Re: WRITE@LBA=3e0c30h failed with SK=3h/WRITE ERROR]: Input/output error (DL)
Hi,
> Question
> is if above is actually complete growisofs command line?
It comes out of a wrapper script that converts
cdrecord options into runs of dvd+rw-tools.
The write command is supposed to be:
growisofs \
-use-the-force-luke \
-use-the-force-luke=bufsize:16m \
-use-the-force-luke=noload \
-Z /dev/...=/dev/fd/0
Eventually there is also option
speed=...
> Point is that growisofs does *not* set layer break,
> if you don't pass -dvd-compat [or -dvd-video]
Hmm. That would also make questionable my
argumentation about Problem 2.
So if growisofs did not issue a layer break position
then Gregoire's drive may or may not have Problem 1.
But in Gregoire's scripts i do read -dvd-compat.
So probably the theory about number 2 still stands.
As for scdbackup:
I am quite sure that the failed growisofs run
for scdbackup was not with -dvd-compat or any other
option which causes a fixed size. The growisofs
wrapper works fine for sequential DVD-RW where
such a setting would cause the same error.
Obvious is the relation of error position, error
message and size of the plain ISO image.
Regrettably i cannot get that user to make more
experiments which each eat up one DL media.
The problem will have to wait for the next occasion
to show up.
Have a nice day :)
Thomas
Reply to: