[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Errors with 8x media, works in other OS



Hello,

I am having problems with burning 8X DVD+R media with growisofs.

My drive is a Lite-On 1633S with the latest(BS0S) firmware.  It is capable
of burning up to 16X DVD+R, up to 8X DVD-R, and 4X DVD+/-RW.  The media is 
supported by the firmware.  I *can* burn 8x DVD+R disks (at 8x) in Windows 
2000 on the same machine.  These are all the DVD media types I have tried:

(SONY/S11)      4x DVD+RW       Works
(SONY04D1)      4x DVD-R        Works
(YUDEN000/T02)  8x DVD+R	Fails
(RICOHJPN/R02)  8x DVD+R        Fails

My kernel is 2.4.29 with an ntfs patch.  I am NOT using the dvd+rw kernel
patch.  I'm using the ide-scsi module.  I use an nvidia binary driver but 
the error occurs whether X is started or not.  I have an Athlon XP 2000 
with a via chipset.

My version of the tools is: dvd+rw-tools-5.21.4.10.8.tar.gz

After a *failure*, my drive drops to PIO mode, so I have been doing a 
complete power cycle to make sure the failure is due to attempts on a 
particular disk type.  Before and after a good burn 'cat /proc/ide/via' 
shows the drive is in UDMA mode, Transfer Rate: 66.6MB/s.  hdparm says 
the drive is in udma4 mode.

I have ~50 of the (YUDEN000/T02) 8x disks to play with.  Does anyone have 
any suggestions as to how I might get them to work in Linux?  I have 
included lots of info....


  - Peter F.  Curran
    curran at rpi dot edu


-dmesg for the drive ------------------------------------------------------

hda: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: LITE-ON   Model: DVDRW SOHW-1633S  Rev: BS0S
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12

-hdparm -I and -v for the drive -------------------------------------------

ATAPI CD-ROM, with removable media
        Model Number:       LITE-ON DVDRW SOHW-1633S                
        Serial Number:      
        Firmware Revision:  BS0S    
Standards:
        Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
        Supported: CD-ROM ATAPI-2 
Configuration:
        DRQ response: 50us.
        Packet size: 12 bytes
Capabilities:
        LBA, IORDY(cannot be disabled)
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4 
             Cycle time: no flow control=227ns  IORDY flow control=120ns

 HDIO_GET_MULTCOUNT failed: Invalid argument
 IO_support   =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 BLKRAGET failed: Invalid argument
 HDIO_GETGEO failed: Invalid argument

-Sample bad burn command --------------------------------------------------

growisofs -Z /dev/dvd -dvd-video dvd/
Executing 'mkisofs -dvd-video dvd/ | builtin_dd of=/dev/dvd obs=32k seek=0'
/dev/dvd: "Current Write Speed" is 3.3x1385KBps.
:-[ WRITE@LBA=0h failed with SK=2h/ASC=04h/ACQ=01h]: No medium found
:-( write failed: No medium found

-dmesg output from bad burn ------------------------------------------------

scsi : aborting command due to timeout : pid 55132, scsi0, channel 0, id 0, lun
0 Write (10) 00 00 00 00 00 00 00 10 00
hda: error waiting for DMA
hda: dma timeout retry: status=0xd0 { Busy }
hda: DMA disabled
hda: ATAPI reset complete
hda: irq timeout: status=0xc0 { Busy }
hda: ATAPI reset complete
hda: irq timeout: status=0xc0 { Busy }
hda: ATAPI reset complete
hda: irq timeout: status=0xc0 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 55141, scsi0, channel 0, id 0, lun
0 Write (10) 00 00 00 00 00 00 00 10 00
hda: irq timeout: status=0xd0 { Busy }
hda: ATAPI reset complete
hda: irq timeout: status=0xc0 { Busy }
hda: ATAPI reset complete
hda: irq timeout: status=0xc0 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.

- "dvd+rw-mediainfo /dev/dvd" outputs for two bad media ---------------------

INQUIRY:                [LITE-ON ][DVDRW SOHW-1633S][BS0S]
GET [CURRENT] CONFIGURATION:
 Mounted Media:         1Bh, DVD+R
 Media ID:              RICOHJPN/R02
 Current Write Speed:   8.0x1385=11080KB/s
 Write Speed #0:        8.0x1385=11080KB/s
 Write Speed #1:        6.0x1385=8310KB/s
 Write Speed #2:        4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
 Write Performance:     3.2x1385=4432KB/s@[0 -> 0]
 Speed Descriptor#0:    00/0 R@3.2x1385=4432KB/s W@8.0x1385=11080KB/s
 Speed Descriptor#1:    00/0 R@3.2x1385=4432KB/s W@6.0x1385=8310KB/s
 Speed Descriptor#2:    00/0 R@3.2x1385=4432KB/s W@4.0x1385=5540KB/s
READ DVD STRUCTURE[#0h]:
 Media Book Type:       A1h, DVD+R book [revision 1]
 Legacy lead-out at:    2295104*2KB=4700372992
READ DISC INFORMATION:
 Disc status:           blank
 Number of Sessions:    1
 State of Last Session: empty
 Number of Tracks:      1
READ TRACK INFORMATION[#1]:
 Track State:           blank
 Track Start Address:   0*2KB
 Next Writable Address: 0*2KB
 Free Blocks:           2295104*2KB
 Track Size:            2295104*2KB
 ROM Compatibility LBA: 262144
READ CAPACITY:          1*2048=2048


INQUIRY:                [LITE-ON ][DVDRW SOHW-1633S][BS0S]
GET [CURRENT] CONFIGURATION:
 Mounted Media:         1Bh, DVD+R
 Media ID:              YUDEN000/T02
 Current Write Speed:   8.0x1385=11080KB/s
 Write Speed #0:        8.0x1385=11080KB/s
 Write Speed #1:        6.0x1385=8310KB/s
 Write Speed #2:        4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
 Write Performance:     3.2x1385=4432KB/s@[0 -> 0]
 Speed Descriptor#0:    00/0 R@3.2x1385=4432KB/s W@8.0x1385=11080KB/s
 Speed Descriptor#1:    00/0 R@3.2x1385=4432KB/s W@6.0x1385=8310KB/s
 Speed Descriptor#2:    00/0 R@3.2x1385=4432KB/s W@4.0x1385=5540KB/s
READ DVD STRUCTURE[#0h]:
 Media Book Type:       A1h, DVD+R book [revision 1]
 Legacy lead-out at:    2295104*2KB=4700372992
READ DISC INFORMATION:
 Disc status:           blank
 Number of Sessions:    1
 State of Last Session: empty
 Number of Tracks:      1
READ TRACK INFORMATION[#1]:
 Track State:           blank
 Track Start Address:   0*2KB
 Next Writable Address: 0*2KB
 Free Blocks:           2295104*2KB
 Track Size:            2295104*2KB
 ROM Compatibility LBA: 262144
READ CAPACITY:          1*2048=2048


- Sample of good burn: ---------------------------------------------------

growisofs -Z /dev/dvd -dvd-video dvd/
Executing 'mkisofs -dvd-video dvd/ | builtin_dd of=/dev/dvd obs=32k seek=0'
/dev/dvd: pre-formatting blank DVD+RW...
/dev/dvd: "Current Write Speed" is 4.1x1385KBps.
  0.32% done, estimate finish Tue Feb 22 10:19:02 2005
  0.64% done, estimate finish Tue Feb 22 09:34:40 2005
  0.95% done, estimate finish Tue Feb 22 09:19:47 2005
  1.27% done, estimate finish Tue Feb 22 09:11:05 2005
...
 99.77% done, estimate finish Tue Feb 22 08:49:29 2005
Total translation table size: 0
Total rockridge attributes bytes: 0
Total directory bytes: 4096
Path table size(bytes): 42
Max brk space used 5284
1573648 extents written (3073 Mb)
builtin_dd: 1573648*2KB out @ average 4.0x1385KBps
/dev/dvd: flushing cache
/dev/dvd: writing lead-out
/dev/dvd: reloading tray

- "dvd+rw-mediainfo /dev/dvd" output for 8x media burned with Win2K -----

INQUIRY:                [LITE-ON ][DVDRW SOHW-1633S][BS0S]
GET [CURRENT] CONFIGURATION:
 Mounted Media:         1Bh, DVD+R
 Media ID:              YUDEN000/T02
 Current Write Speed:   8.0x1385=11080KB/s
 Write Speed #0:        8.0x1385=11080KB/s
 Write Speed #1:        6.0x1385=8310KB/s
 Write Speed #2:        4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
 Write Performance:     3.2x1385=4432KB/s@0 -> 6.3x1385=8672KB/s@1466335
 Speed Descriptor#0:    00/1466335 R@6.3x1385=8672KB/s W@8.0x1385=11080KB/s
 Speed Descriptor#1:    00/1466335 R@6.3x1385=8672KB/s W@6.0x1385=8310KB/s
 Speed Descriptor#2:    00/1466335 R@6.3x1385=8672KB/s W@4.0x1385=5540KB/s
READ DVD STRUCTURE[#0h]:
 Media Book Type:       A1h, DVD+R book [revision 1]
 Legacy lead-out at:    1466336*2KB=3003056128
READ DISC INFORMATION:
 Disc status:           complete
 Number of Sessions:    1
 State of Last Session: complete
 Number of Tracks:      1
READ TRACK INFORMATION[#1]:
 Track State:           invisible
 Track Start Address:   0*2KB
 Free Blocks:           0*2KB
 Track Size:            1466336*2KB
 ROM Compatibility LBA: 262144
FABRICATED TOC:
 Track#1  :             14@0
 Track#AA :             14@1466336
 Multi-session Info:    #1@0
READ CAPACITY:          1466336*2048=3003056128



Reply to: