Re: problems with xcdroast + ide-scsi
On Mon 17 November 2003 22:50, obarrot wrote:
> Hi, I can't use my CD-ATAPI cdrom with xcdroast + the ide-scsi.o
> module
>
> I had to disable DMA on this CD drive as any operation on the
> device freezed totally the
> machine!
> now I can mount & acccess this /dev/sg1 device ok but readcd does
> detect a garbled disk:
> a music disk instead of a data disk (see below)
>
> any hints?
> thanks
<snip>
Random thoughts:
- Try getting the latest version of cdrtools, and compile and
install them from source
- From your lsmod output, ide-scsi isn't loaded?
- The error message "Warning: controller returns wrong size for CD
capabilities page." could be due to a firmware bug
- The output from readcd you pasted seems to be fine. Does it read
it correctly?
- xcdroast doesn't seem to detect anything, it just starts cdda2wav.
Although it seems that you snipped some output. Could you try
without XCDRoast? That would give some more legible output as well
as remove a potential source of error
- "DGB10: readtoc: no MMC" seems to say that the drive is not MMC
compliant. If this is an old Goldstar drive, you may need the
gscd.o kernel module.
- How is the drive attached to the system? What kind of mainboard do
you have?
- Does it work without ide-scsi, ie with ide-cd? If so, you could
add the line
options ide-cd ignore=hdx
with hdx the device of your writer, to use the reader with ide-cd
and the writer with ide-scsi. This is not a solution, but may be a
workaround.
Lourens
--
GPG public key: http://home.student.utwente.nl/l.e.veen/lourens.key
Reply to: