Intel D410PT (ABACO COMPUTERS)
Salve a tutti,
ho acquistato un PC con la scheda madre in oggetto, ho installato debian
ma non c'è verso di avere l'interfaccia grafica.
Quando parte GDM il monitor diventa nero e tra i log trovo:
(II) VESA(0): initializing int10
(WW) VESA(0): Bad V_BIOS checksum
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8128 kB
(II) VESA(0): VESA VBE OEM: Intel(r)PineView Graphics Chip Accelerated
VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)PineView Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) VESA(0): Splitting WC range: base: 0xd0000000, size: 0x7f0000
(II) VESA(0): Splitting WC range: base: 0xd0400000, size: 0x3f0000
(II) VESA(0): Splitting WC range: base: 0xd0600000, size: 0x1f0000
(II) VESA(0): Splitting WC range: base: 0xd0700000, size: 0xf0000
(II) VESA(0): Splitting WC range: base: 0xd0780000, size: 0x70000
(II) VESA(0): Splitting WC range: base: 0xd07c0000, size: 0x30000
(==) VESA(0): Write-combining range (0xd07e0000,0x10000)
(==) VESA(0): Write-combining range (0xd07c0000,0x30000)
(==) VESA(0): Write-combining range (0xd0780000,0x70000)
(WW) VESA(0): Failed to set up write-combining range (0xd0700000,0xf0000)
(WW) VESA(0): Failed to set up write-combining range (0xd0600000,0x1f0000)
(WW) VESA(0): Failed to set up write-combining range (0xd0400000,0x3f0000)
(WW) VESA(0): Failed to set up write-combining range (0xd0000000,0x7f0000)
(II) VESA(0): virtual address = 0xb695b000,
physical address = 0xd0000000, size = 8323072
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(II) VESA(0): DPMS enabled
(WW) VESA(0): Option "UseFBDev" is not used
Usando google ho trovato che bisogna usare i driver intel, più
precisamente bisogna aggiungere
Driver "intel"
nella sezione Device del file xorg.conf.
Ma in questo modo il server X non parte ancora e tra i log trovo:
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Non trova il device?
Qualche idea?
Qualcuno ha già acquistato questa scheda?
Grazie.
Matteo
Reply to: