DVD recording adventures continued
I'm back with season two and a new recorder: now, the Plextor
708 is where the NEC 1300 used to be. All problems vanished?
No way..
Using growisofs for DVD+R-media works well, at speed 2.4 or speed
8x (Ricoh-4x, Verbatim-4x only work with 4x).
But trying to use cdrecord-proDVD now results in an error when
fixating (see messages -1- below), the medium is not recognized
by any system (see medium status -2-, -3- below).
Going to DVD-R media, I am totally unable to burn any of them.
cdrecord-proDVD says the same as with the NEC (see -4-), but
also dvdrecord and growisofs now refuse to work (-5-, -6-).
Summary: Cannot record to DVD-R, can record to DVD+R only with
growisofs. At least, the latter seems to work quite well.
Again, am thankful for any ideas, will try out one or another thing,
especially regarding DVD-R media.
Florian Lindauer
--- error messages:
*** 1 *** cdrecord-prodvd / +R:
...
Max brk space used 7204
2026096 extents written (3957 Mb)
Track 01: 3957 MB written (fifo 100%) [buf 88%] 8.1x.
Track 01: Total bytes read/written: 4149444608/4149444608 (2026096 sectors).
Writing time: 408.814s
Min drive buffer fill was 51%
Fixating...
./cdrecord-ProDVD: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 01 01 00 00 FF 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 1000s
./cdrecord-ProDVD: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 01 06 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 1000s
Fixating time: 0.100s
./cdrecord-ProDVD: fifo had 65359 puts and 65359 gets.
./cdrecord-ProDVD: fifo was 0 times empty and 12752 times full, min fill was70%
*** 2 *** status plusdvd:
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
cpm: 0
cgms: 0
./cdrecord-ProDVD: Input/output error. read dvd structure: scsi sendcmd: noerror
CDB: AD 00 00 00 00 00 00 00 00 02 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.514s timeout 240s
./cdrecord-ProDVD: Cannot read DVD structure.
./cdrecord-ProDVD: Cannot get disk type.
*** 3 *** status dvd+rw-mediainfo:
INQUIRY: [PLEXTOR ][DVDR PX-708A ][1.02]
GET [CURRENT] CONFIGURATION:
Mounted Media: 1Bh, DVD+R
READ DVD STRUCTURE[#11h]:
Current Write Speed: 4.0x1385=5540KB/s
Write Speed #0: 8.0x1385=11080KB/s
Write Speed #1: 4.0x1385=5540KB/s
Write Speed #2: 2.4x1385=3324KB/s
- [unable to READ DVD STRUCTURE#0 (52400)]
READ DISC INFORMATION:
Disc status: appendable
Number of Sessions: 1
State of Last Session: incomplete
"Next" Track: 1
Number of Tracks: 1
READ TRACK INFORMATION[#1]:
Track State: partial
Track Start Address: 0*2KB
Free Blocks: 0*2KB
Track Size: 3163741*2KB
FABRICATED TOC:
Track#1 : 17@0
Track#AA : 17@2026096
Multi-session Info: #1@0
*** 4 *** cdrecord-plusdvd / -R:
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
./cdrecord-ProDVD: VTrack 0 has unknown length.
./cdrecord-ProDVD: Cannot open next track.
Writing time: 0.006s
*** 5 *** dvdrecord / -R:
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 166
Track 01: 0 MB written.dvdrecord: Input/output error. write_g1: scsi
sendcmd:
no error
CDB: 2A 00 00 00 00 A6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching
qua
lifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 5.010s
Fixating...
Fixating time: 0.000s
dvdrecord: fifo had 64 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
*** 6 *** growisofs / -R:
/dev/scd0: "Current Write Speed" is 4.0x1385KBps.
:-[ LBA=0h, SENSE KEY=5h/ASC=21h/ASCQ=02h ]
:-( write failed: Input/output error
*** further info ***
No kind of errors in /var/log/messages this time.
hdparm: /dev/hdc:
HDIO_GET_MULTCOUNT failed: Invalid argument
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
BLKRAGET failed: Invalid argument
HDIO_GETGEO failed: Invalid argument
*** ruined medium
By my own fault, ruined a medium by stopping recording just at the
beginning of growisofs - but it obviously had already started too far.
Now it says:
:-[ LBA=0h, SENSE KEY=5h/ASC=24h/ASCQ=00h ]
:-( write failed: Input/output error
With -M: unable to pread64(2) primary volume descriptor
Any chance this medium can be used after this?
Reply to: