[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

WLAN, Netzwerk



Erstmal Danke für eure Antworten. Bin leider noch keinen Schritt weiter gekommen.

Habe die Fehlermeldung mal vollständig rausgezogen:

	scsi	[success]
done.

Configuring network interfaces...Error for wireless request "Set Mode" (8B06)
	SET failed on device eth1 : No such device
Error for wireless request "Set ESSID" (8B1A) :
	SET failed on device eth1 : No such device
SIOCSIFADdR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
eth1: ERROR while getting interface flags: No such device
eth1: ERROR while getting interface flags: No such device
Failed to bring up eth1.
done.

Starting potmap deamon: portmap

In der /etc/network/interfaces kann ich bezüglich wireless_essid keinen Fehler finden (leicht geändert):

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth1
iface eth1 inet static
	address xx.xx.0.92
	netmask 255.255.0.0
	network xx.xx.0.0
	broadcast xx.xx.255.255
	wireless_essid BDE-POINT
	wireless_mode managed

# The secondary network interfaces
auto eth0
iface eth0 inet static
	address xx.xx.0.92
	netmask 255.255.0.0
	network xx.xx.0.0
	broadcast xx.xx.255.255
	gateway xx.xx.0.160
	# dns-* options are implemented by the resolvconf package, if installed
	dns-nameservers xx.xx.0.160
	dns-search trasslux

iwconfig bringt Folgendes:

eth1      IEEE 802.11-DS  ESSID:"BDE-POINT"  Nickname:"HERMES I"
Mode:Managed Frequency:2.457 GHz Access Point: 44:44:44:44:44:44
          Bit Rate:2 Mb/s   Tx-Power=15 dBm   Sensitivity:1/3
          Retry limit:4   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=0/92  Signal level=134/153  Noise level=134/153
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Allerdings habe ich mehrfach den Nickname entfernt und er wird immer wieder gesetzt.

ifconfig bringt Folgendes:

eth0      Protokoll:Ethernet  Hardware Adresse vv:vv:vv:65:7E:D5
          inet Adresse:xx.xx.0.92  Bcast:xx.xx.255.255 Maske:255.255.0.0
inet6 Adresse: fe80::210:dcff:fe65:7ed5/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:89 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:0 (0.0 b)  TX bytes:3906 (3.8 KiB)

eth1      Protokoll:Ethernet  Hardware Adresse vv:vv:vv:50:2C:F3
          inet Adresse:xx.xx.0.92  Bcast:xx.xx.255.255  Maske:255.255.0.0
inet6 Adresse: fe80::202:2dff:fe50:2cf3/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:5 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:9 Basisadresse:0x100

lo        Protokoll:Lokale Schleife
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:209 errors:0 dropped:0 overruns:0 frame:0
          TX packets:209 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0
          RX bytes:15309 (14.9 KiB)  TX bytes:15309 (14.9 KiB)

Und im Verzeichnis /etc/rc2.d/ findet sich Folgendes:

insgesamt 0
lrwxrwxrwx 1 root root 18 2005-06-16 17:19 S10sysklogd -> ../init.d/sysklogd
lrwxrwxrwx  1 root root 15 2005-06-16 17:19 S11klogd -> ../init.d/klogd
lrwxrwxrwx  1 root root 13 2005-06-16 17:19 S14ppp -> ../init.d/ppp
lrwxrwxrwx  1 root root 17 2005-06-16 16:05 S18portmap -> ../init.d/portmap
lrwxrwxrwx  1 root root 16 2005-06-16 16:06 S20cupsys -> ../init.d/cupsys
lrwxrwxrwx  1 root root 16 2005-06-17 08:40 S20dbus-1 -> ../init.d/dbus-1
lrwxrwxrwx  1 root root 17 2005-06-17 08:39 S20dirmngr -> ../init.d/dirmngr
lrwxrwxrwx  1 root root 15 2005-06-16 17:19 S20exim4 -> ../init.d/exim4
lrwxrwxrwx  1 root root 13 2005-06-16 16:06 S20fam -> ../init.d/fam
lrwxrwxrwx  1 root root 15 2005-06-16 17:18 S20inetd -> ../init.d/inetd
lrwxrwxrwx  1 root root 17 2005-06-16 17:18 S20makedev -> ../init.d/makedev
lrwxrwxrwx  1 root root 16 2005-06-16 17:20 S20pcmcia -> ../init.d/pcmcia
lrwxrwxrwx  1 root root 13 2005-06-16 16:05 S20ssh -> ../init.d/ssh
lrwxrwxrwx  1 root root 13 2005-06-17 12:55 S20xfs -> ../init.d/xfs
lrwxrwxrwx  1 root root 16 2005-06-16 16:13 S20xprint -> ../init.d/xprint
lrwxrwxrwx 1 root root 20 2005-06-16 16:05 S21nfs-common -> ../init.d/nfs-common
lrwxrwxrwx  1 root root 13 2005-06-16 17:19 S89atd -> ../init.d/atd
lrwxrwxrwx  1 root root 14 2005-06-16 17:18 S89cron -> ../init.d/cron
lrwxrwxrwx  1 root root 13 2005-06-17 09:02 S99kdm -> ../init.d/kdm
lrwxrwxrwx 1 root root 19 2005-06-16 17:18 S99rmnologin -> ../init.d/rmnologin lrwxrwxrwx 1 root root 23 2005-06-16 17:18 S99stop-bootlogd -> ../init.d/stop-bootlogd

Kann einfach keinen Fehler finden. Hab' nen anderen Rechner - abgesehen von den IP-Adressen - genau so konfiguriert und keine Probleme damit.

Hat jemand noch nen Tipp?

Gruß
Heiko



Reply to: