Re: smart Failed die 2.
Martin Reising schrieb:
On Thu, Mar 20, 2008 at 12:50:47PM +0100, Ralf Lehmeier wrote:
Beim Start kommt immer in roter Schrift "Smartd failed".
# List of devices you want to explicitly enable S.M.A.R.T. for
# Not needed (and not recommended) if the device is monitored by smartd
#enable_smart="/dev/sda /dev/sdb "
Warum willst du SMART nicht für /dev/sda und /dev/sdb aktivieren?
less /etc/init.d/smartmontools und man smartctl legen es doch IMHO
nahe es mal zu versuchen.
Entschuldigt das ich leider erst jetzt dazu komme mich zu melden.
Ich habe jetzt in /etc/smart.conf folgende Einträge:
/dev/sda -d ata -a -H -l error -o on -S on \
-I 194 -I 231 -I 9 \
-m r.lehmeier@freenet.de -l error \
-M daily
/dev/sdb -d ata -a -H -l error -o on -S on \
-I 194 -I 231 -I 9 \
-m r.lehmeier@freenet.de -l error \
-M daily
und in der /etc(default/smartmontools :
enable_smart="/dev/sda -d ata /dev/sdb -d ata
start_smartd=yes
Mache ich nun ein smartd -q onecheck in der Konsole
bekomme ich folgende Meldungen:
smartd version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Opened configuration file /etc/smartd.conf
Configuration file /etc/smartd.conf parsed.
Device: /dev/sda, opened
Device: /dev/sda, found in smartd database.
Error SMART Enable Auto-save failed: Input/output error
Device: /dev/sda, could not enable SMART Attribute Autosave.
Error SMART Enable Automatic Offline failed: Input/output error
Device: /dev/sda, enable SMART Automatic Offline Testing failed.
Device: /dev/sda, is SMART capable. Adding to "monitor" list.
Device: /dev/sdb, opened
Device: /dev/sdb, found in smartd database.
Error SMART Enable Auto-save failed: Input/output error
Device: /dev/sdb, could not enable SMART Attribute Autosave.
Error SMART Enable Automatic Offline failed: Input/output error
Device: /dev/sdb, enable SMART Automatic Offline Testing failed.
Device: /dev/sdb, is SMART capable. Adding to "monitor" list.
Monitoring 2 ATA and 0 SCSI devices
Started with '-q onecheck' option. All devices sucessfully checked once.
smartd is exiting (exit status 0)
hierbei sind mir aber die Meldungen
Error SMART Enable Auto-save failed: Input/output error
und
Error SMART Enable Automatic Offline failed: Input/output error
ein Dorn im Auge weil ich nicht weiß wie ich sie beseitigen kann und wie
ich sie bewerten soll.
Ausserdem, wenn ich die Smartmontools am laufen habe möchte ich gern
einmal am Tag eine Mail bekommen aus der ich den zustand der Platten
entnehmen kann. Wie bekomme ich es hin.
Ich würde es gern einmal ausprobieren indem Smartmontools mir eine Mail
schickt auch wenn sie in Ordnung sind und später dann nur noch bei
eventuellen Defekten.
Im Moment klappt die E-Mail Zustellung leider gar nicht.
Danke für eure Geduld.
MfG R.Lehmeier
P.S:
Auch ein smartctl -a /dev/sda -d ata gelingt für sda und sdb gelingt auf
der Konsole
hier mal die Ausgabe für sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD501LJ
Serial Number: S0VVJ1KP306861
Firmware Version: CR100-10
User Capacity: 500.107.862.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Not recognized. Minor revision code: 0x52
Local Time is: Thu Mar 27 12:53:27 2008 CET
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for
details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: (8887) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 152) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 100 100 015 Pre-fail
Always - 7488
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 302
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail
Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 1022
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 222
187 Unknown_Attribute 0x0032 253 253 000 Old_age Always
- 0
188 Unknown_Attribute 0x0032 253 253 000 Old_age Always
- 0
190 Unknown_Attribute 0x0022 078 055 000 Old_age Always
- 22
194 Temperature_Celsius 0x0022 172 103 000 Old_age Always
- 22
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 5228367
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always
- 0
202 TA_Increase_Count 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1001
-
# 2 Short captive Completed without error 00% 6
-
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data
structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: