Re: Samba
On Sun, 2002-04-07 at 13:30, Andrea Dinale wrote:
> prova a settare a "true" la voce "encrypt password"
> linux di default usa password scritte in chiaro, mentre windows le usa
> crittate.
> hai due soluzioni, o modifichi il registro di configurazione di ogni
> macchina windows,
> per fare in modo che le password siano spedite in chiaro, oppure dici al
> server samba di usarer le password crittate (secondo me la seconda è più
> semplice, ma dipende da quante macchine win ci sono)
> ciao!
>
> P.S. il precedente messaggio lo hai spedito direttamente a me, non alla
> lista, ed io ti invio la risposta al tuo indirizzo privato, se ritieni che
> possa essere postato in lista inoltralo tu.
> ciao!
>
> ----- Original Message -----
> From: "Stefano Simonucci" <stefano.simonucci@tin.it>
> To: "Andrea Dinale" <andreadinale@libero.it>
> Sent: Saturday, April 06, 2002 10:24 AM
> Subject: Re: Samba
>
>
> On Sat, 2002-04-06 at 10:15, Andrea Dinale wrote:
> > l'utente "stefano" esiste anche su linux?
> > con certe configurazioni di smb.conf è necesario che esiste lo stasso
> utente
> > in linux ed in samba, non è necessario che abbiano la stessa password.
> > é la prima cosa che mi è venuta in mente, se non è così prova a mandarmi
> il
> > tuop smb.conf e vedo se ci capisco qualcosa!
> > ciao
> Si'. L' utente stefano esiste anche su linux. Ora attacco smb.conf
>
> #
> # Sample configuration file for the Samba suite for Debian GNU/Linux.
> #
> # $Id: smb.conf,v 1.2.4.6 2002/03/13 18:56:16 peloy Exp $
> #
> # This is the main Samba configuration file. You should read the
> # smb.conf(5) manual page in order to understand the options listed
> # here. Samba has a huge number of configurable options most of which
> # are not shown in this example
> #
> # Any line which starts with a ; (semi-colon) or a # (hash)
> # is a comment and is ignored. In this example we will use a #
> # for commentary and a ; for parts of the config file that you
> # may wish to enable
> #
> # NOTE: Whenever you modify this file you should run the command
> # "testparm" to check that you have not many any basic syntactic
> # errors.
> #
>
> #======================= Global Settings =======================
>
> [global]
>
> # Change this for the workgroup/NT-domain name your Samba server will part
> of
> workgroup = DEBIAN_FANS
>
> # server string is the equivalent of the NT Description field
> server string = %h server (Samba %v)
>
> # If you want to automatically load your printer list rather
> # than setting them up individually then you'll need this
> ; load printers = yes
>
> # You may wish to override the location of the printcap file
> ; printcap name = /etc/printcap
>
> # 'printing = cups' works nicely
> printing = cups
>
> ; guest account = nobody
> invalid users = root
>
> # This tells Samba to use a separate log file for each machine
> # that connects
> log file = /var/log/samba/log.%m
>
> # Put a capping on the size of the log files (in Kb).
> max log size = 1000
>
> # If you want Samba to log though syslog only then set the following
> # parameter to 'yes'. Please note that logging through syslog in
> # Samba is still experimental.
> ; syslog only = no
>
> # We want Samba to log a minimum amount of information to syslog. Everything
> # should go to /var/log/samba/log.{smb,nmb} instead. If you want to log
> # through syslog you should set the following parameter to something higher.
> syslog = 0
>
> # "security = user" is always a good idea. This will require a Unix account
> # in this server for every user accessing the server. See
> # security_level.txt for details.
> security = user
>
> # You may wish to use password encryption. Please read ENCRYPTION.txt,
> # Win95.txt and WinNT.txt in the Samba documentation. Do not enable this
> # option unless you have read those documents
> encrypt passwords = false
>
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting
> ; include = /home/samba/etc/smb.conf.%m
>
> # Most people will find that this option gives better performance.
> # See speed.txt and the manual pages for details
> # You may want to add the following on a Linux system:
> # SO_RCVBUF=8192 SO_SNDBUF=8192
> socket options = TCP_NODELAY
>
> # --- Browser Control Options ---
>
> # Please _read_ BROWSING.txt and set the next four parameters according
> # to your network setup. The defaults are specified below (commented
> # out.) It's important that you read BROWSING.txt so you don't break
> # browsing in your network!
>
> # set local master to no if you don't want Samba to become a master
> # browser on your network. Otherwise the normal election rules apply
> ; local master = yes
>
> # OS Level determines the precedence of this server in master browser
> # elections. The default value should be reasonable
> ; os level = 20
>
> # Domain Master specifies Samba to be the Domain Master Browser. This
> # allows Samba to collate browse lists between subnets. Don't use this
> # if you already have a Windows NT domain controller doing this job
> ; domain master = auto
>
> # Preferred Master causes Samba to force a local browser election on startup
> # and gives it a slightly higher chance of winning the election
> ; preferred master = auto
>
> # --- End of Browser Control Options ---
>
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable it's WINS
> Server
> ; wins support = no
>
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> ; wins server = w.x.y.z
>
> # This will prevent nmbd to search for NetBIOS names through DNS.
> dns proxy = no
>
> # What naming service and in what order should we use to resolve host names
> # to IP addresses
> name resolve order = lmhosts host wins bcast
>
> # Name mangling options
> ; preserve case = yes
> ; short preserve case = yes
>
> # This boolean parameter controlls whether Samba attempts to sync. the Unix
> # password with the SMB password when the encrypted SMB password in the
> # /etc/samba/smbpasswd file is changed.
> unix password sync = false
>
> # For Unix password sync. to work on a Debian GNU/Linux system, the
> following
> # parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr>
> for
> # sending the correct chat script for the passwd program in Debian Potato).
> passwd program = /usr/bin/passwd %u
> passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
> *Retype\snew\sUNIX\spassword:* %n\n .
>
> # This boolean controls whether PAM will be used for password changes
> # when requested by an SMB client instead of the program listed in
> # 'passwd program'. The default is 'no'.
> pam password change = no
>
> # The following parameter is useful only if you have the linpopup package
> # installed. The samba maintainer and the linpopup maintainer are
> # working to ease installation and configuration of linpopup and samba.
> ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
>
> obey pam restrictions = yes
>
> # Some defaults for winbind (make sure you're not using the ranges
> # for something else.)
> ; winbind uid = 10000-20000
> ; winbind gid = 10000-20000
> ; template shell = /bin/bash
>
> #======================= Share Definitions =======================
>
> [homes]
> comment = Home Directories
> browseable = yes
>
> # By default, the home directories are exported read-only. Change next
> # parameter to 'yes' if you want to be able to write to them.
> writable = no
>
> # File creation mask is set to 0700 for security reasons. If you want to
> # create files with group=rw permissions, set next parameter to 0775.
> create mask = 0700
>
> # Directory creation mask is set to 0700 for security reasons. If you want
> to
> # create dirs. with group=rw permissions, set next parameter to 0775.
> directory mask = 0700
>
> # Un-comment the following and create the netlogon directory for Domain
> Logons
> # (you need to configure Samba to act as a domain controller too.)
> ;[netlogon]
> ; comment = Network Logon Service
> ; path = /home/samba/netlogon
> ; guest ok = yes
> ; writable = no
> ; share modes = no
>
> [printers]
> comment = All Printers
> browseable = no
> path = /tmp
> printable = yes
> public = no
> writable = no
> create mode = 0700
>
> # A sample share for sharing your CD-ROM with others.
> [cdrom]
> comment = Samba server's CD-ROM
> writable = no
> locking = no
> path = /cdrom
> public = yes
>
> # The next two parameters show how to auto-mount a CD-ROM when the
> # cdrom share is accesed. For this to work /etc/fstab must contain
> # an entry like this:
> #
> # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
> #
> # The CD-ROM gets unmounted automatically after the connection to the
> #
> # If you don't want to use auto-mounting/unmounting make sure the CD
> # is mounted on /cdrom
> #
> preexec = /bin/mount /cdrom
> postexec = /bin/umount /cdrom
>
>
>
Fatto grazie! Ora funziona
evidentemente era proprio "encrypt password = false"
che bloccava l' autenticazione.
Stefano
--
To UNSUBSCRIBE, email to debian-italian-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to:
- References:
- Samba
- From: Stefano Simonucci <stefano.simonucci@tin.it>
- Re: Samba
- From: "Andrea Dinale" <andreadinale@libero.it>