Re: Proplem mit GCC
Michael Schmitt schrieb:
Am Sun, 29 Sep 2013 01:08:58 +0200
schrieb Ralf Lehmeier <r.lehmeier@freenet.de>:
Manfred Schmitt schrieb:
Ralf Lehmeier schrieb:
Entpacken von gcc-4.7 (aus .../gcc-4.7_4.7.2-5_amd64.deb) ...
dpkg-deb (Unterprozess): Archiv-Element wird dekomprimiert:
interner gzip-Lesefehler: »<fd:4>: incorrect data check«
Wenn apt-get clean, also das loeschen der schon heruntergeladenen
debs, nicht hilft koennte das noch ein angeditschtes Dateisystem
oder auch ein Hardware-Problem sein.
Wenn Du nicht gleich komplett aufraeumen willst kannst Du auch erst
einmal nur /var/cache/apt/archives/gcc-4.7_4.7.2-5_amd64.deb
loeschen.
Danke für deine Hilfe. Das System läuft nach einem Neustart wieder.
Nur das Samba spinnt - aber das kriege ich auch noch hin.
Ehm... nach nem reboot ließ sich gcc installieren, davor aber nicht?
Und Du hast sonst *keinerlei* Veränderungen am System vorgenommen?
Poste mal die Ausgaben von
cat /proc/mdstat
cat /sys/block/md?/md/mismatch_cnt
ich vermute übles. Das würde u.U. auch das eine oder andere Problem was
wir hatten als nicht mehr ganz so merkwürdig erscheinen lassen. Und
wenn wir da grad dabei sind, poste auch mal die Ausgaben von je
smartctl -a /dev/sdX
wobei "X" eben a, b, c, ... die verschiedenen
Platten in Deinem System sind. Und der fsck beim nächsten reboot,
förderte der *irgendwelche* Fehler zu Tage?
Bis auf den Drucker läuft der Rechner im Moment gut.
Trotzdem gebe ich dir mal die Daten.
MfG R.Lehmeier
cat /proc/mdstat
Personalities : [raid1]
md3 : active raid1 sda4[0] sdb4[1]
457619456 blocks [2/2] [UU]
md2 : active raid1 sda3[0] sdb3[1]
27342528 blocks [2/2] [UU]
md1 : active raid1 sda2[0] sdb2[1]
489856 blocks [2/2] [UU]
md0 : active raid1 sda1[0] sdb1[1]
2931712 blocks [2/2] [UU]
unused devices: <none>
cat /sys/block/md?/md/mismatch_cnt
0
0
0
0
smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166
Device Model: SAMSUNG HD501LJ
Serial Number: S0VVJ1KP306861
LU WWN Device Id: 5 0000f0 01b306861
Firmware Version: CR100-10
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Tue Oct 1 18:40:09 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 8887) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 152) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail
Always - 1
3 Spin_Up_Time 0x0007 100 100 015 Pre-fail
Always - 7680
4 Start_Stop_Count 0x0032 097 097 000 Old_age
Always - 3368
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail
Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 13357
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0012 253 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age
Always - 1830
187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always
- 0
188 Command_Timeout 0x0032 253 253 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 058 051 000 Old_age Always
- 42
194 Temperature_Celsius 0x0022 112 091 000 Old_age Always
- 42
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 23995327
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Total_Pending_Sectors 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always
- 0
202 Data_Address_Mark_Errs 0x0032 100 100 000 Old_age Always
- 3
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13335
-
# 2 Abort offline test Aborted by host 90% 13014
-
# 3 Short offline Completed without error 00% 10171
-
# 4 Short offline Completed without error 00% 8997
-
# 5 Extended offline Completed without error 00% 1001
-
# 6 Short captive Completed without error 00% 6
-
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166
Device Model: SAMSUNG HD501LJ
Serial Number: S0MUJ1PP485791
LU WWN Device Id: 5 0000f0 01b485791
Firmware Version: CR100-10
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Tue Oct 1 18:43:33 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 8849) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 151) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 100 100 015 Pre-fail
Always - 7680
4 Start_Stop_Count 0x0032 097 097 000 Old_age
Always - 3361
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail
Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 13417
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age
Always - 1824
187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always
- 0
188 Command_Timeout 0x0032 253 253 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 059 052 000 Old_age Always
- 41
194 Temperature_Celsius 0x0022 115 094 000 Old_age Always
- 41
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 23330789
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Total_Pending_Sectors 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always
- 0
202 Data_Address_Mark_Errs 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_errorsmartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166
Device Model: SAMSUNG HD501LJ
Serial Number: S0MUJ1PP485791
LU WWN Device Id: 5 0000f0 01b485791
Firmware Version: CR100-10
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Tue Oct 1 18:43:33 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 8849) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 151) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 100 100 015 Pre-fail
Always - 7680
4 Start_Stop_Count 0x0032 097 097 000 Old_age
Always - 3361
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail
Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 13417
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age
Always - 1824
187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always
- 0
188 Command_Timeout 0x0032 253 253 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 059 052 000 Old_age Always
- 41
194 Temperature_Celsius 0x0022 115 094 000 Old_age Always
- 41
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 23330789
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Total_Pending_Sectors 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always
- 0
202 Data_Address_Mark_Errs 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13395
-
# 2 Abort offline test Aborted by host 90% 11770
-
# 3 Short offline Completed without error 00% 1090
-
# 4 Short offline Completed without error 00% 1090
-
# 5 Extended offline Interrupted (host reset) 90% 1077
-
# 6 Extended offline Interrupted (host reset) 90% 1068
-
# 7 Extended offline Completed without error 00% 1062
-
# 8 Short captive Completed without error 00% 17
-
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testingsmartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint T166
Device Model: SAMSUNG HD501LJ
Serial Number: S0MUJ1PP485791
LU WWN Device Id: 5 0000f0 01b485791
Firmware Version: CR100-10
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Tue Oct 1 18:43:33 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 8849) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 151) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 100 100 015 Pre-fail
Always - 7680
4 Start_Stop_Count 0x0032 097 097 000 Old_age
Always - 3361
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail
Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 13417
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age
Always - 1824
187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always
- 0
188 Command_Timeout 0x0032 253 253 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 059 052 000 Old_age Always
- 41
194 Temperature_Celsius 0x0022 115 094 000 Old_age Always
- 41
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 23330789
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Total_Pending_Sectors 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always
- 0
202 Data_Address_Mark_Errs 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13395
-
# 2 Abort offline test Aborted by host 90% 11770
-
# 3 Short offline Completed without error 00% 1090
-
# 4 Short offline Completed without error 00% 1090
-
# 5 Extended offline Interrupted (host reset) 90% 1077
-
# 6 Extended offline Interrupted (host reset) 90% 1068
-
# 7 Extended offline Completed without error 00% 1062
-
# 8 Short captive Completed without error 00% 17
-
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
# 1 Short offline Completed without error 00% 13395
-
# 2 Abort offline test Aborted by host 90% 11770
-
# 3 Short offline Completed without error 00% 1090
-
# 4 Short offline Completed without error 00% 1090
-
# 5 Extended offline Interrupted (host reset) 90% 1077
-
# 6 Extended offline Interrupted (host reset) 90% 1068
-
# 7 Extended offline Completed without error 00% 1062
-
# 8 Short captive Completed without error 00% 17
-
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: