Re: netatalk does not see a printer
Hello,
I am able to print using netatalk trough an Asante bridge to my HP
LaserJet. The following points might help you :
- your ifconfig does not show that the Ethernet network is "UP", meaning
that it's probably down :-)
I suggest you perform an "ifconfig eth0 up" and see what happens.
- my "getzones" command also times out, but that does not seem to have
any impact on the printing ability. In particular, nbplkup works (so does
printing) both before and after the getzones command.
Let me know if you'd like more information.
Good luck,
LMS
==============================
Laurent Steffan
LaurentSteffan@mac.com
eBusiness Technical Consultant
==============================
Reçu de Alessandro Ghigi le 18/07/02 à 23:24
>Hi.
>
>I have a potato on a laptop with a pcmcia ethernet card, and I am trying
>to connect it to an Apple LaserWriter 4/600 PS, which has a LocalTalk
>connector. I also have an Asantetalk adapter which bridges (or should
>bridge) between ethernet and localtalk.
>
>I have a kernel with appletalk as a loadable module, and have installed
>netatalk. When I start netatalk using the script (after loading
>appletalk.o), it does not complain. Nevertheless the getzones command
>does not work:
>
>root:/etc/init.d# getzones
>atp_rresp: Connection timed out
>
>
>With nbplkup I get the following:
>
>root:/etc/init.d# nbplkup
> caspar:AFPServer
>65280.226:128 caspar:netatalk
> 65280.226:4
> caspar:Workstation 65280.226:4
>
>With ifconfig I get:
>
>root:/home/ghigi# ifconfig eth0
>eth0 Link encap:Ethernet HWaddr 00:50:04:DF:B4:BF
> EtherTalk Phase 2 addr:65280/226
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> Interrupt:11 Base address:0x200
--
To UNSUBSCRIBE, email to debian-powerpc-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: