Re: ide: failed opcode was: unknown
Alexandru Cardaniuc wrote:
> hda: task_in_intr: error=0x40 { UncorrectableError }, LBAsect=14410238,
> end_request: I/O error, dev hda, sector 14410238
> end_request: I/O error, dev hda, sector 14410238
> end_request: I/O error, dev hda, sector 14410238
Do you see a pattern? That looks like a sick drive, getting stuck.
Run "badblocks" on it, see if there are any bad sectors.
Install smartmontools, run "smartctl -l selftest -t long /dev/hda" and
about 15 minutes later, "smartctl -HA /dev/hda | lpr".
It should say "PASSED" and nothing but a - in the "WHEN_FAILED" column.
Anything there next to "Pre-fail" supposedly means 24 hours to failure.
Look at the columns of numbers and see if anything in "WORST" approaches
"THRESH". Low numbers are bad.
Reply to: