Package: installation-reports
Severity: important
-- Package-specific info:
Boot method: CD
Image version: Debian installer 6.0alpha1
Date: The 2 days preceding Sun Mar 7 08:26:32 UTC 2010
Machine: PowerMac G5 Quad (M9592)
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sdb4 ext3 922517820 4569404 871087188 1% /
tmpfs tmpfs 8121084 0 8121084 0% /lib/init/rw
udev tmpfs 10240 188 10052 2% /dev
tmpfs tmpfs 8121084 0 8121084 0% /dev/shm
/dev/sdb
# type name length base ( size ) system
/dev/sdb1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/sdb2 Apple_Bootstrap bootstrap 1600 @ 64 (800.0k) NewWorld bootblock
/dev/sdb3 Apple_Free Extra 354 @ 1664 (177.0k) Free space
/dev/sdb4 Apple_UNIX_SVR2 root 1874449219 @ 2018 (893.8G) Linux native
/dev/sdb5 Apple_UNIX_SVR2 swap 79073931 @ 1874451237 ( 37.7G) Linux swap
Block size=512, Number of Blocks=1953525168
DeviceType=0x0, DeviceId=0x0
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [E]
Comments/Problems:
Installation worked beautifully with the major exception of yaboot getting
hopelessly confused.
Evidently the ofpath utility has not been updated to handle the state of the
world now that /proc/scsi/scsi is deprecated. I had to dredge out old
OpenFirmware references and manually edit /etc/yaboot.conf, then run mkofboot.
This generation of PowerMacs (the very last :-( ) uses SATA drives on a PCI-E
bus.
Once I stuffed OpenFirware device-tree magic into yaboot.conf, things sprinted
to a finish. Even X worked on this foul NVidia device.
Oddly, in rescue mode, the installer told me that installing yaboot failed, then
told me it succeeded with the very next dialog. Its first guess was correct; I
had to implement the fix myself at a shell prompt.
Here is my /etc/yaboot.conf in case other poor miserable G5 users suffer my
SATAnic fate. I had to add ofboot, and correct partition and root (which were 3
instead of 4). At some point I managed to create an over-sized blank area for
the hfs bootblock partition, wasting 177kB of precious space.
N.B.: I'm booting from the second SATA drive, not the first, because I stupidly
installed the drives in the wrong order. People using sda will probably want:
ofboot=/ht/pci@9/k2-sata-root/k2-sata@0/disk@0:2
## yaboot.conf generated by debian-installer
##
## run: "man yaboot.conf" for details. Do not make changes until you have!!
## see also: /usr/share/doc/yaboot/examples for example configurations.
##
## For a dual-boot menu, add one or more of:
## bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ
boot=/dev/sdb2
ofboot=/ht/pci@9/k2-sata-root/k2-sata@1/disk@0:2
partition=4
root=/dev/sdb4
timeout=50
install=/usr/lib/yaboot/yaboot
magicboot=/usr/lib/yaboot/ofboot
enablecdboot
image=/boot/vmlinux
label=Linux
read-only
initrd=/boot/initrd.img
image=/boot/vmlinux.old
label=old
read-only
initrd=/boot/initrd.img.old
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
*** I can't find these logs. Where did they go?
Here's lspci:
0000:00:0b.0 PCI bridge: Apple Computer Inc. CPC945 PCIe Bridge
0000:0a:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)
0001:00:00.0 Host bridge: Apple Computer Inc. U4 HT Bridge
0001:00:01.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3)
0001:00:02.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3)
0001:00:03.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3)
0001:00:04.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3)
0001:00:05.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3)
0001:00:06.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3)
0001:00:07.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:00:08.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:00:09.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:01:07.0 Class ff00: Apple Computer Inc. Shasta Mac I/O
0001:01:0b.0 USB Controller: NEC Corporation USB (rev 43)
0001:01:0b.1 USB Controller: NEC Corporation USB (rev 43)
0001:01:0b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0001:03:0c.0 IDE interface: Broadcom K2 SATA
0001:03:0d.0 Class ff00: Apple Computer Inc. Shasta IDE
0001:03:0e.0 FireWire (IEEE 1394): Apple Computer Inc. Shasta Firewire
0001:05:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03)
0001:05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03)
Here's dmesg:
[ 0.000000] DART table allocated at: c00000007f000000
[ 0.000000] Using PowerMac machine description
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
[ 0.000000] Found initrd at 0xc000000001e00000:0xc00000000269a000
[ 0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42
[ 0.000000] Mapped at 0xd000080080000000
[ 0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000
[ 0.000000] PowerMac motherboard: PowerMac G5 Dual Core
[ 0.000000] DART IOMMU initialized for U4 type chipset
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Starting Linux PPC64 #1 SMP Mon Jan 11 16:09:37 UTC 2010
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] physicalMemorySize = 0x400000000
[ 0.000000] htab_address = 0xc000000470000000
[ 0.000000] htab_hash_mask = 0x1fffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-powerpc64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Mon Jan 11 16:09:37 UTC 2010
[ 0.000000] [boot]0012 Setup Arch
[ 0.000000] Top of RAM: 0x480000000, Total RAM: 0x400000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Found U4-PCIE PCI host bridge. Firmware bus number: 0->255
[ 0.000000] PCI host bridge /pci@0,f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
[ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239
[ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
[ 0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp.
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=264, gen1=265
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00480000
[ 0.000000] Normal 0x00480000 -> 0x00480000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00080000
[ 0.000000] 0: 0x00100000 -> 0x00480000
[ 0.000000] On node 0 totalpages: 4194304
[ 0.000000] DMA zone: 64512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4129792 pages, LIFO batch:31
[ 0.000000] [boot]0015 Setup Done
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c000000000900000 s26792 r0 d30552 u262144
[ 0.000000] pcpu-alloc: s26792 r0 d30552 u262144 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4129792
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=/dev/sdb4 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] freeing bootmem node 0
[ 0.000000] Memory: 16233012k/16777216k available (6868k kernel code, 544204k reserved, 1208k data, 815k bss, 348k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=256
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 124 sources
[ 0.000000] mpic: Setting up HT PICs workarounds for U3/U4
[ 0.000000] mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000
[ 0.000000] mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs
[ 0.000000] time_init: decrementer frequency = 33.333333 MHz
[ 0.000000] time_init: processor frequency = 2500.000000 MHz
[ 0.000000] clocksource: timebase mult[7800001] shift[22] registered
[ 0.000000] clockevent: decrementer mult[8888887] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] irq: irq 23 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 23
[ 0.000000] irq: irq 24 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 24
[ 0.000993] Security Framework initialized
[ 0.001000] SELinux: Disabled at boot.
[ 0.002777] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.015468] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.021365] Mount-cache hash table entries: 256
[ 0.023020] device-tree: Duplicate name in /ht@0,f2000000/pci@8/mac-io@7/i2c@18000, renamed to "i2c-bus@0#1"
[ 0.024511] Initializing cgroup subsys ns
[ 0.024516] Initializing cgroup subsys cpuacct
[ 0.024523] Initializing cgroup subsys devices
[ 0.024528] Initializing cgroup subsys freezer
[ 0.024532] Initializing cgroup subsys net_cls
[ 0.024858] PowerMac SMP probe found 4 cpus
[ 0.024932] irq: irq 0 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 16
[ 0.024951] KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000
[ 0.024957] channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1
[ 0.024971] irq: irq 27 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 27
[ 0.024982] KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000
[ 0.024988] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
[ 0.024993] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
[ 0.025004] SMU i2c /smu@0,0/smu-i2c-control@0
[ 0.025008] channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b
[ 0.025013] channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e
[ 0.025033] Processor timebase sync using platform function
[ 0.025038] mpic: requesting IPIs ...
[ 0.025045] irq: irq 251 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 251
[ 0.025053] irq: irq 252 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 252
[ 0.025060] irq: irq 253 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 253
[ 0.025067] irq: irq 254 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 254
[ 0.026810] Processor 1 found.
[ 0.026825] clockevent: decrementer mult[8888887] shift[32] cpu[1]
[ 0.028409] Processor 2 found.
[ 0.028420] clockevent: decrementer mult[8888887] shift[32] cpu[2]
[ 0.030002] Processor 3 found.
[ 0.030013] clockevent: decrementer mult[8888887] shift[32] cpu[3]
[ 0.030035] Brought up 4 CPUs
[ 0.030932] CPU0 attaching sched-domain:
[ 0.030936] domain 0: span 0-3 level CPU
[ 0.030939] groups: 0 1 2 3
[ 0.030946] CPU1 attaching sched-domain:
[ 0.030949] domain 0: span 0-3 level CPU
[ 0.030951] groups: 1 2 3 0
[ 0.030958] CPU2 attaching sched-domain:
[ 0.030961] domain 0: span 0-3 level CPU
[ 0.030963] groups: 2 3 0 1
[ 0.030970] CPU3 attaching sched-domain:
[ 0.030972] domain 0: span 0-3 level CPU
[ 0.030975] groups: 3 0 1 2
[ 0.031224] devtmpfs: initialized
[ 0.065155] regulator: core version 0.5
[ 0.065186] irq: irq 53 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 53
[ 0.065197] irq: irq 48 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 48
[ 0.065300] NET: Registered protocol family 16
[ 0.065331] IBM eBus Device Driver
[ 0.065545] PPC970/FX/MP performance monitor hardware support registered
[ 0.066266] CPU Hotplug not supported by firmware - disabling.
[ 0.103773] PCI: Probing PCI hardware
[ 0.103924] PCI: Fixup U4 PCIe bridge range: [0x90000000-0xafffffff]
[ 0.103948] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.103955] pci 0000:00:0b.0: PME# disabled
[ 0.136766] IOMMU table initialized, virtual merging enabled
[ 0.136812] pci 0000:0a:00.0: reg 10 32bit mmio: [0xa1000000-0xa1ffffff]
[ 0.136822] pci 0000:0a:00.0: reg 14 64bit mmio pref: [0x90000000-0x9fffffff]
[ 0.136833] pci 0000:0a:00.0: reg 1c 64bit mmio: [0xa0000000-0xa0ffffff]
[ 0.136844] pci 0000:0a:00.0: reg 30 32bit mmio pref: [0xa2000000-0xa201ffff]
[ 0.136921] pci 0000:00:0b.0: bridge io port: [0x00-0xffff]
[ 0.136926] pci 0000:00:0b.0: bridge 32bit mmio: [0x90000000-0xafffffff]
[ 0.136933] pci 0000:00:0b.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.136957] irq: irq 3 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 17
[ 0.137655] pci 0001:05:04.0: reg 10 64bit mmio: [0xfa530000-0xfa53ffff]
[ 0.137663] pci 0001:05:04.0: reg 18 64bit mmio: [0xfa520000-0xfa52ffff]
[ 0.137692] pci 0001:05:04.0: PME# supported from D3hot D3cold
[ 0.137698] pci 0001:05:04.0: PME# disabled
[ 0.137740] pci 0001:05:04.1: reg 10 64bit mmio: [0xfa510000-0xfa51ffff]
[ 0.137748] pci 0001:05:04.1: reg 18 64bit mmio: [0xfa500000-0xfa50ffff]
[ 0.137776] pci 0001:05:04.1: PME# supported from D3hot D3cold
[ 0.137782] pci 0001:05:04.1: PME# disabled
[ 0.137805] pci 0001:00:02.0: bridge 32bit mmio: [0xfa500000-0xfa5fffff]
[ 0.137819] irq: irq 66 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 66
[ 0.137831] irq: irq 67 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 67
[ 0.137935] pci 0001:00:07.0: bridge 32bit mmio: [0xfa000000-0xfa3fffff]
[ 0.137940] pci 0001:00:07.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.137968] pci 0001:01:07.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.138025] pci 0001:01:0b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
[ 0.138064] pci 0001:01:0b.0: supports D1 D2
[ 0.138067] pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.138073] pci 0001:01:0b.0: PME# disabled
[ 0.138109] pci 0001:01:0b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.138147] pci 0001:01:0b.1: supports D1 D2
[ 0.138150] pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.138157] pci 0001:01:0b.1: PME# disabled
[ 0.138192] pci 0001:01:0b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
[ 0.138231] pci 0001:01:0b.2: supports D1 D2
[ 0.138234] pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.138240] pci 0001:01:0b.2: PME# disabled
[ 0.138262] pci 0001:00:08.0: bridge 32bit mmio: [0x80000000-0x800fffff]
[ 0.138267] pci 0001:00:08.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.138288] irq: irq 70 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 70
[ 0.138331] pci 0001:03:0c.0: reg 10 io port: [0x00-0x07]
[ 0.138337] pci 0001:03:0c.0: reg 14 io port: [0x00-0x03]
[ 0.138343] pci 0001:03:0c.0: reg 18 io port: [0x00-0x07]
[ 0.138349] pci 0001:03:0c.0: reg 1c io port: [0x00-0x03]
[ 0.138355] pci 0001:03:0c.0: reg 20 io port: [0x00-0x0f]
[ 0.138361] pci 0001:03:0c.0: reg 24 32bit mmio: [0xfa402000-0xfa403fff]
[ 0.138397] pci 0001:03:0d.0: reg 10 32bit mmio: [0xfa404000-0xfa407fff]
[ 0.138450] pci 0001:03:0e.0: reg 10 32bit mmio: [0xfa400000-0xfa400fff]
[ 0.138486] pci 0001:03:0e.0: supports D1 D2
[ 0.138489] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.138495] pci 0001:03:0e.0: PME# disabled
[ 0.138514] pci 0001:00:09.0: bridge 32bit mmio: [0xfa400000-0xfa4fffff]
[ 0.138519] pci 0001:00:09.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.138534] irq: irq 10 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 18
[ 0.138548] irq: irq 38 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 38
[ 0.138562] irq: irq 39 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 39
[ 0.139436] PCI 0000:00 Cannot reserve Legacy IO [0x10000-0x10fff]
[ 0.139480] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:0a
[ 0.139487] pci 0000:00:0b.0: IO window: 0x00-0xffff
[ 0.139494] pci 0000:00:0b.0: MEM window: 0x90000000-0xafffffff
[ 0.139500] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.139513] pci 0001:00:01.0: PCI bridge, secondary bus 0001:04
[ 0.139518] pci 0001:00:01.0: IO window: disabled
[ 0.139523] pci 0001:00:01.0: MEM window: disabled
[ 0.139528] pci 0001:00:01.0: PREFETCH window: disabled
[ 0.139533] pci 0001:00:02.0: PCI bridge, secondary bus 0001:05
[ 0.139538] pci 0001:00:02.0: IO window: disabled
[ 0.139544] pci 0001:00:02.0: MEM window: 0xfa500000-0xfa5fffff
[ 0.139549] pci 0001:00:02.0: PREFETCH window: disabled
[ 0.139554] pci 0001:00:03.0: PCI bridge, secondary bus 0001:06
[ 0.139559] pci 0001:00:03.0: IO window: disabled
[ 0.139564] pci 0001:00:03.0: MEM window: disabled
[ 0.139569] pci 0001:00:03.0: PREFETCH window: disabled
[ 0.139574] pci 0001:00:04.0: PCI bridge, secondary bus 0001:07
[ 0.139578] pci 0001:00:04.0: IO window: disabled
[ 0.139584] pci 0001:00:04.0: MEM window: disabled
[ 0.139588] pci 0001:00:04.0: PREFETCH window: disabled
[ 0.139594] pci 0001:00:05.0: PCI bridge, secondary bus 0001:08
[ 0.139598] pci 0001:00:05.0: IO window: disabled
[ 0.139603] pci 0001:00:05.0: MEM window: disabled
[ 0.139608] pci 0001:00:05.0: PREFETCH window: disabled
[ 0.139614] pci 0001:00:06.0: PCI bridge, secondary bus 0001:09
[ 0.139618] pci 0001:00:06.0: IO window: disabled
[ 0.139623] pci 0001:00:06.0: MEM window: disabled
[ 0.139628] pci 0001:00:06.0: PREFETCH window: disabled
[ 0.139634] pci 0001:00:07.0: PCI bridge, secondary bus 0001:02
[ 0.139638] pci 0001:00:07.0: IO window: disabled
[ 0.139644] pci 0001:00:07.0: MEM window: 0xfa000000-0xfa3fffff
[ 0.139649] pci 0001:00:07.0: PREFETCH window: disabled
[ 0.139655] pci 0001:00:08.0: PCI bridge, secondary bus 0001:01
[ 0.139660] pci 0001:00:08.0: IO window: disabled
[ 0.139665] pci 0001:00:08.0: MEM window: 0x80000000-0x800fffff
[ 0.139671] pci 0001:00:08.0: PREFETCH window: disabled
[ 0.139676] pci 0001:00:09.0: PCI bridge, secondary bus 0001:03
[ 0.139681] pci 0001:00:09.0: IO window: disabled
[ 0.139687] pci 0001:00:09.0: MEM window: 0xfa400000-0xfa4fffff
[ 0.139692] pci 0001:00:09.0: PREFETCH window: disabled
[ 0.139714] pci_bus 0000:00: resource 0 io: [0x10000-0x80ffff]
[ 0.139718] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.139721] pci_bus 0000:00: resource 2 mem: [0x90000000-0xafffffff]
[ 0.139724] pci_bus 0000:0a: resource 0 io: [0x10000-0x1ffff]
[ 0.139728] pci_bus 0000:0a: resource 1 mem: [0x90000000-0xafffffff]
[ 0.139731] pci_bus 0000:0a: resource 2 mem: [0x0-0xfffff]
[ 0.139734] pci_bus 0001:00: resource 0 io: [0x812000-0xc11fff]
[ 0.139738] pci_bus 0001:00: resource 1 mem: [0xfa000000-0xffffffff]
[ 0.139741] pci_bus 0001:00: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.139744] pci_bus 0001:00: resource 3 mem: [0xb0000000-0xefffffff]
[ 0.139748] pci_bus 0001:05: resource 1 mem: [0xfa500000-0xfa5fffff]
[ 0.139752] pci_bus 0001:02: resource 1 mem: [0xfa000000-0xfa3fffff]
[ 0.139755] pci_bus 0001:02: resource 2 mem: [0x0-0xfffff]
[ 0.139758] pci_bus 0001:01: resource 1 mem: [0x80000000-0x800fffff]
[ 0.139761] pci_bus 0001:01: resource 2 mem: [0x0-0xfffff]
[ 0.139765] pci_bus 0001:03: resource 1 mem: [0xfa400000-0xfa4fffff]
[ 0.139768] pci_bus 0001:03: resource 2 mem: [0x0-0xfffff]
[ 0.139770] PCI: Probing PCI hardware done
[ 0.139773] Registering pmac pic with sysfs...
[ 0.143941] bio: create slab <bio-0> at 0
[ 0.144130] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none
[ 0.144164] vgaarb: loaded
[ 0.144322] Switching to clocksource timebase
[ 0.146505] NET: Registered protocol family 2
[ 0.147086] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.151341] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.157435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.158677] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.158686] TCP reno registered
[ 0.158855] NET: Registered protocol family 1
[ 0.158910] pci 0001:00:03.0: Found enabled HT MSI Mapping
[ 0.158920] pci 0001:00:04.0: Found enabled HT MSI Mapping
[ 0.158931] pci 0001:00:05.0: Found enabled HT MSI Mapping
[ 0.158942] pci 0001:00:06.0: Found enabled HT MSI Mapping
[ 0.159062] Unpacking initramfs...
[ 0.434102] Freeing initrd memory: 8808k freed
[ 0.434667] nvram_init: Could not find nvram partition for nvram buffered error logging.
[ 0.448445] Registering G5 CPU frequency driver
[ 0.448450] Frequency method: SCOM, Voltage method: GPIO
[ 0.448455] Low: 1250 Mhz, High: 2500 Mhz, Cur: 2500 MHz
[ 0.448682] audit: initializing netlink socket (disabled)
[ 0.448699] type=2000 audit(1267949230.444:1): initialized
[ 0.449131] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[ 0.451161] VFS: Disk quotas dquot_6.5.2
[ 0.451252] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.451379] msgmni has been set to 31722
[ 0.451694] alg: No test for stdrng (krng)
[ 0.451769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.451777] io scheduler noop registered
[ 0.451781] io scheduler anticipatory registered
[ 0.451785] io scheduler deadline registered
[ 0.451834] io scheduler cfq registered (default)
[ 0.452348] Using unsupported 1600x1200 NVDA,Display-B at 90020000, depth=8, pitch=2048
[ 0.485533] Console: switching to colour frame buffer device 200x75
[ 0.516725] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-B@1
[ 0.518644] vio_register_driver: driver hvc_console registering
[ 0.518661] HVSI: registered 0 devices
[ 0.518665] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.519024] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 0.519220] ttyPZ0 at MMIO 0x80013020 (irq = 23) is a Z85c30 ESCC - Serial port
[ 0.519435] ttyPZ1 at MMIO 0x80013000 (irq = 24) is a Z85c30 ESCC - Serial port
[ 0.519748] MacIO PCI driver attached to Shasta chipset
[ 0.520096] irq: irq 35 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 35
[ 0.520142] irq: irq 17 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 19
[ 0.520152] irq: irq 18 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 20
[ 0.520231] irq: irq 19 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 21
[ 0.520241] irq: irq 20 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 22
[ 0.520389] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.520715] Uniform Multi-Platform E-IDE driver
[ 0.520915] ide-pmac 0001:03:0d.0: enabling device (0004 -> 0006)
[ 1.540443] ide-pmac: Found Apple Shasta ATA-6 controller (PCI), bus ID 3, irq 38
[ 1.540652] Probing IDE interface ide0...
[ 1.940749] hda: HL-DT-ST DVD-RW GWA-4165B, ATAPI CD/DVD-ROM drive
[ 2.276470] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.277258] hda: UDMA/66 mode selected
[ 2.277753] ide0 at 0xd00008008255a000-0xd00008008255a070,0xd00008008255a160 on irq 38
[ 2.278043] ide-gd driver 1.18
[ 2.278234] mice: PS/2 mouse device common for all mice
[ 2.278424] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 2.279171] TCP cubic registered
[ 2.279423] NET: Registered protocol family 10
[ 2.280291] lo: Disabled Privacy Extensions
[ 2.280947] Mobile IPv6
[ 2.281013] NET: Registered protocol family 17
[ 2.281150] PM: Registered nosave memory: 000000007f000000 - 0000000080000000
[ 2.281446] registered taskstats version 1
[ 2.331716] rtc-generic rtc-generic: setting system clock to 2010-03-07 08:07:12 UTC (1267949232)
[ 2.332172] Freeing unused kernel memory: 348k freed
[ 2.453202] PowerMac i2c bus smu 14 registered
[ 2.453351] PowerMac i2c bus smu 11 registered
[ 2.453494] PowerMac i2c bus mac-io 0 registered
[ 2.453638] PowerMac i2c bus mac-io 0 registered
[ 2.453782] PowerMac i2c bus u4 1 registered
[ 2.487418] found max6690, loc=BACKSIDE addr=0x98
[ 2.487585] found max6690, loc=TUNNEL addr=0x9c
[ 2.490532] wf_sat: creating sat at address b0
[ 2.490593] wf_sat: creating sat at address b2
[ 2.492057] windfarm: initializing for dual-core desktop G5
[ 2.763625] windfarm: CPUs control loops started.
[ 2.820589] Linux agpgart interface v0.103
[ 2.843205] tg3.c:v3.102 (September 1, 2009)
[ 2.858779] usbcore: registered new interface driver usbfs
[ 2.858978] usbcore: registered new interface driver hub
[ 2.865868] eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:16:cb:38:e0:16
[ 2.866122] eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.872552] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.876513] usbcore: registered new device driver usb
[ 2.877059] SCSI subsystem initialized
[ 2.892469] eth0: dma_rwctrl[76144000] dma_mask[40-bit]
[ 2.905460] libata version 3.00 loaded.
[ 2.905957] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.910989] ide-cd driver 5.00
[ 2.912455] sata_svw 0001:03:0c.0: version 2.3
[ 2.912652] scsi0 : sata_svw
[ 2.912797] scsi1 : sata_svw
[ 2.912875] scsi2 : sata_svw
[ 2.912954] scsi3 : sata_svw
[ 2.913014] ata1: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18
[ 2.913024] ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18
[ 2.913028] ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18
[ 2.913032] ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18
[ 2.914184] ide-cd: hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 2.914197] Uniform CD-ROM driver Revision: 3.20
[ 2.915334] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
[ 3.000653] ehci_hcd 0001:01:0b.2: enabling device (0004 -> 0006)
[ 3.007347] eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:16:cb:38:e0:17
[ 3.007350] eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 3.007353] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.007355] eth1: dma_rwctrl[76144000] dma_mask[40-bit]
[ 3.041767] ehci_hcd 0001:01:0b.2: EHCI Host Controller
[ 3.050368] ehci_hcd 0001:01:0b.2: new USB bus registered, assigned bus number 1
[ 3.052955] firewire_ohci: Added fw-ohci device 0001:03:0e.0, OHCI version 1.0
[ 3.088472] ehci_hcd 0001:01:0b.2: irq 70, io mem 0x80080000
[ 3.108444] ehci_hcd 0001:01:0b.2: USB 2.0 started, EHCI 1.00
[ 3.116870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.125258] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.133739] usb usb1: Product: EHCI Host Controller
[ 3.142158] usb usb1: Manufacturer: Linux 2.6.32-trunk-powerpc64 ehci_hcd
[ 3.150574] usb usb1: SerialNumber: 0001:01:0b.2
[ 3.159006] usb usb1: configuration #1 chosen from 1 choice
[ 3.167411] hub 1-0:1.0: USB hub found
[ 3.175663] hub 1-0:1.0: 5 ports detected
[ 3.272781] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.281085] ohci_hcd 0001:01:0b.0: enabling device (0000 -> 0002)
[ 3.289250] ohci_hcd 0001:01:0b.0: OHCI Host Controller
[ 3.297308] ohci_hcd 0001:01:0b.0: new USB bus registered, assigned bus number 2
[ 3.305452] ohci_hcd 0001:01:0b.0: irq 70, io mem 0x80082000
[ 3.308484] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.317271] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 3.317274] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.325282] ata1.00: configured for UDMA/133
[ 3.325474] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 3.428295] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.436547] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.444743] usb usb2: Product: OHCI Host Controller
[ 3.452828] usb usb2: Manufacturer: Linux 2.6.32-trunk-powerpc64 ohci_hcd
[ 3.460899] usb usb2: SerialNumber: 0001:01:0b.0
[ 3.469030] usb usb2: configuration #1 chosen from 1 choice
[ 3.477113] hub 2-0:1.0: USB hub found
[ 3.485078] hub 2-0:1.0: 3 ports detected
[ 3.492984] ohci_hcd 0001:01:0b.1: enabling device (0000 -> 0002)
[ 3.500946] ohci_hcd 0001:01:0b.1: OHCI Host Controller
[ 3.508942] ohci_hcd 0001:01:0b.1: new USB bus registered, assigned bus number 3
[ 3.517045] ohci_hcd 0001:01:0b.1: irq 70, io mem 0x80081000
[ 3.548541] firewire_core: created device fw0: GUID 001451fffe3d4afc, S800
[ 3.556306] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[ 3.600287] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.608141] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.616015] usb usb3: Product: OHCI Host Controller
[ 3.623676] usb usb3: Manufacturer: Linux 2.6.32-trunk-powerpc64 ohci_hcd
[ 3.631510] sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 3.631533] usb usb3: SerialNumber: 0001:01:0b.1
[ 3.639226] usb usb3: configuration #1 chosen from 1 choice
[ 3.646891] hub 3-0:1.0: USB hub found
[ 3.654486] hub 3-0:1.0: 2 ports detected
[ 3.656984] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.673451] ata2.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 3.681008] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.705475] ata2.00: configured for UDMA/133
[ 3.713069] scsi 1:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 3.872456] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 4.040467] ata3: SATA link down (SStatus 0 SControl 0)
[ 4.094468] usb 2-2: New USB device found, idVendor=05ac, idProduct=1003
[ 4.102127] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.109846] usb 2-2: Product: Hub in Apple Extended USB Keyboard
[ 4.117656] usb 2-2: Manufacturer: Mitsumi Electric
[ 4.125628] usb 2-2: configuration #1 chosen from 1 choice
[ 4.135511] hub 2-2:1.0: USB hub found
[ 4.144467] hub 2-2:1.0: 3 ports detected
[ 4.272679] sat 0 partition c4: c4 4 1 7f a0 12 20 5f ff 55 29 14 7b 12 0 0
[ 4.364467] ata4: SATA link down (SStatus 0 SControl 0)
[ 4.383486] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.384102] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.384169] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.384172] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.384205] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.384476] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5
[ 4.424022] sd 0:0:0:0: [sda] Write Protect is off
[ 4.424217] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.439820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.439857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.447960] sda:
[ 4.455478] usb 2-2.2: new low speed USB device using ohci_hcd and address 3
[ 4.582464] usb 2-2.2: New USB device found, idVendor=05ac, idProduct=0307
[ 4.590436] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.598345] usb 2-2.2: Product: Apple Optical USB Mouse
[ 4.606182] usb 2-2.2: Manufacturer: Logitech
[ 4.614230] usb 2-2.2: configuration #1 chosen from 1 choice
[ 4.698603] usb 2-2.3: new full speed USB device using ohci_hcd and address 4
[ 4.820451] usb 2-2.3: New USB device found, idVendor=05ac, idProduct=020b
[ 4.828303] usb 2-2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 4.836145] usb 2-2.3: Product: Apple Extended USB Keyboard
[ 4.843953] usb 2-2.3: Manufacturer: Mitsumi Electric
[ 4.852198] usb 2-2.3: configuration #1 chosen from 1 choice
[ 4.877223] usbcore: registered new interface driver hiddev
[ 4.890725] input: Logitech Apple Optical USB Mouse as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input1
[ 4.899061] generic-usb 0003:05AC:0307.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0001:01:0b.0-2.2/input0
[ 4.914743] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[ 4.923470] generic-usb 0003:05AC:020B.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:01:0b.0-2.3/input0
[ 4.936776] [mac] sda1 sda2 sda3
[ 4.943555] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.3/2-2.3:1.1/input/input3
[ 4.943638] generic-usb 0003:05AC:020B.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:01:0b.0-2.3/input1
[ 4.943680] usbcore: registered new interface driver usbhid
[ 4.943684] usbhid: v2.6:USB HID core driver
[ 4.983909] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.135196] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 5.204418] PM: Starting manual resume from disk
[ 5.308175] kjournald starting. Commit interval 5 seconds
[ 5.318005] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.782780] sat 0 partition c5: c5 4 1 7f a0 12 20 5f ff 55 d7 15 7b 12 0 0
[ 6.645159] sat 1 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 7.210885] udev: starting version 151
[ 7.287656] sat 1 partition c4: c4 4 1 7f a0 12 20 5f ff 55 48 15 7b 12 0 0
[ 8.150283] sat 1 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0
[ 8.797169] sat 1 partition c5: c5 4 1 7f a0 12 20 5f ff 55 48 15 7b 12 0 0
[ 9.195225] irq: irq 28 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 28
[ 9.195256] irq: irq 11 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 25
[ 9.195274] irq: irq 12 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 26
[ 9.195404] irq: irq 30 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 30
[ 9.195423] irq: irq 15 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 29
[ 9.195443] irq: irq 16 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 31
[ 9.204650] snd-aoa-fabric-layout: Using PMF GPIOs
[ 9.228669] snd-aoa-codec-onyx: found pcm3052
[ 9.229161] snd-aoa-fabric-layout: platform-onyx-codec-ref doesn't match!
[ 9.252392] snd-aoa: fabric didn't like codec onyx
[ 9.275411] snd-aoa-codec-onyx: found pcm3052
[ 9.276123] snd-aoa-fabric-layout: can use this codec
[ 9.332145] snd-aoa-codec-onyx: attached to onyx codec via i2c
[ 9.354902] irq: irq 79 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 79
[ 9.354939] irq: irq 75 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 75
[ 9.354962] snd-aoa-codec-onyx: created and attached onyx instance
[ 9.432356] windfarm: Backside control loop started.
[ 9.484880] windfarm: Slots control loop started.
[ 9.607033] windfarm: Drive bay control loop started.
[ 10.020701] Adding 39536956k swap on /dev/sdb5. Priority:-1 extents:1 across:39536956k
[ 10.243954] EXT3 FS on sdb4, internal journal
[ 10.460149] loop: module loaded
[ 11.272993] irq: irq 8 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 32
[ 11.315710] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.015591] fuse init (API version 7.13)
[ 14.486912] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 14.508833] tg3: eth0: Flow control is on for TX and on for RX.
[ 14.525149] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.712199] Bluetooth: Core ver 2.15
[ 15.735177] NET: Registered protocol family 31
[ 15.747747] Bluetooth: HCI device and connection manager initialized
[ 15.760139] Bluetooth: HCI socket layer initialized
[ 15.888025] Bluetooth: L2CAP ver 2.14
[ 15.908962] Bluetooth: L2CAP socket layer initialized
[ 16.053963] Bluetooth: RFCOMM TTY layer initialized
[ 16.058467] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.058472] Bluetooth: BNEP filters: protocol multicast
[ 16.076664] Bridge firewalling registered
[ 16.132099] Bluetooth: RFCOMM socket layer initialized
[ 16.142291] Bluetooth: RFCOMM ver 1.11
[ 16.144935] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.144949] Bluetooth: SCO socket layer initialized
[ 18.418932] lp: driver loaded but no devices found
[ 19.072287] irq: irq 9 on host /u4@0,f8000000/mpic@f8040000 mapped to virtual irq 33
[ 19.117427] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.709764] Process Xorg (pid:1742) mapped non-existing PCI legacy memory for 00000:0a
[ 24.632940] eth0: no IPv6 routers present
Once you have filled out this report, mail it to submit@bugs.debian.org.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc64)
Kernel: Linux 2.6.32-trunk-powerpc64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--
G. Branden Robinson |
Free Software Developer | If I have seen further, it is
branden@deadbeast.net | because I am surrounded by midgets.
http://deadbeast.net/~branden/ |
Attachment:
signature.asc
Description: Digital signature