[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]


Hi to all !!

	I use xcdroast with cdrecord-prodvd and it happens that when I burn
CD-R it ejects the disc and end the burning normaly. But when I
burn a DVD I get the following error:

Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORDPRODVD dev=
"ATAPI:0,0,0" gracetime=10 fs=4096k driveropts=burnfree -v -useinfo
speed=18 -dao -eject -pad -data "/home/sasa/track-01.iso" ...

scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
SCSI buffer size: 64512
Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C)
1995-2004 Jörg Schilling
Unlocked features: ProDVD Clone
Limited  features:
This copy of cdrecord is licensed for:
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-K12D'
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+R
Profile: DVD+R (current)
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
pregap1: -1
Track 01: data  3014 MB         padsize:   30 KB
Total size:     3014 MB = 1543663 sectors
Current Secsize: 2048
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 751441
Starting to write CD/DVD at speed 2 in real SAO mode for single session.

Waiting for reader process to fill input buffer ...
input buffer ready.
Starting new track at sector: 0

Track 01: writing  30 KB of pad data.
Track 01: Total bytes read/written: 3161391104/3161421824 (1543663
Writing  time: 4757.046s
Average write speed   0.5x.
Min drive buffer fill was 6%
Fixating time:    4.797s
cdrecord.prodvd: Input/output error. start/stop unit: scsi sendcmd:
retryable error
CDB:  1B 00 00 00 02 00
status: 0xa (Reserved)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 07 00 80 C8 F2 00 00
00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x07 (logical unit not ready, operation in
progress) Fru 0x0
Sense flags: Blk 0 (not valid) operation 78% done
cmd finished after 22.003s timeout 100s
cdrecord.prodvd: Cannot eject media.
cdrecord.prodvd: fifo had 49796 puts and 49796 gets.
cdrecord.prodvd: fifo was 0 times empty and 13706 times full, min fill
was 81%.

I use Slackware 9.1 on a Sony Vaio PCG-GRT816S laptop.
Any sugestion would be very apreciated.


Reply to: