Re: plextor px-708uf: cannot get disk type
>From magliery@csb.yale.edu Mon Jan 19 20:45:02 2004
>I updated the Plextor PX-708UF firmware to 1.04 using PXUpdate in linux.
> I still get the same error, either in xcdroast or when I do dvdrecord
>-atip dev=0,0,0 in single user mode:
>==========
>scsidev: '0,0,0'
>scsibus: 0 target: 0 lun: 0
>Linux sg driver version: 3.1.24
>Cdrecord-ProDVD-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C)
>1995-2004 Jörg Schilling
>Unlocked features: ProDVD Clone
>Limited features:
>This copy of cdrecord is licensed for:
>private/research/educational_non-commercial_use
>Using libscg version 'schily-0.8'.
>Device type : Removable CD-ROM
>Version : 2
>Response Format: 1
>Vendor_info : 'PLEXTOR '
>Identifikation : 'DVDR PX-708A '
>Revision : '1.04'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
>Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
>cdrecord.prodvd: Input/output error. read disk info: scsi sendcmd: no error
>CDB: 51 00 00 00 00 00 00 00 24 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00
>Sense Key: 0x0 No Additional Sense, Segment 0
>Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.002s timeout 240s
>cdrecord.prodvd: Cannot get disk type.
>===============
OK, so please run a test in single user mode and check for console (kernel)
messages.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: