cdrdao not working - still ??
Using 2.6.7; I still try to get cdrdao into burning .bin and .cue
The writer is okay (xcdroast works; from user accounts as well);
but cdrdao segfaults whenever it is called:
cdrdao write --device 0,0,0 Monty_SD2.cue
Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.8'
0,0,0: HL-DT-ST RW/DVD GCC-4241N Rev: A101
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
WARNING: Unit not ready, still trying...
WARNING: Unit not ready, still trying...
Burning entire 74 mins disc.
Starting write at speed 4...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Turning BURN-Proof on
Executing power calibration...
Power calibration successful.
Segmentation fault
Always reproducible.
28 Dec 2003 someone suggested to use cdrecord with -dao instead; but also
this fails me:
cdrecord dev=0,0,0 -dao -useinfo cuefile=Monty_SD2.cue
Cdrecord-Clone 2.01a29 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.31
Using libscg version 'schily-0.8'.
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4241N'
Revision : 'A101'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.103s timeout 200s
write track pad data: error after 0 bytes
BFree: 1605 K BSize: 1605 K
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.103s timeout 200s
write track data: error after 0 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Any hint welcome,
Uwe
Reply to: