121.330000] calling  adb_init+0x0/0x118 @ 1
[  121.340000] initcall adb_init+0x0/0x118 returned 0 after 18 usecs
[  121.350000] calling  spi_transport_init+0x0/0x80 @ 1
[  121.360000] initcall spi_transport_init+0x0/0x80 returned 0 after 1168 usecs
[  121.370000] calling  mvme147_init+0x0/0x120 @ 1
[  121.380000] initcall mvme147_init+0x0/0x120 returned 0 after 20 usecs
[  121.390000] calling  net_olddevs_init+0x0/0x5e @ 1
[  121.400000] initcall net_olddevs_init+0x0/0x5e returned 0 after 343 usecs
[  121.410000] calling  mac_mace_driver_init+0x0/0x12 @ 1
[  121.420000] initcall mac_mace_driver_init+0x0/0x12 returned 0 after 1000 usecs
[  121.430000] calling  amiga_zorro_init+0x0/0x18 @ 1
[  121.440000] Zorro: Probing AutoConfig expansion devices: 1 device
[  121.450000] probe of amiga-zorro returned 1 after 8278 usecs
[  121.460000] initcall amiga_zorro_init+0x0/0x18 returned 0 after 16717 usecs
[  121.470000] calling  zorro_proc_init+0x0/0xc6 @ 1
[  121.480000] initcall zorro_proc_init+0x0/0xc6 returned 0 after 249 usecs
[  121.490000] calling  serport_init+0x0/0x2c @ 1
[  121.500000] initcall serport_init+0x0/0x2c returned 0 after 29 usecs
[  121.520000] calling  q40kbd_driver_init+0x0/0x1a @ 1
[  121.530000] initcall q40kbd_driver_init+0x0/0x1a returned -19 after 1401 usecs
[  121.550000] calling  input_leds_init+0x0/0x10 @ 1
[  121.560000] initcall input_leds_init+0x0/0x10 returned 0 after 47 usecs
[  121.570000] calling  mousedev_init+0x0/0x8a @ 1
[  121.580000] mousedev: PS/2 mouse device common for all mice
[  121.590000] initcall mousedev_init+0x0/0x8a returned 0 after 12161 usecs
[  121.600000] calling  amikbd_driver_init+0x0/0x18 @ 1
[  121.620000] input: amiga-keyboard as /devices/platform/amiga-keyboard/input/input0
[  121.630000] probe of amiga-keyboard returned 1 after 18950 usecs
[  121.640000] initcall amikbd_driver_init+0x0/0x18 returned 0 after 28339 usecs
[  121.650000] calling  atakbd_init+0x0/0xda @ 1
[  121.660000] initcall atakbd_init+0x0/0xda returned -19 after 21 usecs
[  121.670000] calling  atkbd_init+0x0/0x1a @ 1
[  121.680000] initcall atkbd_init+0x0/0x1a returned 0 after 1122 usecs
[  121.690000] calling  generic_rtc_driver_init+0x0/0x18 @ 1
[  121.700000] initcall generic_rtc_driver_init+0x0/0x18 returned -19 after 1438 usecs
[  121.710000] calling  rp5c01_rtc_driver_init+0x0/0x18 @ 1
[  121.730000] initcall rp5c01_rtc_driver_init+0x0/0x18 returned -19 after 1734 usecs
[  121.740000] calling  ledtrig_disk_init+0x0/0x4a @ 1
[  121.750000] initcall ledtrig_disk_init+0x0/0x4a returned 0 after 177 usecs
[  121.760000] calling  ledtrig_cpu_init+0x0/0x98 @ 1
[  121.770000] ledtrig-cpu: registered to indicate activity on CPUs
[  121.790000] initcall ledtrig_cpu_init+0x0/0x98 returned 0 after 16658 usecs
[  121.800000] calling  ledtrig_panic_init+0x0/0x36 @ 1
[  121.810000] initcall ledtrig_panic_init+0x0/0x36 returned 0 after 102 usecs
[  121.820000] calling  sock_diag_init+0x0/0x48 @ 1
[  121.830000] initcall sock_diag_init+0x0/0x48 returned 0 after 579 usecs
[  121.840000] calling  blackhole_init+0x0/0x10 @ 1
[  121.850000] initcall blackhole_init+0x0/0x10 returned 0 after 28 usecs
[  121.860000] calling  gre_offload_init+0x0/0x46 @ 1
[  121.870000] initcall gre_offload_init+0x0/0x46 returned 0 after 33 usecs
[  121.880000] calling  sysctl_ipv4_init+0x0/0x44 @ 1
[  121.900000] initcall sysctl_ipv4_init+0x0/0x44 returned 0 after 5844 usecs
[  121.910000] calling  cubictcp_register+0x0/0x7a @ 1
[  121.920000] initcall cubictcp_register+0x0/0x7a returned 0 after 46 usecs
[  121.930000] calling  packet_init+0x0/0x44 @ 1
[  121.940000] NET: Registered protocol family 17
[  121.950000] initcall packet_init+0x0/0x44 returned 0 after 1467 usecs
[  121.960000] calling  strp_mod_init+0x0/0x2e @ 1
[  121.980000] initcall strp_mod_init+0x0/0x2e returned 0 after 4072 usecs
[  121.990000] calling  mpls_gso_init+0x0/0x2e @ 1
[  122.000000] mpls_gso: MPLS GSO support
[  122.010000] initcall mpls_gso_init+0x0/0x2e returned 0 after 10961 usecs
[  122.020000] calling  unregister_early_console+0x0/0x22 @ 1
[  122.030000] initcall unregister_early_console+0x0/0x22 returned 0 after 19 usecs
[  122.040000] calling  init_oops_id+0x0/0x46 @ 1
[  122.050000] initcall init_oops_id+0x0/0x46 returned 0 after 139 usecs
[  122.060000] calling  pm_qos_power_init+0x0/0xa2 @ 1
[  122.080000] initcall pm_qos_power_init+0x0/0xa2 returned 0 after 10459 usecs
[  122.090000] calling  printk_late_init+0x0/0x13e @ 1
[  122.100000] initcall printk_late_init+0x0/0x13e returned 0 after 42 usecs
[  122.110000] calling  tk_debug_sleep_time_init+0x0/0x36 @ 1
[  122.120000] initcall tk_debug_sleep_time_init+0x0/0x36 returned 0 after 279 usecs
[  122.140000] calling  taskstats_init+0x0/0x34 @ 1
[  122.150000] registered taskstats version 1
[  122.160000] initcall taskstats_init+0x0/0x34 returned 0 after 8128 usecs
[  122.170000] calling  fault_around_debugfs+0x0/0x34 @ 1
[  122.180000] initcall fault_around_debugfs+0x0/0x34 returned 0 after 403 usecs
[  122.190000] calling  init_zswap+0x0/0x3e0 @ 1
[  122.200000] zswap: loaded using pool lzo/zbud
[  122.220000] initcall init_zswap+0x0/0x3e0 returned 0 after 13448 usecs
[  122.230000] calling  set_hardened_usercopy+0x0/0x76 @ 1
[  122.250000] initcall set_hardened_usercopy+0x0/0x76 returned 1 after 23 usecs
[  122.260000] calling  init_root_keyring+0x0/0x6 @ 1
[  122.270000] initcall init_root_keyring+0x0/0x6 returned 0 after 786 usecs
[  122.280000] calling  prandom_reseed+0x0/0x2c @ 1
[  122.290000] initcall prandom_reseed+0x0/0x2c returned 0 after 182 usecs
[  122.300000] calling  deferred_probe_initcall+0x0/0x8e @ 1
[  122.320000] initcall deferred_probe_initcall+0x0/0x8e returned 0 after 1847 usecs
[  122.330000] calling  via_pmu_event_init+0x0/0x80 @ 1
[  122.340000] initcall via_pmu_event_init+0x0/0x80 returned -19 after 20 usecs
[  122.360000] calling  rtc_hctosys+0x0/0xf4 @ 1
[  122.370000] hctosys: unable to open rtc device (rtc0)
[  122.380000] initcall rtc_hctosys+0x0/0xf4 returned -19 after 5087 usecs
[  122.390000] calling  tcp_congestion_default+0x0/0x16 @ 1
[  122.400000] initcall tcp_congestion_default+0x0/0x16 returned 0 after 35 usecs
[  122.420000] Freeing unused kernel memory: 156K
[  122.430000] This architecture does not have kernel memory protection.
[  122.440000] Run /init as init process
[  126.690000] calling  ide_init+0x0/0x7c [ide_core] @ 43
[  126.700000] Uniform Multi-Platform E-IDE driver
[  126.710000] initcall ide_init+0x0/0x7c [ide_core] returned 0 after 7988 usecs
[  126.980000] calling  amiga_gayle_ide_driver_init+0x0/0x1c [gayle] @ 43
[  126.990000] ide: Gayle IDE controller (A1200 style)
[  127.000000] Probing IDE interface ide0...
[  127.390000] hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
[  127.540000] hda: SAMSUNG MP0402H, ATA DISK drive
[  127.610000] Z2RAM: using 0K Zorro II RAM and 512K Chip RAM (Total 512K)
[  127.980000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
[  128.200000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
[  148.570000] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-udevd:43]
[  148.570000] Modules linked in: gayle(+) ide_core
[  148.570000] Format 00  Vector: 0078  PC: 00050b58  Status: 2200    Not tainted
[  148.570000] ORIG_D0: ffffffff  D0: 00000064  A2: 0151ef90  A1: 80bfe001
[  148.570000] A0: 003f0c12  D5: 00000000  D4: 0000000a
[  148.570000] D3: 00400140  D2: 00000001  D1: 8e6f286a
[  759.250000] amikbd: Ctrl-Amiga-Amiga reset warning!!
[  759.260000] amikbd: Ctrl-Amiga-Amiga reset warning!!

Attachment: signature.asc
Description: OpenPGP digital signature


Reply to: