hi have a dell TL2000 tape device, it has an autochanger and two drives.
the problem i'm facing is that when i restart the tape, the device names could change, so my bacula config becomes unusable.
i read somewhere that i can make persistent names with udev rules, but i cant find any example.
developer@w3:/lib/udev/rules.d$ cat /proc/scsi/scsi
Attached devices:
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: TSSTcorp Model: DVD+-RW SN-208BB Rev: D150
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 32 Lun: 00
Vendor: DP Model: BP12G+ Rev: 1.00
Type: Enclosure ANSI SCSI revision: 05
Host: scsi6 Channel: 02 Id: 00 Lun: 00
Vendor: DELL Model: PERC H310 Rev: 2.12
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi7 Channel: 00 Id: 04 Lun: 00
Vendor: IBM Model: ULT3580-HH5 Rev: BBNF
Type: Sequential-Access ANSI SCSI revision: 06
Host: scsi7 Channel: 00 Id: 04 Lun: 01
Vendor: IBM Model: 3573-TL Rev: B.20
Type: Medium Changer ANSI SCSI revision: 05
Host: scsi7 Channel: 00 Id: 05 Lun: 00
Vendor: IBM Model: ULT3580-HH5 Rev: BBNF
Type: Sequential-Access ANSI SCSI revision: 06
thanks in advance.