I am rebuilding my SS20 with Debian Sparc. When I build a
2.4.18-pre9 kernel from CVS, everything goes OK during the compile.
When I try to boot the kernel, it just halts at init.
I've included the bootup messages below.
The machine with this booting problem is dual Ross 150 CPU's, PROM
2.25, and 384 MB RAM.
I compiled the kernel as SMP but haven't tried UP yet.
I have another SS20 that is dual SM71 CPU's, PROM 2.22 and 192 MB RAM
and the exact same kernels that stop at init on the first machine work
fine on this one.
Does anybody have this problem or any ideas how to fix it?
Uncompressing image...
PROMLIB: obio_ranges 5
bootmem_init: Scan sp_banks,
init_bootmem(spfn[24b],bpfn[24b],mlpfn[c000])
free_bootmem: base[0] size[c000000]
reserve_bootmem: base[0] size[24b000]
reserve_bootmem: base[24b000] size[1800]
Booting Linux...
mem_init: Calling free_all_bootmem().
PROMLIB: Sun Boot Prom Version 3 Revision 2
Linux version 2.4.18-pre9 (root@ludwig) (gcc version 2.95.4 20011002 (Debian pre release)) #1 SMP Mon Feb 11 21:24:56 PST 2002
ARCH: SUN4M
TYPE: Sun4m SparcStation10/20
Ethernet address: 8:0:20:78:ff:e3
SRMMU: Using VAC size of 524288 bytes, line size 32 bytes.
Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz). Patching kernel for srmmu[ROSS HyperSparc]/iommu
49037MB HIGHMEM available.
On node 0 totalpages: 97600
zone(0): 49152 pages.
zone(1): 0 pages.
zone(2): 81806 pages.
Found CPU 0 <node=ffd70150,mid=8>
Found CPU 1 <node=ffd703a0,mid=10>
Found 2 CPU prom device tree node(s).
Power off control detected.
Kernel command line: root=/dev/sda2 ro
Calibrating delay loop... 149.50 BogoMIPS
Memory: 380588k available (1560k kernel code, 316k data, 112k init, 196148k highmem) [f0000000,1ff8e000]
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
POSIX conformance testing by UNIFIX
Entering SMP Mode...
Starting CPU 1 at f01e1c64
Calibrating delay loop... 149.91 BogoMIPS
Total of 2 Processors activated (299.41 BogoMIPS).
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
IOMMU: impl 1 vers 3 page table at fbf00000 of size 262144 bytes
sbus0: Clock 25.0 MHz
dma0: Revision 2
dma1: Revision 2
Sparc Zilog8530 serial driver version 1.68.2.2
Sun Mouse-Systems mouse driver version 1.00
tty00 at 0xffede004 (irq = 44) is a Zilog8530
tty01 at 0xffede000 (irq = 44) is a Zilog8530
tty02 at 0xffedb004 (irq = 44) is a Zilog8530
tty03 at 0xffedb000 (irq = 44) is a Zilog8530
keyboard: not present
Console: ttyS0 (Zilog8530)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Floppy drive(s): fd0 is 1.44M
ioremap: done with statics, switching to malloc
FDC 0 is a National Semiconductor PC87306
sunlance.c:v2.00 11/Sep/99 Miguel de Icaza (miguel@nuclecu.unam.mx)
eth0: LANCE 08:00:20:78:ff:e3
eth0: using auto-carrier-detection.
SCSI subsystem driver Revision: 1.00
esp0: IRQ 36 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167
NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP100A-FAST
Vendor: SEAGATE Model: ST32550W SUN2.1G Rev: 0416
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST32550W SUN2.1G Rev: 0416
Type: Direct-Access ANSI SCSI revision: 02
Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1755
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 3, lun 0
esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 4194995 512-byte hdwr sectors (2148 MB)
Partition check:
sda: sda1 sda2 sda3
esp0: target 3 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sdb: 4194995 512-byte hdwr sectors (2148 MB)
sdb: sdb1 sdb2
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
esp0: target 6 asynchronous
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 10922)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 112k freed
Thanks