Re: [cdwrite] Re: WRITE@LBA=3e0c30h failed with SK=3h/WRITE ERROR]: Input/output error (DL)
Gregoire Favre <gregoire.favre@gmail.com> wrote:
> Hello,
>
> I have tried with
> mkisofs $OPTS -V $1 $2|cdrecord driveropts=layerbreak=2086912 $COMCD tsize="$SIZE"s -
>
> Which I am not sure of the syntax... I don't fully understand cdrecord
> man page.
>
> Unfortunately :
>
> Track 01: 4041 of 8124 MB written (fifo 100%) [buf 99%] 8.4x. 61.66% done, estimate finish Thu May 15 22:44:57 2008
> Track 01: 4051 of 8124 MB written (fifo 99%) [buf 99%] 8.4x. 61.78% done, estimate finish Thu May 15 22:44:56 2008
> Track 01: 4061 of 8124 MB written (fifo 99%) [buf 99%] 8.3x. 61.90% done, estimate finish Thu May 15 22:44:55 2008
> Track 01: 4070 of 8124 MB written (fifo 99%) [buf 99%] 8.5x. 62.02% done, estimate finish Thu May 15 22:44:55 2008
> Track 01: 4075 of 8124 MB written (fifo 99%) [buf 99%] 8.2x.cdrecord: faio_wait_on_buffer for writer timed out.
> cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB: 2A 00 00 1F D7 E9 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
> Sense Key: 0x0 No Additional Sense, Segment 11
> Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 255.841s timeout 100s
> cdrecord: No such device or address. Cannot send SCSI cmd via ioctl.
This is the first useful error message. It finally lead to the underlying
problem.
When I started to add Dual Layer support to cdrecord, I intended to follow the
standard that requires to align writes at the layer break. It got somehow
forgotten during the work and several people reported that cdrecord worked fine
for them.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni)
schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
Reply to: