[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#686105: marked as done (Failed installation at Detect network hardware because mount -tauto hangs mounting an Extended Partition (Id 5))

Your message dated Wed, 29 Aug 2012 07:06:50 +0200
with message-id <20120829050650.GK5052@mykerinos.kheops.frmug.org>
and subject line Re: Bug#686105: Failed installation at Detect network hardware because mount -tauto hangs mounting an Extended Partition (Id 5)
has caused the Debian Bug report #686105,
regarding Failed installation at Detect network hardware because mount -tauto hangs mounting an Extended Partition (Id 5)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
686105: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=686105
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Boot method: USB stick, using Default and Expert install.
Image version:
http://cdimage.debian.org/cdimage/weekly-builds/amd64/iso-cd/debian-testing-amd64-CD-1.iso
(20-Ago-2012)
Date: 22-Ago-2012

Machine:    Self-built with Intel MotherBoard
Processor:  Intel Pentium D
Memory:
Partitions: (fdisk -l)
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x1580d815

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *          63   122882047    61440992+   7  HPFS/NTFS/exFAT
/dev/sda2       134207010   134753219      273105   83  Linux
/dev/sda3       134753281   312576704    88911712    5  Extended
/dev/sda5       134753283   144520739     4883728+  83  Linux
/dev/sda6       144520803   150384464     2931831   83  Linux
/dev/sda7       150384528   156392774     3004123+  82  Linux swap / Solaris
/dev/sda8       156392838   157179959      393561   83  Linux
/dev/sda9       157180023   312576704    77698341   83  Linux



Output of lspci -knn:
00:00.0 Host bridge [0600]: Intel Corporation 82946GZ/PL/GL Memory Controller Hub [8086:2970] (rev 02)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82946GZ/GL Integrated Graphics Controller [8086:2972] (rev 02)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: i915
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
        Subsystem: Intel Corporation Device [8086:a201]
        Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
        Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01)
        Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)
        Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
        Subsystem: Intel Corporation Device [8086:5354]
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
        Subsystem: Intel Corporation Device [8086:5354]
        Kernel driver in use: i801_smbus
04:01.0 Network controller [0280]: Ralink corp. RT2561/RT61 802.11g PCI [1814:0301]
        Subsystem: Ralink corp. EW-7108PCg [1814:2561]
        Kernel driver in use: rt61pci
04:08.0 Ethernet controller [0200]: Intel Corporation PRO/100 VE Network Connection [8086:1094] (rev 01)
        Subsystem: Intel Corporation Device [8086:0001]
        Kernel driver in use: e100

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect CD:              [O]
Load installer modules: [O]
Detect network card:    [E]
Configure network:      [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]


Comments/Problems:
The installer hungs during the "Detect network hardware" step. The
"Detecting hardware" progress bar displays
briefly, then clears to an empty blue screen with a single white line at the
bottom. There is no further screen output.
The installation was looking for Ralink corp. RT2561/RT61 firmware

In the ALT F2 console a ps -ax told

mount -tauto /dev/sda3

/dev/sda3 is an Extended (ID 5) Partition

I can run this command (mount -tauto /dev/sda3) in ALT F2 console before accepting to detect
network card and it hang that console. Then I can work in ALT F3 console.

I can finish the installation process if I don't install the network.
Then, after booting I can install the network, mounting both, the
installation stick and the other stick where I've got the firmware. And after
that I can finish the installation of the packages that are not in the CD1
and update/upgrade with apt-get and aptitude.
--- End Message ---
--- Begin Message --- 
Quoting John Nutt (jnutt104@gmail.com):

> Comments/Problems:
> The installer hungs during the "Detect network hardware" step. The
> "Detecting hardware" progress bar displays
> briefly, then clears to an empty blue screen with a single white line at the
> bottom. There is no further screen output.
> The installation was looking for Ralink corp. RT2561/RT61 firmware


Known problem (this is a kernel bug). Should be fixed in beta2,
hopefully as it's worked around in mountmedia.

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: