dvd+rw-tools 7.1, Blu-Ray, and INVALID FIELD IN CDB on session close
Hello,
Please see the issue I posted here with my new Pioneer BDR-205 fw 1.03:
http://club.myce.com/f143/cant-close-session-bdr-205-external-macally-cm-s525u-308505/
I then found the following posts on this ML explaining quite similar
problems:
http://www.mail-archive.com/cdwrite@other.debian.org/msg13071.html
http://www.mail-archive.com/cdwrite@other.debian.org/msg13093.html
I followed the advice in the last post to try cdrskin instead, and this
is what happened (0.7.6.pl00-2):
$ mkisofs -rJ . | cdrskin -v dev=/dev/sr1 blank=format_if_needed [tried with speed=4 also] -
cdrskin 0.7.6 : limited cdrecord compatibility wrapper for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given dev='/dev/sr1'
cdrskin: scanning for devices ...
I: -input-charset not specified, using utf-8 (detected in locale settings)
[...]
cdrskin: status 1 burn_disc_blank "The drive holds a blank disc"
Current: BD-R sequential recording
Track 01: data unknown length
Total size: 0 MB (00:00.00) = 0 sectors
Lout start: 0 MB (00:02/00) = 0 sectors
Starting to write CD/DVD at speed MAX in real TAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 5 MB written (fifo 98%) [buf 25%] 4.0x. 0.04% done, estimate finish Mon Feb 8 11:09:41 2010
Track 01: 7 MB written (fifo 99%) [buf 40%] 1.3x.cdrskin: FATAL : SCSI error on write(3632,16): [5 21 02] Invalid address
cdrskin: thank you for being patient for 20 seconds
Track 01: Total bytes read/written: 7471104/7438336 (3632 sectors).
Writing time: 19.746s
Cdrskin: fifo had 5727 puts and 3679 gets.
Cdrskin: fifo was 0 times empty and 1160 times full, min fill was 97%.
Min drive buffer fill was 0%
cdrskin: burning failed
cdrskin: FATAL : burning failed.
No errors in dmesg (aside from those related to inserting the blank
disc).
Then I tried the same command again:
[...]
cdrskin: ... scanning for devices done
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an incomplete disc in the drive"
Current: BD-R sequential recording
cdrskin: beginning to burn disc
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an incomplete disc in the drive"
Current: BD-R sequential recording
Track 01: data unknown length
Total size: 0 MB (00:00.00) = 0 sectors
Lout start: 0 MB (00:02/00) = 0 sectors
Starting to write CD/DVD at speed MAX in real TAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 3616
cdrskin: thank you for being patient for 3 seconds cdrskin: FATAL : SCSI error on write(0,16): [5 21 02] Invalid address
Track 01: Total bytes read/written: 32768/0 (0 sectors).
Writing time: 3.825s
Cdrskin: fifo had 2095 puts and 47 gets.
Cdrskin: fifo was 0 times empty and 0 times full, min fill was 100%.
Min drive buffer fill was 50%
cdrskin: burning failed
cdrskin: FATAL : burning failed.
So I'm baffled how to simply write an ISO filesystem to a Blu-Ray disc
without errors...
--
Ryan C. Underwood, <nemesis@icequake.net>
Reply to: