Re: WPA mit Cisco Karte und Linksys WRT54G
ja hallo erstma,...
Am Dienstag, 20. September 2005 23:29 schrieb Thomas Letzner:
> Hallo
>
> da mir WEP mittlerweile echt zu unsicher geworden ist habe ich
> überlegt und bin dabei auf WPA gestoßen, zunächst einmal möchte ich
> darstellen wie ich den Router eingerichtet habe. Da ich die Karte
> nicht passend konfiguriert bekomme.
> Die Firmwaere auf dem WRT ist die von Sveasoft, unter
> Wireless/Security habe folgendes eingestellt:
> Security Mode: WPA Pre-Shared Key
> WPA Algorithms: TKIP+AES
> WPA Shared Key: ***Passwort im plaintext***
> Group Key Renewal: 3600 Seconds
>
> Auf dem Notebook habe ich folgende wpa_supplicant.conf:
>
> ctrl_interface=/var/run/wpa_supplicant
> network={
> ssid="dweeb"
> #psk="***Passwort im plaintext***"
> psk=***Passwort im hexformat***
> }
Ok, bei mir steht dort:
network={
ssid="jan_luehr"
psk="Kennwort_im_Klartext"
priority=5
}
> Zum testen habe ich wpa_supplicant nicht daemon gestartet und zwar mit
> diesem Befehl:
> wpa_supplicant -w -i eth1 -c /etc/wpa_supplicant.conf -Dipw -d -t
ich schreib zwar immer -D ipw, aber auch egal. Du hast einen Centrino?
> Das Ergebnis ist folgendes:
> root@mobil:/home/thomas # wpa_supplicant -w -i eth1 -c
> /etc/wpa_supplicant.conf -Dipw -d -t
> Sep 20 23:22:21.270436: Initializing interface 'eth1' conf
> '/etc/wpa_supplicant.conf' driver 'ipw'
> Sep 20 23:22:21.270603: Configuration file '/etc/wpa_supplicant.conf'
> -> '/etc/wpa_supplicant.conf'
> Sep 20 23:22:21.270636: Reading configuration file
> '/etc/wpa_supplicant.conf'
> Sep 20 23:22:21.270691: ctrl_interface='/var/run/wpa_supplicant'
> Sep 20 23:22:21.270741: Priority group 0
> Sep 20 23:22:21.270766: id=0 ssid='dweeb'
> Sep 20 23:22:21.270790: Initializing interface (2) 'eth1'
> Sep 20 23:22:21.280006: EAPOL: SUPP_PAE entering state DISCONNECTED
> Sep 20 23:22:21.280107: EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> Sep 20 23:22:21.280182: EAPOL: SUPP_BE entering state INITIALIZE
> Sep 20 23:22:21.280258: EAP: EAP entering state DISABLED
> Sep 20 23:22:21.280386: EAPOL: External notification - portEnabled=0
> Sep 20 23:22:21.280485: EAPOL: External notification - portValid=0
> Sep 20 23:22:21.280593: wpa_driver_ipw_init is called
Das sieht für mich nach einem WPA-Radius aus... da bin ich mir aber gerade
nicht so sicher.
> Sep 20 23:22:21.304586: Own MAC address: 00:09:43:f9:22:54
> Sep 20 23:22:21.304703: wpa_driver_ipw_set_wpa: enabled=1
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Sep 20 23:22:21.304930: wpa_driver_ipw_set_key: alg=none key_idx=0
> set_tx=0 seq_len=0 key_len=0
> ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
> Sep 20 23:22:21.305095: Failed to set encryption.
Treiber richtig gebaut? Welche Version?
>
> Ich schließe daraus, dass das Netzwerk dweeb offensichtlich gefunden
> wird dieses aber entgegen der Einstellungen im Router nicht mit WPA
> arbeitet oder?
> Kann mir jemand daraus sagen wo es hakt?
Wie gut ist der Empfang? Klappt eine Verbindung mit Windows oder anderen
Rechner?
Keep smiling
yanosu
Reply to: