[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problem using a TEAC DV-W22E with dvd+rw-tools/cdrecord-prodvd/dvdrtools.

>From: "Julien Gabel" <jpeg@thilelli.net>

>> It does not seem that you really used cdrecord-ProDVD!
>> If you don't use it and give error messages, it is hard to help

>Ok, sorry for the _bad_ information. Here is what I get if I try to use
>cdrecord-ProDVD (obtained from ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
>cdrecord-prodvd-2.01a24-i386-unknown-freebsd5.2), see below.

>> It is absolutely not recommended to format DVD-RW media.

>I try to put a DVD-RW in the restricted overwrite format, this is why I
>try (wihout success) to format it using:
> # dvd+rw-format /dev/cd0

>> If you ever did format it, you _need_ to run cdrecord blank=full
>> to make it usable again.

>I get the following error trying to blank the DVD-RW media:

You areusing a defektive kernel!

Your kernel does not implement ATAPI CAP auto sense which is required.

Upgrade to a fixed kernel

># ./cdrecord-wrapper.sh -v -blank=all dev=3,0,0
>Cdrecord-ProDVD-Clone 2.01a24 (i386-unknown-freebsd5.2) Copyright (C)
>1995-2004 Jörg Schilling
>Unlocked features: ProDVD Clone
>Limited  features:
>This copy of cdrecord is licensed for:
>TOC Type: 1 = CD-ROM
>scsidev: '3,0,0'
>scsibus: 3 target: 0 lun: 0
>Using libscg version 'schily-0.8'.
>SCSI buffer size: 64512
>atapi: 0
>Device type    : Removable CD-ROM
>Version        : 0
>Response Format: 2
>Capabilities   :
>Vendor_info    : 'TEAC    '
>Identifikation : 'DV-W22E         '
>Revision       : 'R.0A'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Current: DVD-RW sequential overwrite
>Profile: DVD-RW sequential overwrite (current)
>Profile: DVD-RW restricted overwrite
>Profile: DVD-R sequential recording
>Profile: DVD-ROM
>Profile: CD-RW
>Profile: CD-R
>Profile: CD-ROM
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
>Drive buf size : 1441792 = 1408 KB
>Current Secsize: 2048
>cdrecord-ProDVD: Input/output error. read track info: scsi sendcmd:
>retryable error
>CDB:  52 00 00 00 00 00 00 00 24 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 00 00 00 00 00 00 00 00 00 00 00
>Sense Key: 0xFFFFFFFF [], Segment 0
>Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
>Sense flags: Blk 0 (not valid)

 EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
       js@cs.tu-berlin.de		(uni)  If you don't have iso-8859-1
       schilling@fokus.fraunhofer.de	(work) chars I am J"org Schilling
 URL:  http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily

Reply to: