Re: wicd with WPA2 fails
On Thursday 15 July 2010 03:39:56 Paul Scott wrote:
> sid fully updated
>
> wicd connects fine if I turn wireless security on the WRT54G2 router
> off. When I set the router to WPA2 - AES I get (from wicd.log)
>
> 2010/07/14 17:40:41 :: iwconfig eth2
> 2010/07/14 17:40:41 :: WPA_CLI RESULT IS SCANNING
> 2010/07/14 17:40:42 :: wpa_supplicant authentication may have failed.
> 2010/07/14 17:40:42 :: connect result is Failed
> 2010/07/14 17:40:42 :: exiting connection thread
> 2010/07/14 17:40:43 :: Sending connection attempt result bad_pass
> 2010/07/14 17:40:43 :: ifconfig eth0
> 2010/07/14 17:40:43 :: ifconfig eth2
> 2010/07/14 17:40:43 :: Forced disconnect on
> 2010/07/14 17:40:43 :: attempting to set hostname with dhclient
> 2010/07/14 17:40:43 :: using dhcpcd or another supported client may work
> better
>
>
> TIA for any help,
>
> Paul Scott
Try removing network-manager
Thierry
Reply to: