PPP
Hello.I have a problem and i was wondering if you can help me...
i want to set up point to point between two computers with two modems
over an isdn line but something is wrong...
here are the results...
--
Serial connection established.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS1
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 552> <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <mru 552> <asyncmap 0x0> <pcomp> <accomp>]
sent [IPCP ConfReq id=0x1 <addr 10.10.10.11> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [IPCP ConfReq id=0x1 <addr 10.10.10.11> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x1 <addr 10.10.10.10>]
rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [IPCP ConfNak id=0x1 <addr 10.10.10.10>]
sent [IPCP ConfReq id=0x2 <addr 10.10.10.11> <compress VJ 0f 01>]
rcvd [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Deflate (15) compression enabled
rcvd [IPCP ConfReq id=0x2 <addr 10.10.10.11> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x2 <addr 10.10.10.10>]
rcvd [IPCP ConfNak id=0x2 <addr 10.10.10.10>]
sent [IPCP ConfReq id=0x3 <addr 10.10.10.11> <compress VJ 0f 01>]
rcvd [IPCP ConfReq id=0x3 <addr 10.10.10.11> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x3 <addr 10.10.10.10>]
rcvd [IPCP ConfNak id=0x3 <addr 10.10.10.10>]
sent [IPCP ConfReq id=0x4 <addr 10.10.10.11> <compress VJ 0f 01>]
rcvd [IPCP ConfReq id=0x4 <addr 10.10.10.11> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x4 <addr 10.10.10.10>]
rcvd [IPCP ConfNak id=0x4 <addr 10.10.10.10>]
sent [IPCP ConfReq id=0x5 <addr 10.10.10.11> <compress VJ 0f 01>]
rcvd [IPCP ConfReq id=0x5 <addr 10.10.10.11> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x5 <addr 10.10.10.10>]
rcvd [IPCP ConfNak id=0x5 <addr 10.10.10.10>]
sent [IPCP ConfReq id=0x6 <addr 10.10.10.11> <compress VJ 0f 01>]
rcvd [IPCP ConfReq id=0x6 <addr 10.10.10.11> <compress VJ 0f 01>]
sent [IPCP ConfRej id=0x6 <addr 10.10.10.11>]
rcvd [IPCP ConfRej id=0x6 <addr 10.10.10.11>]
sent [IPCP ConfReq id=0x7 <addrs 10.10.10.11 10.10.10.10> <compress VJ 0f
01>]
rcvd [IPCP ConfReq id=0x7 <addrs 10.10.10.11 10.10.10.10> <compress VJ 0f
01>]
sent [IPCP ConfRej id=0x7 <addrs 10.10.10.11 10.10.10.10>]
rcvd [IPCP ConfRej id=0x7 <addrs 10.10.10.11 10.10.10.10>]
sent [IPCP ConfReq id=0x8 <compress VJ 0f 01>]
rcvd [IPCP ConfReq id=0x8 <compress VJ 0f 01>]
sent [IPCP ConfAck id=0x8 <compress VJ 0f 01>]
rcvd [IPCP ConfAck id=0x8 <compress VJ 0f 01>]
Cannot determine ethernet address for proxy ARP <---- possible problem?
local IP address 10.10.10.11
remote IP address 10.10.10.10
Script /etc/ppp/ip-up started (pid 1750)
Script /etc/ppp/ip-up finished (pid 1750), status = 0x0
--
that happens after i execute the fillowing script
--
exec /usr/sbin/pppd modem debug -detach lock crtscts /dev/ttyS1 \
57600 asyncmap 0 \
nomagic connect "exec /usr/sbin/chat -v \
TIMEOUT 3 \
ABORT '\nBUSY\r' \
ABORT '\nNO CARRIER \r' \
'' \rAT \
'' \rATX3 '' \rAT '' \rAT\&F \
'OK-+++\c-OK' ATH0 \
TIMEOUT 30 \
OK ATDI0810391330 \
CONNECT '' \
ogin:--ogin: pppuser \
ssword: ass"
--
my /etc/ppp/options at the client-->
lock
asyncmap 0
mtu 552
mru 552
modem
/dev/ttyS1
netmask 255.255.255.0
10.10.10.11:10.10.10.10
proxyarp
defaultroute
crtscts
debug
-detach
and almost the same at the server with 'passive' among them...
no auth no pap no chap just normal login without authentification that is
so i guess i am connected right???
also with ifconfig i see
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.10.10.11 P-t-P:10.10.10.10 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:552 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:240 (240.0 b) TX bytes:240 (240.0 b)
question:does the NOARP in line 3 mean something...
apart that..
/sbin/route :
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.10.10.10 * 255.255.255.255 UH 0 0 0 ppp0
default 10.10.10.10 0.0.0.0 UG 0 0 0 ppp0
so in the end i'm all happy and stuff and i try to ping the remote host
... but nothing....silence from the other side....also i try telnet,
ftp...ping another host through the remote host but nothing...i juct can't
'see' the remote host...?
any ideassssssssss????????????????????????i'm desparate........
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: