Hi, again,
On 6/7/19 1:27 AM, John Paul Adrian Glaubitz wrote:
Hi!
On 6/6/19 11:22 PM, Szymon Bieganski wrote:
stock 1D4 Amiga 1200 with Apollo 040 CPU card, recent Elbox FastATA IDE
controller with 40G IDE HDD and PCMCIA network card. All components
causes no problems with other OS'es and with neither KS 3.0, 3.1 nor
3.1.4 (might be important during boot-off of partition beyond 4G boundary).
You did not mention how much RAM you have which is rather important
to know. And how fast is the 040 clocked?
Apollo 1240 with full 68040 clocked at 40MHz with (continuous block of)
64MB of RAM.
Can you please post all relevant information here so that we don't rely
on external sites?
Below a full dmesg while booting 4.19.0-5, which I extracted from
installation ISO's. Amiboot was started with -r pointing to the
cdrom/initrd.gz
-----------------------------
ABCDGHIJK
[ 0.000000] Linux version 4.19.0-5-m68k (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 Debian 4.19.37-1 (2019-05-05)
[ 0.000000] Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO
[ 0.000000] initrd: 037566b5 - 04000000
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16224
[ 0.000000] Kernel command line: init=/dev/bash root=/dev/ram console=tty0 console=ttyS0,9600n8 video=amifb:pal-lace modprobe.blacklist=amiflop
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 51408K/65536K available (2870K kernel code, 399K rwdata, 1004K rodata, 156K init, 202K bss, 14128K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2c/0x498 with crng_init=0
[ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[ 0.000000] NR_IRQS: 200
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.140000] console [ttyS0] enabled
[ 0.150000] Calibrating delay loop... 26.16 BogoMIPS (lpj=130816)
[ 0.270000] pid_max: default: 32768 minimum: 301
[ 0.290000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.300000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.380000] devtmpfs: initialized
[ 0.410000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.440000] NET: Registered protocol family 16
[ 0.590000] SCSI subsystem initialized
[ 0.620000] VFS: Disk quotas dquot_6.6.0
[ 0.630000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.830000] NET: Registered protocol family 2
[ 0.860000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.870000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.880000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.890000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.900000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.910000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.930000] NET: Registered protocol family 1
[ 0.940000] NET: Registered protocol family 44
[ 0.950000] Unpacking initramfs...
[ 1.280000] random: fast init done
[ 26.660000] Freeing initrd memory: 8868K
[ 26.680000] Key type blacklist registered
[ 26.690000] workingset: timestamp_bits=11 max_order=14 bucket_order=3
[ 27.010000] zbud: loaded
[ 66.880000] random: crng init done
[ 116.050000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 116.060000] io scheduler noop registered
[ 116.080000] io scheduler cfq registered (default)
[ 116.090000] io scheduler mq-deadline registered
[ 116.370000] Console: switching to colour frame buffer device 80x32
[ 116.450000] fb0: Amiga AGA frame buffer device, using 1280K of video memory
[ 116.460000] atafb_init: start
[ 116.480000] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 116.490000] Amiga-builtin serial driver version 4.30
[ 116.500000] ttyS0 is the amiga builtin serial port
[ 116.530000] Zorro: Probing AutoConfig expansion devices: 1 device
[ 116.550000] mousedev: PS/2 mouse device common for all mice
[ 116.570000] input: amiga-keyboard as /devices/platform/amiga-keyboard/input/input0
[ 116.590000] ledtrig-cpu: registered to indicate activity on CPUs
[ 116.610000] NET: Registered protocol family 17
[ 116.630000] mpls_gso: MPLS GSO support
[ 116.660000] registered taskstats version 1
[ 116.670000] zswap: loaded using pool lzo/zbud
[ 116.690000] hctosys: unable to open rtc device (rtc0)
[ 116.710000] Freeing unused kernel memory: 156K
[ 116.720000] This architecture does not have kernel memory protection.
[ 116.730000] Run /init as init process
[ 120.980000] Uniform Multi-Platform E-IDE driver
[ 121.190000] ide: Gayle IDE controller (A1200 style)
[ 121.500000] hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a)
[ 121.650000] hda: SAMSUNG MP0402H, ATA DISK drive
[ 121.850000] Z2RAM: using 0K Zorro II RAM and 512K Chip RAM (Total 512K)
[ 122.080000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
[ 122.300000] hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a)
[ 144.390000] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-udevd:45]
[ 144.390000] Modules linked in: gayle(+) ide_core
[ 144.390000] Format 00 Vector: 0078 PC: 00050b6c Status: 2204 Not tainted
[ 144.390000] ORIG_D0: ffffffff D0: 00000001 A2: 015193b0 A1: 80bfe001
[ 144.390000] A0: 003f0c12 D5: 00000000 D4: 002c66d2
[ 144.390000] D3: 00000002 D2: 00000000 D1: 8ed2ba3d
[ 1337.790000] amikbd: Ctrl-Amiga-Amiga reset warning!!
[ 1337.800000] amikbd: Ctrl-Amiga-Amiga reset warning!!
-----------------------------
Try passing "init=/bin/bash" on the kernel command line.
See above - no difference.
ABCDGHIJK
Linux version 4.19.37-amiga (root@nb) (gcc version 8.3.0 (Debian
8.3.0-7)) #1 Sun May 26 21:20:29 UTC 2019
That's not a Debian kernel you are booting here. Where does this kernel
come from?
This particular was actually build in debootstrap environment following
the instruction found in https://www.subsecret.dk/wiki/Linux_on_Amiga
I hope I cleared any doubts.
Szymon