--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-0.bpo.2-686-pae: error in removable Flash disk on remove files
- From: rpnpif <rpnpif@free.fr>
- Date: Fri, 20 Jul 2012 14:20:20 +0200
- Message-id: <20120720122020.3712.93361.reportbug@chro.home>
Package: src:linux
Version: 3.2.20-1~bpo60+1
Severity: normal
Deleting some files from USB flash storage stick, kernel make error.
Perhaps this is due to a ISO9660 partition in this USB stick.
-- Package-specific info:
** Version:
Linux version 3.2.0-0.bpo.2-686-pae (Debian 3.2.20-1~bpo60+1) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Sat Jun 30 08:29:17 UTC 2012
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 6.687705] Console: switching to colour frame buffer device 128x48
[ 6.704042] fb0: radeondrmfb frame buffer device
[ 6.704046] drm: registered panic notifier
[ 6.704670] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 8.537367] Adding 1052252k swap on /dev/sda3. Priority:-1 extents:1 across:1052252k
[ 8.581901] Adding 511996k swap on /dev/sdb2. Priority:-2 extents:1 across:511996k
[ 8.591884] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 9.189534] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 9.382787] loop: module loaded
[ 9.499856] w83627hf: w83627hf: Found W83627HF chip at 0x290
[ 9.499940] ACPI: resource w83627hf [io 0x0295-0x0296] conflicts with ACPI region HWMT [io 0x295-0x296]
[ 9.499945] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.696654] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 22.822806] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.923067] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 23.053916] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 24.369481] 8139too 0000:00:06.0: eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 25.752788] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.823542] nf_conntrack version 0.5.0 (16158 buckets, 64632 max)
[ 26.114759] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 27.764813] RPC: Registered named UNIX socket transport module.
[ 27.764822] RPC: Registered udp transport module.
[ 27.764826] RPC: Registered tcp transport module.
[ 27.764829] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 27.821343] FS-Cache: Loaded
[ 27.928308] FS-Cache: Netfs 'nfs' registered for caching
[ 27.986124] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 30.007953] via-rhine 0000:00:08.0: eth0: link down
[ 30.008821] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.592070] eth1: no IPv6 routers present
[ 37.133585] lp0: using parport0 (interrupt-driven).
[ 37.149845] ppdev: user-space parallel port driver
[ 81.844604] sshd (3097): /proc/3097/oom_adj is deprecated, please use /proc/3097/oom_score_adj instead.
[ 82.488102] usb 2-1: USB disconnect, device number 2
[ 82.772107] usb 2-1: new low-speed USB device number 3 using uhci_hcd
[ 82.948310] usb 2-1: New USB device found, idVendor=046d, idProduct=c01b
[ 82.948318] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 82.948324] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 82.948328] usb 2-1: Manufacturer: Logitech
[ 82.966334] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:11.2/usb2/2-1/2-1:1.0/input/input6
[ 82.967061] generic-usb 0003:046D:C01B.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-1/input0
[ 102.100057] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 102.238355] usb 1-5: New USB device found, idVendor=1970, idProduct=2606
[ 102.238362] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 102.238368] usb 1-5: Product: NoLimits 4GB
[ 102.238372] usb 1-5: Manufacturer: DaneElec
[ 102.238375] usb 1-5: SerialNumber: XXXXXXXXXXXXXXXXX (hidden)
[ 102.362221] usbcore: registered new interface driver uas
[ 102.383122] Initializing USB Mass Storage driver...
[ 102.383406] scsi2 : usb-storage 1-5:1.0
[ 102.383617] usbcore: registered new interface driver usb-storage
[ 102.383621] USB Mass Storage support registered.
[ 103.382653] scsi 2:0:0:0: Direct-Access DaneElec NoLimits 4GB 1100 PQ: 0 ANSI: 0 CCS
[ 103.387869] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 103.392997] sd 2:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 103.393885] sd 2:0:0:0: [sdc] Write Protect is off
[ 103.393896] sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 103.394733] sd 2:0:0:0: [sdc] No Caching mode page present
[ 103.394744] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 103.407479] sd 2:0:0:0: [sdc] No Caching mode page present
[ 103.407491] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 103.439595] sdc: sdc1 sdc2
[ 103.445453] sd 2:0:0:0: [sdc] No Caching mode page present
[ 103.445462] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 103.445470] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 104.371682] ------------[ cut here ]------------
[ 104.371710] WARNING: at /build/buildd-linux_3.2.20-1~bpo60+1-i386-lJFxR0/linux-3.2.20/block/genhd.c:1573 disk_clear_events+0xa4/0xcd()
[ 104.371716] Hardware name: MS-6380
[ 104.371720] Modules linked in: usb_storage uas snd_hrtimer mperf cpufreq_userspace cpufreq_conservative cpufreq_stats cpufreq_powersave ppdev lp nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc binfmt_misc ipt_REJECT xt_comment ipt_LOG xt_limit xt_tcpudp xt_addrtype xt_state ip6table_filter ip6_tables nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables hwmon_vid loop firewire_sbp2 snd_via82xx snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm radeon snd_page_alloc snd_mpu401_uart snd_seq_midi snd_rawmidi snd_seq_midi_event usbhid hid snd_seq ttm drm_kms_helper snd_timer snd_seq_device drm i2c_algo_bit i2c_viapro i2c_core processor power_supply ns558 via_ircc sg thermal_sys evdev gameport pcspkr firewire_ohci ohci_hcd irda uhci_hcd ehci_hcd sr_mod cdrom firewire_core tpm_tis tpm snd tpm_bios shpchp parport_pc button parport via_rhine crc_ccitt floppy soundcore usbcore usb_common crc_i
tu_t 8139too 8139cp mii ext4 mbcache jbd2 crc16 sd_mod crc_t10dif ata_generic pata_via libata scsi_mod
[ 104.371883] Pid: 3336, comm: udisks-part-id Not tainted 3.2.0-0.bpo.2-686-pae #1
[ 104.371888] Call Trace:
[ 104.371900] [<c103ba05>] ? warn_slowpath_common+0x6a/0x7b
[ 104.371907] [<c11614a0>] ? disk_clear_events+0xa4/0xcd
[ 104.371912] [<c103ba23>] ? warn_slowpath_null+0xd/0x10
[ 104.371918] [<c11614a0>] ? disk_clear_events+0xa4/0xcd
[ 104.371936] [<c10f943c>] ? check_disk_change+0x17/0x45
[ 104.371952] [<f8232460>] ? sd_open+0xc8/0x164 [sd_mod]
[ 104.371959] [<c10fa0e2>] ? __blkdev_get+0x252/0x330
[ 104.371968] [<c10fa35f>] ? blkdev_get+0x19f/0x28d
[ 104.371975] [<c112e3e2>] ? fsnotify_perm+0x4f/0x5a
[ 104.371981] [<c10f98d8>] ? bd_acquire+0x20/0x89
[ 104.371994] [<c10d6546>] ? __dentry_open+0x18b/0x263
[ 104.372001] [<c10d66a1>] ? nameidata_to_filp+0x3a/0x45
[ 104.372006] [<c10fa44d>] ? blkdev_get+0x28d/0x28d
[ 104.372013] [<c10e00db>] ? do_last+0x42a/0x529
[ 104.372021] [<c112d88f>] ? security_file_alloc+0xc/0xd
[ 104.372021] [<c10e0664>] ? path_openat+0x9f/0x294
[ 104.372021] [<c10e08fd>] ? do_filp_open+0x21/0x5d
[ 104.372021] [<c10d5801>] ? do_sys_open+0x58/0xd1
[ 104.372021] [<c10d58be>] ? sys_open+0x1e/0x23
[ 104.372021] [<c12db6df>] ? sysenter_do_call+0x12/0x28
[ 104.372021] ---[ end trace 8354711bd7ff7a65 ]---
[ 104.634617] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 104.761555] mount: sending ioctl 5310 to a partition!
[ 104.761565] mount: sending ioctl 5310 to a partition!
[ 104.763355] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 104.778501] ISO 9660 Extensions: RRIP_1991A
** Model information
not available
** Loaded modules:
nls_utf8
isofs
nls_cp437
vfat
fat
usb_storage
uas
snd_hrtimer
mperf
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
ppdev
lp
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
binfmt_misc
ipt_REJECT
xt_comment
ipt_LOG
xt_limit
xt_tcpudp
xt_addrtype
xt_state
ip6table_filter
ip6_tables
nf_nat_irc
nf_conntrack_irc
nf_nat_ftp
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
hwmon_vid
loop
firewire_sbp2
snd_via82xx
snd_ac97_codec
ac97_bus
snd_pcm_oss
snd_mixer_oss
snd_pcm
radeon
snd_page_alloc
snd_mpu401_uart
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
usbhid
hid
snd_seq
ttm
drm_kms_helper
snd_timer
snd_seq_device
drm
i2c_algo_bit
i2c_viapro
i2c_core
processor
power_supply
ns558
via_ircc
sg
thermal_sys
evdev
gameport
pcspkr
firewire_ohci
ohci_hcd
irda
uhci_hcd
ehci_hcd
sr_mod
cdrom
firewire_core
tpm_tis
tpm
snd
tpm_bios
shpchp
parport_pc
button
parport
via_rhine
crc_ccitt
floppy
soundcore
usbcore
usb_common
crc_itu_t
8139too
8139cp
mii
ext4
mbcache
jbd2
crc16
sd_mod
crc_t10dif
ata_generic
pata_via
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099]
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: cfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: Packard Bell B.V. Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:09.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: Packard Bell B.V. Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:09.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Packard Bell B.V. Device [1631:1600]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dffffd00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited RV100 QY [Sapphire Radeon VE 7000] [174b:7112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at a800 [size=256]
Region 2: Memory at dfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1970:2606 Dane-Elec Corp. USA
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-0.bpo.2-686-pae (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-0.bpo.2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-3.2.0-0.bpo.2-686-pae recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
ii libc6-i686 2.13-33 Embedded GNU C Library: Shared lib
Versions of packages linux-image-3.2.0-0.bpo.2-686-pae suggests:
ii extlinux 2:4.05+dfsg-2~bpo60+1 collection of boot loaders (ext2/3
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.2 <none> (no description available)
Versions of packages linux-image-3.2.0-0.bpo.2-686-pae is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-brcm80211 <none> (no description available)
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
ii firmware-linux 0.35~bpo60+1 Binary firmware for various driver
ii firmware-linux-nonfree 0.35~bpo60+1 Binary firmware for various driver
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.35~bpo60+1 Binary firmware for Ralink wireles
ii firmware-realtek 0.35~bpo60+1 Binary firmware for Realtek wired
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.2.0-0.bpo.2-686-pae/prerm/removing-running-kernel-3.2.0-0.bpo.2-686-pae: true
linux-image-3.2.0-0.bpo.2-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-0.bpo.2-686-pae/postinst/missing-firmware-3.2.0-0.bpo.2-686-pae:
linux-image-3.2.0-0.bpo.2-686-pae/postinst/depmod-error-initrd-3.2.0-0.bpo.2-686-pae: false
--- End Message ---