Your message dated Sun, 26 Aug 2007 14:42:54 -0400 with message-id <20070826184254.GA15199@kitenet.net> and subject line Bug#439245: installation-report: no problem on a Dell OptiPlex GX240 has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: no problem on a Dell OptiPlex GX240
- From: Luca Capello <luca@pca.it>
- Date: Thu, 23 Aug 2007 17:38:02 +0200
- Message-id: <[🔎] 87wsvmtg6d.fsf@gismo.pca.it>
Package: installation-reports Version: 2.29 Severity: minor Hello, the title speaks for me. Thx, bye, Gismo / Luca -- Package-specific info: Boot method: CD Image version: businesscard (20070817-09:47; d-i 20070816-19:04) Date: 2007/08/18 around 17:30+0200 Machine: Dell OptiPlex GX240 Partitions: luca@r-loupe:~$ /sbin/fdisk -l /dev/hda Disk /dev/hda: 20.5 GB, 20547841536 bytes 255 heads, 63 sectors/track, 2498 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 1020 8193118+ b W95 FAT32 /dev/hda2 1021 2498 11872035 f W95 Ext'd (LBA) /dev/hda5 1021 1895 7028406 b W95 FAT32 /dev/hda6 1896 2381 3903763+ 83 Linux /dev/hda7 2382 2498 939771 82 Linux swap / Solaris luca@r-loupe:~$ Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: Nothing more to say, except that repartitioning /dev/hda2 via partman (to have space for the / and swap partitions) was very simple. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="lenny (installer build 20070816-19:03)" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== umame -a: Linux r-loupe 2.6.21-2-486 #1 Wed Jul 11 03:17:09 UTC 2007 i686 unknown lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge [8086:1a30] (rev 03) lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge [8086:1a31] (rev 03) lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 12) lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 12) lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 [8086:244b] (rev 12) lspci -nn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB (Hub #1) [8086:2442] (rev 12) lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus [8086:2443] (rev 12) lspci -nn: 00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB (Hub #2) [8086:2444] (rev 12) lspci -nn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio [8086:2445] (rev 12) lspci -nn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128 Pro Ultra TF [1002:5446] lspci -nn: 02:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01) lspci -nn: 02:0c.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78) lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge [8086:1a30] (rev 03) lspci -vnn: Subsystem: Dell Unknown device [1028:010e] lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Memory at f4000000 (32-bit, prefetchable) [size=64M] lspci -vnn: Capabilities: [e4] Vendor Specific Information lspci -vnn: Capabilities: [a0] AGP version 2.0 lspci -vnn: lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge [8086:1a31] (rev 03) lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 64 lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 lspci -vnn: I/O behind bridge: 0000e000-0000efff lspci -vnn: Memory behind bridge: ff900000-ffafffff lspci -vnn: Prefetchable memory behind bridge: f8000000-fbffffff lspci -vnn: lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 12) lspci -vnn: Flags: bus master, fast devsel, latency 0 lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 lspci -vnn: I/O behind bridge: 0000d000-0000dfff lspci -vnn: Memory behind bridge: ff700000-ff8fffff lspci -vnn: Prefetchable memory behind bridge: 40000000-400fffff lspci -vnn: lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 12) lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 [8086:244b] (rev 12) (prog-if 80 [Master]) lspci -vnn: Subsystem: Dell Unknown device [1028:010e] lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] lspci -vnn: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] lspci -vnn: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] lspci -vnn: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] lspci -vnn: I/O ports at ffa0 [size=16] lspci -vnn: lspci -vnn: 00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB (Hub #1) [8086:2442] (rev 12) lspci -vnn: Subsystem: Dell Unknown device [1028:010e] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 19 lspci -vnn: I/O ports at ff80 [size=32] lspci -vnn: lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus [8086:2443] (rev 12) lspci -vnn: Subsystem: Dell Unknown device [1028:010e] lspci -vnn: Flags: medium devsel, IRQ 17 lspci -vnn: I/O ports at ccd0 [size=16] lspci -vnn: lspci -vnn: 00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB (Hub #2) [8086:2444] (rev 12) lspci -vnn: Subsystem: Dell Unknown device [1028:010e] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 18 lspci -vnn: I/O ports at ff60 [size=32] lspci -vnn: lspci -vnn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio [8086:2445] (rev 12) lspci -vnn: Subsystem: Dell Unknown device [1028:010e] lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 17 lspci -vnn: I/O ports at c800 [size=256] lspci -vnn: I/O ports at cc40 [size=64] lspci -vnn: lspci -vnn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128 Pro Ultra TF [1002:5446] lspci -vnn: Subsystem: ATI Technologies Inc Unknown device [1002:0409] lspci -vnn: Flags: stepping, 66MHz, medium devsel, IRQ 16 lspci -vnn: Memory at f8000000 (32-bit, prefetchable) [size=64M] lspci -vnn: I/O ports at ec00 [size=256] lspci -vnn: Memory at ff9fc000 (32-bit, non-prefetchable) [size=16K] lspci -vnn: Expansion ROM at ff900000 [disabled] [size=128K] lspci -vnn: Capabilities: [50] AGP version 2.0 lspci -vnn: Capabilities: [5c] Power Management version 2 lspci -vnn: lspci -vnn: 02:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01) lspci -vnn: Subsystem: Unknown device [464f:4285] lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 19 lspci -vnn: Memory at ff7ffc00 (32-bit, non-prefetchable) [size=512] lspci -vnn: lspci -vnn: 02:0c.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78) lspci -vnn: Subsystem: Dell Unknown device [1028:00fe] lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 18 lspci -vnn: I/O ports at dc80 [size=128] lspci -vnn: Memory at ff7ff800 (32-bit, non-prefetchable) [size=128] lspci -vnn: Expansion ROM at 40000000 [disabled] [size=128K] lspci -vnn: Capabilities: [dc] Power Management version 2 lspci -vnn: modulemap: 8086:244b piix modulemap: 8086:2442 uhci_hcd modulemap: 8086:2444 uhci_hcd modulemap: 10b7:9200 3c59x lsmod: Module Size Used by lsmod: sd_mod 19728 0 lsmod: ufs 70276 0 lsmod: qnx4 10756 0 lsmod: ntfs 197952 0 lsmod: nls_cp437 5760 0 lsmod: xfs 496244 0 lsmod: reiserfs 216704 0 lsmod: jfs 162780 0 lsmod: ext3 118024 1 lsmod: jbd 49704 1 ext3 lsmod: vfat 11648 0 lsmod: fat 47516 1 vfat lsmod: 3c59x 41768 0 lsmod: mii 5376 1 3c59x lsmod: nls_iso8859_1 4096 0 lsmod: isofs 32056 0 lsmod: ide_generic 1280 0 [permanent] lsmod: rz1000 2688 0 [permanent] lsmod: hpt34x 5120 0 [permanent] lsmod: jmicron 4096 0 [permanent] lsmod: cmd64x 10012 0 [permanent] lsmod: cs5535 4480 0 [permanent] lsmod: atiixp 6032 0 [permanent] lsmod: amd74xx 13468 0 [permanent] lsmod: pdc202xx_old 9472 0 [permanent] lsmod: opti621 4100 0 [permanent] lsmod: alim15x3 11660 0 [permanent] lsmod: it821x 7940 0 [permanent] lsmod: ns87415 4296 0 [permanent] lsmod: hpt366 15872 0 [permanent] lsmod: triflex 3712 0 [permanent] lsmod: siimage 11008 0 [permanent] lsmod: cs5530 5120 0 [permanent] lsmod: cy82c693 4356 0 [permanent] lsmod: sc1200 6656 0 [permanent] lsmod: sis5513 12808 0 [permanent] lsmod: serverworks 8328 0 [permanent] lsmod: trm290 4228 0 [permanent] lsmod: via82cxxx 8708 0 [permanent] lsmod: pdc202xx_new 7808 0 [permanent] lsmod: aec62xx 7040 0 [permanent] lsmod: cs5520 4608 0 [permanent] lsmod: slc90e66 5248 0 [permanent] lsmod: usb_storage 75456 0 lsmod: scsi_mod 133260 2 sd_mod,usb_storage lsmod: vga16fb 13068 2 lsmod: vgastate 8448 1 vga16fb lsmod: ide_cd 36384 0 lsmod: cdrom 32544 1 ide_cd lsmod: ide_disk 15488 3 lsmod: floppy 54180 0 lsmod: parport_pc 32292 0 lsmod: parport 32584 1 parport_pc lsmod: uhci_hcd 22032 0 lsmod: usbcore 120856 3 usb_storage,uhci_hcd lsmod: piix 9476 0 [permanent] lsmod: generic 4868 0 [permanent] lsmod: ide_core 112932 32 ide_generic,rz1000,hpt34x,jmicron,cmd64x,cs5535,atiixp,amd74xx,pdc202xx_old,opti621,alim15x3,it821x,ns87415,hpt366,triflex,siimage,cs5530,cy82c693,sc1200,sis5513,serverworks,trm290,via82cxxx,pdc202xx_new,aec62xx,cs5520,slc90e66,usb_storage,ide_cd,ide_disk,piix,generic df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 387996 28 387968 0% /dev df: tmpfs 387996 28 387968 0% /dev df: tmpfs 387996 28 387968 0% /.dev df: /dev/hda6 3842376 2322472 1324716 64% /target free: total used free shared buffers free: Mem: 775992 756220 19772 0 59936 free: Swap: 939760 0 939760 free: Total: 1715752 756220 959532 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 15 /proc/cpuinfo: model : 1 /proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 1.50GHz /proc/cpuinfo: stepping : 2 /proc/cpuinfo: cpu MHz : 1495.197 /proc/cpuinfo: cache size : 256 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 2 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm /proc/cpuinfo: bogomips : 2993.16 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-006f : keyboard /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:1f.1 /proc/ioports: 0170-0177 : ide1 /proc/ioports: 01f0-01f7 : 0000:00:1f.1 /proc/ioports: 01f0-01f7 : ide0 /proc/ioports: 02f8-02ff : serial /proc/ioports: 0376-0376 : 0000:00:1f.1 /proc/ioports: 0376-0376 : ide1 /proc/ioports: 0378-037a : parport0 /proc/ioports: 03c0-03df : vga+ /proc/ioports: 03f2-03f5 : floppy /proc/ioports: 03f6-03f6 : 0000:00:1f.1 /proc/ioports: 03f6-03f6 : ide0 /proc/ioports: 03f7-03f7 : floppy DIR /proc/ioports: 03f8-03ff : serial /proc/ioports: 0778-077a : parport0 /proc/ioports: 0800-087f : 0000:00:1f.0 /proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK /proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK /proc/ioports: 0808-080b : ACPI PM_TMR /proc/ioports: 0828-082b : ACPI GPE0_BLK /proc/ioports: 0880-08bf : 0000:00:1f.0 /proc/ioports: 0c00-0c7f : pnp 00:00 /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: c800-c8ff : 0000:00:1f.5 /proc/ioports: cc40-cc7f : 0000:00:1f.5 /proc/ioports: ccd0-ccdf : 0000:00:1f.3 /proc/ioports: d000-dfff : PCI Bus #02 /proc/ioports: dc80-dcff : 0000:02:0c.0 /proc/ioports: e000-efff : PCI Bus #01 /proc/ioports: ec00-ecff : 0000:01:00.0 /proc/ioports: ff60-ff7f : 0000:00:1f.4 /proc/ioports: ff60-ff7f : uhci_hcd /proc/ioports: ff80-ff9f : 0000:00:1f.2 /proc/ioports: ff80-ff9f : uhci_hcd /proc/ioports: ffa0-ffaf : 0000:00:1f.1 /proc/ioports: ffa0-ffa7 : ide0 /proc/ioports: ffa8-ffaf : ide1 /proc/iomem: 00000000-0009ffff : System RAM /proc/iomem: 00000000-00000000 : Crash kernel /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-2ff76fff : System RAM /proc/iomem: 00100000-00297564 : Kernel code /proc/iomem: 00297565-00338cf3 : Kernel data /proc/iomem: 2ff77000-2ff78fff : ACPI Non-volatile Storage /proc/iomem: 2ff79000-2fffffff : reserved /proc/iomem: 40000000-400fffff : PCI Bus #02 /proc/iomem: 40000000-4001ffff : 0000:02:0c.0 /proc/iomem: f4000000-f7ffffff : 0000:00:00.0 /proc/iomem: f8000000-fbffffff : PCI Bus #01 /proc/iomem: f8000000-fbffffff : 0000:01:00.0 /proc/iomem: fec00000-fec0ffff : reserved /proc/iomem: fee00000-fee0ffff : reserved /proc/iomem: ff700000-ff8fffff : PCI Bus #02 /proc/iomem: ff7ff800-ff7ff87f : 0000:02:0c.0 /proc/iomem: ff7ffc00-ff7ffdff : 0000:02:0a.0 /proc/iomem: ff900000-ffafffff : PCI Bus #01 /proc/iomem: ff900000-ff91ffff : 0000:01:00.0 /proc/iomem: ff9fc000-ff9fffff : 0000:01:00.0 /proc/iomem: ffb00000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 62 IO-APIC-edge timer /proc/interrupts: 1: 394 IO-APIC-edge i8042 /proc/interrupts: 2: 0 XT-PIC-XT cascade /proc/interrupts: 6: 8 IO-APIC-edge floppy /proc/interrupts: 7: 0 IO-APIC-edge parport0 /proc/interrupts: 12: 3 IO-APIC-edge i8042 /proc/interrupts: 14: 358389 IO-APIC-edge ide0 /proc/interrupts: 15: 1237 IO-APIC-edge ide1 /proc/interrupts: 18: 669408 IO-APIC-fasteoi uhci_hcd:usb2, eth0 /proc/interrupts: 19: 0 IO-APIC-fasteoi uhci_hcd:usb1 /proc/interrupts: NMI: 0 /proc/interrupts: LOC: 1089940 /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 775992 kB /proc/meminfo: MemFree: 19804 kB /proc/meminfo: Buffers: 59936 kB /proc/meminfo: Cached: 637716 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 211380 kB /proc/meminfo: Inactive: 497776 kB /proc/meminfo: SwapTotal: 939760 kB /proc/meminfo: SwapFree: 939760 kB /proc/meminfo: Dirty: 820 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 11544 kB /proc/meminfo: Mapped: 3072 kB /proc/meminfo: Slab: 37876 kB /proc/meminfo: SReclaimable: 28944 kB /proc/meminfo: SUnreclaim: 8932 kB /proc/meminfo: PageTables: 272 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: CommitLimit: 1327756 kB /proc/meminfo: Committed_AS: 15928 kB /proc/meminfo: VmallocTotal: 253648 kB /proc/meminfo: VmallocUsed: 6928 kB /proc/meminfo: VmallocChunk: 246044 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 65: dmidecode: not found ============================================== Installer status: ============================================== Package: kernel-image-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: preseed-common Status: install ok unpacked Version: 1.30 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.06 Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.51) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 1.41 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 1000 Package: acpi-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: acpi-modules Depends: kernel-image-2.6.21-2-486-di Description: ACPI support modules Package: cdrom-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: cdrom-modules Depends: ide-modules-2.6.21-2-486-di, cdrom-core-modules-2.6.21-2-486-di, kernel-image-2.6.21-2-486-di Description: Esoteric CDROM drivers Package: libnss-dns-udeb Status: install ok unpacked Version: 2.6.1-1 Description: GNU C Library: NSS helper for DNS - udeb Package: cdrom-checker Status: install ok unpacked Version: 1.12 Depends: cdrom-detect, cdebconf-udeb (>= 0.31) Description: Verify the cd contents Installer-Menu-Item: 94000 Package: lowmemcheck Status: install ok unpacked Version: 1.26 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: cdrom-retriever Status: install ok installed Version: 1.15 Provides: retriever Depends: cdebconf-udeb, cdrom-detect Description: Fetch modules from a CDROM Package: main-menu Status: install ok unpacked Version: 1.20 Depends: libc6 (>= 2.5-5), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.51), cdebconf-udeb Description: Debian installer main menu Package: ide-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: ide-modules Depends: kernel-image-2.6.21-2-486-di, ide-core-modules-2.6.21-2-486-di Description: IDE drivers Package: di-utils-shell Status: install ok installed Version: 1.49 Depends: cdebconf-udeb, di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 95000 Package: di-utils Status: install ok installed Version: 1.49 Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52), cdebconf-udeb Description: Miscellaneous utilities for the debian installer Package: fat-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: fat-modules Depends: kernel-image-2.6.21-2-486-di Description: FAT filesystem support Package: ide-core-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: ide-core-modules Depends: kernel-image-2.6.21-2-486-di Description: IDE support Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.119 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.5-5), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: module-init-tools-udeb Status: install ok unpacked Version: 3.3-pre11-4 Depends: libc6 (>= 2.5-5) Description: tools for managing Linux kernel modules Package: rootskel Status: install ok installed Version: 1.54 Depends: di-utils (>= 1.43), cdebconf-udeb Description: Skeleton root filesystem used by debian-installer Package: sata-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: sata-modules Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, ata-modules-2.6.21-2-486-di Description: SATA drivers Package: udev-udeb Status: install ok unpacked Version: 0.114-2 Depends: libc6 (>= 2.6-1) Description: /dev/ and hotplug management daemon Package: scsi-common-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: scsi-common-modules Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, cdrom-core-modules-2.6.21-2-486-di Description: Very common SCSI drivers Package: brltty-udeb Status: install ok unpacked Version: 3.7.2-7.2 Depends: libc6 (>= 2.6-1) Description: Access software for a blind person using a soft braille terminal Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-4 Depends: libc6 (>= 2.3.6-6) Description: Free Implementation of the Unicode BiDi algorithm Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-5 Depends: libc6 (>= 2.3.6-6) Description: text-wrapping library with i18n - runtime udeb Package: auto-install Status: install ok unpacked Version: 1.1 Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18) Description: Support for automatic installs Installer-Menu-Item: 1900 Package: floppy-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: floppy-modules Depends: kernel-image-2.6.21-2-486-di Description: Floppy driver Package: input-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: input-modules Depends: kernel-image-2.6.21-2-486-di, usb-modules-2.6.21-2-486-di Description: Input devices support Package: rescue-check Status: install ok unpacked Version: 1.11 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 2.0.6-2 Provides: editor Depends: libc6 (>= 2.5-5), libslang2-udeb (>= 2.0.6-3) Description: free Pico clone with some new features - tiny build Package: usb-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: usb-modules Depends: kernel-image-2.6.21-2-486-di Description: USB support Package: cdebconf-udeb Status: install ok installed Version: 0.119 Provides: debconf-2.0 Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: ai-choosers Status: install ok unpacked Version: 1.1 Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23) Description: Delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 2200 Package: load-cdrom Status: install ok installed Version: 1.15 Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07) Description: Load installer components from CD Installer-Menu-Item: 1600 Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.119 Depends: cdebconf-udeb, libc6 (>= 2.5-5) Description: Plain text frontend for Debian Configuration Management System Package: iso-3166-udeb Status: install ok installed Version: 1.3-1 Description: provides iso_3166.tab file Package: firewire-core-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: firewire-core-modules Depends: scsi-core-modules-2.6.21-2-486-di, kernel-image-2.6.21-2-486-di Description: Core FireWire drivers Package: core-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: core-modules Depends: kernel-image-2.6.21-2-486-di Description: Core modules Package: floppy-retriever Status: install ok unpacked Version: 1.15 Provides: retriever Depends: cdebconf-udeb, mountfloppy Description: Fetches modules from a floppy Package: ethdetect Status: install ok installed Version: 1.54 Provides: ethernet-card-detection Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 1700 Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-5 Depends: libc6 (>= 2.5-5) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.30 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: ata-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: ata-modules Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di Description: ATA disk modules. Package: libiw29-udeb Status: install ok installed Version: 29~pre22-1 Depends: libc6 (>= 2.5-5) Description: Tools for manipulating Linux Wireless Extensions Package: archdetect Status: install ok installed Version: 1.54 Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52) Description: Hardware architecture detector Package: scsi-core-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: scsi-core-modules Depends: kernel-image-2.6.21-2-486-di Description: Core SCSI subsystem Package: save-logs Status: install ok unpacked Version: 2.31 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 94000 Package: scsi-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: scsi-modules Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, parport-modules-2.6.21-2-486-di, cdrom-core-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di Description: SCSI drivers Package: di-utils-reboot Status: install ok unpacked Version: 1.49 Depends: cdebconf-udeb Description: Reboot Installer-Menu-Item: 99500 Package: anna Status: install ok installed Version: 1.27 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: fb-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: fb-modules Depends: kernel-image-2.6.21-2-486-di Description: Frame buffer support Package: libsysfs2-udeb Status: install ok unpacked Version: 2.1.0-2+b1 Depends: libc6 (>= 2.5-5) Description: interface library to sysfs Package: pcmciautils-udeb Status: install ok unpacked Version: 014-3 Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb Description: PCMCIA utilities for Linux 2.6 Package: pciutils-udeb Status: install ok unpacked Version: 1:2.2.4-1 Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2:1.02-2 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.49 Description: Terminfo entries needed by newt/slang in debian installer Package: usb-serial-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: usb-serial-modules Depends: kernel-image-2.6.21-2-486-di, usb-modules-2.6.21-2-486-di Description: USB serial drivers Package: pcmcia-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: pcmcia-modules Depends: kernel-image-2.6.21-2-486-di, core-modules-2.6.21-2-486-di Description: Common PCMCIA drivers Package: hw-detect Status: install ok installed Version: 1.54 Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.48) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.36 Provides: keyboard-setup Depends: libc6 (>= 2.6-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.52), cdebconf-udeb, console-keymaps Description: Detect a keyboard and select layout Installer-Menu-Item: 1200 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.52 Depends: libc6 (>= 2.5-5) Description: Library of common debian-installer functions Package: parport-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: parport-modules Depends: kernel-image-2.6.21-2-486-di Description: Parallel port support Package: installation-locale Status: install ok unpacked Version: 1.2 Depends: rootskel Description: UTF-8 C locale Package: env-preseed Status: install ok unpacked Version: 1.30 Description: debconf preseeding via environment variables Package: mountfloppy Status: install ok unpacked Version: 0.12 Depends: cdebconf-udeb, di-utils (>= 1.48) Description: Mounts a floppy Package: cdebconf-priority Status: install ok unpacked Version: 0.119 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 93000 Package: netcfg Status: install ok installed Version: 1.39 Provides: configured-network Depends: libc6 (>= 2.6-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.52), libiw29-udeb (>= 28+29pre7), dhcp3-client-udeb | dhcp-client-udeb | pump-udeb, ethernet-card-detection Description: Configure the network Installer-Menu-Item: 1800 Package: file-preseed Status: install ok unpacked Version: 1.30 Depends: cdebconf-udeb, di-utils, preseed-common Description: load debconf preseed file Installer-Menu-Item: 1400 Package: zlib1g-udeb Status: install ok unpacked Version: 1:1.2.3.3.dfsg-5 Description: compression library - runtime for Debian installer Package: serial-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: serial-modules Depends: kernel-image-2.6.21-2-486-di, pcmcia-modules-2.6.21-2-486-di Description: Serial drivers Package: usb-storage-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: usb-storage-modules Depends: ide-core-modules-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, usb-modules-2.6.21-2-486-di Description: USB storage support Package: pcmcia-storage-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: pcmcia-storage-modules Depends: kernel-image-2.6.21-2-486-di, ide-core-modules-2.6.21-2-486-di, cdrom-core-modules-2.6.21-2-486-di, pcmcia-modules-2.6.21-2-486-di, ata-modules-2.6.21-2-486-di Description: PCMCIA storage drivers Package: libdebconfclient0-udeb Status: install ok installed Version: 0.119 Depends: libc6 (>= 2.5-5), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.5 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: cdrom-detect Status: install ok installed Version: 1.24 Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.48) Description: Detect CDROM devices and mount the CD Installer-Menu-Item: 1300 Package: cdrom-core-modules-2.6.21-2-486-di Status: install ok unpacked Version: 1.53 Provides: cdrom-core-modules Depends: kernel-image-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di, ide-modules-2.6.21-2-486-di Description: CDROM support Package: debian-installer Status: install ok installed Version: cdrom-isolinux-20070816-19:04 Description: debian installation image Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 192 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.25 Depends: choose-mirror-bin, cdebconf-udeb Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.25 Depends: apt-mirror-setup, installed-base, cdebconf-udeb Description: Configure apt Installer-Menu-Item: 7000 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 148 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.83 Depends: di-utils-mapdevfs, di-utils (>= 1.48), rootskel (>= 1.19) Description: base system installation framework Package: bootstrap-base Status: install ok installed Priority: required Section: debian-installer Installed-Size: 488 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.83 Depends: libc6 (>= 2.6-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.52), mounted-partitions, created-fstab, base-installer, debootstrap-udeb (>= 0.3.1), gpgv-udeb, debian-archive-keyring-udeb, archdetect Provides: kernel-installer, installed-base Description: Install the base system Installer-Menu-Item: 6500 Package: choose-mirror Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 12 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2.18 Depends: configured-network, choose-mirror-bin Description: Choose mirror to install from (menu item) Installer-Menu-Item: 2300 Package: choose-mirror-bin Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 324 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2.18 Depends: libc6 (>= 2.6-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.52), cdebconf-udeb Description: Choose mirror to install from (program) Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 92 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.91 Depends: cdebconf-udeb, tzsetup-udeb (>= 1:0.18), configured-network, rdate-udeb (>= 1:1.1.2-5), di-utils Description: set up clock Installer-Menu-Item: 2600 Package: crc-modules-2.6.21-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: crc-modules Description: CRC modules This package contains CRC support modules. Package: debian-archive-keyring-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Michael Vogt <mvo@debian.org> Version: 2007.07.31 Recommends: gpgv-udeb Description: GnuPG keys of the Debian archive The Debian project digitally signs its Release files. This package contains the archive keys used for that, in a minimal form for use in the installer. Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.0.2 Depends: libc6 (>= 2.6-1), mounted-partitions Description: Bootstrap the Debian system Package: dhcp3-client-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 372 Maintainer: Eloy A. Paris <peloy@debian.org> Version: 3.0.6-1 Depends: libc6 (>= 2.6-1) Description: DHCP Client for debian-installer dhcp-client-udeb is a minimal dhcp package used by the debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 4 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.49 Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.54 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 3500 Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 396 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.40.2-1 Depends: libblkid1-udeb, libc6 (>= 2.5-5) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: efi-modules-2.6.21-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 44 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: efi-modules Description: EFI modules This package contains EFI modules. Package: eject-udeb Status: install ok unpacked Priority: optional Section: debian-installer Installed-Size: 212 Maintainer: Frank Lichtenheld <djpig@debian.org> Version: 2.1.5-4 Depends: libc6 (>= 2.6-1), cdebconf-udeb Description: ejects CDs from d-i menu Installer-Menu-Item: 96000 Package: elilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 100 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.11 Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules Provides: bootable-system Description: Install elilo on a hard disk Installer-Menu-Item: 7600 Package: ext3-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 244 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: fdisk-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 160 Maintainer: LaMont Jones <lamont@debian.org> Version: 2.13~rc3-5 Depends: libc6 (>= 2.6-1) Description: Partition a hard drive (manual) fdisk package Package: finish-install Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2.12 Depends: cdebconf-udeb, archdetect, installed-base, created-fstab, bootable-system Description: Finish the installation and reboot Installer-Menu-Item: 7800 Package: gpgv-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 256 Maintainer: James Troup <james@nocrew.org> Version: 1.4.6-2 Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1) Description: minimal signature verification tool GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . This is GnuPG's signature verification tool, gpgv, packaged in minimal form for use in debian-installer. Package: grub-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 352 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.25 Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, partman-utils Provides: bootable-system Description: Install GRUB on a hard disk Installer-Menu-Item: 7300 Package: jfs-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 224 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: jfs-modules Description: JFS filesystem support This package contains the JFS filesystem module for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 984 Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de> Version: 1.1.11-1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 40 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.40.2-1 Depends: libc6 (>= 2.5-5) Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 1804 Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org> Version: 2.6.1-1 Provides: libc6, libc-udeb, glibc-2.6-1 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libcrypto0.9.8-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 1312 Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org> Version: 0.9.8e-6 Depends: libc6 (>= 2.6-1), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1) Description: crypto shared library - udeb libcrypto shared library. . Do not install it on a normal system. Package: libdevmapper1.02.1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 84 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2:1.02.20-2 Depends: libc6 (>= 2.5-5) Provides: libdevmapper1.02.1 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libnss-files-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 40 Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org> Version: 2.6.1-1 Description: GNU C Library: NSS helper for files - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains the files NSS helper needed for the Debian installer. Do not install it on a normal system. Package: libparted1.7-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 340 Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org> Version: 1.7.1-5.1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Provides: libparted1.7-1 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 20 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.40.2-1 Depends: libc6 (>= 2.5-5) Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's). See RFC 4122 for more information. . This is a minimal package for debian-installer. Package: lilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 216 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.23 Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober Provides: bootable-system Description: Install LILO on a hard disk Installer-Menu-Item: 7500 Package: loop-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 440 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2.02.26-1+b1 Depends: libc6 (>= 2.6-1), libdevmapper1.02.1-udeb (>= 2:1.02.20) Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: md-modules-2.6.21-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 460 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 160 Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org> Version: 2.6.2-2 Depends: libc6 (>= 2.5-5) Description: tool to administer Linux MD arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD arrays (e.g. software RAID, multipath devices). . mdadm-udeb is a minimal package used by the debian-installer. Package: mdcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 412 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.22 Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions Description: Configure MD devices Use this module to configure the MD devices. Package: mkreiserfs-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Ed Boraas <ed@debian.org> Version: 1:3.6.19-6 Depends: libc6 (>= 2.6-1), libuuid1-udeb Description: User-level tools for ReiserFS filesystems This installer module contains the utility to create ReiserFS filesystems. . Homepage: http://www.namesys.com/ Package: network-console Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 204 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.12 Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1) Description: Continue installation remotely using SSH Installer-Menu-Item: 2100 Package: network-preseed Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 40 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.30 Depends: cdebconf-udeb, configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 2100 Package: nic-extra-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 2916 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di, crc-modules-2.6.21-2-486-di Provides: nic-extra-modules Description: Rare NIC drivers This package contains rare NIC drivers for the Linux kernel. Package: nic-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 460 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di, firewire-core-modules-2.6.21-2-486-di Provides: nic-modules Description: Common NIC drivers This package contains common NIC drivers for the Linux kernel. Package: nic-pcmcia-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 588 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, nic-wireless-modules-2.6.21-2-486-di, pcmcia-modules-2.6.21-2-486-di Provides: nic-pcmcia-modules Description: Common PCMCIA NIC drivers This package contains common PCMCIA NIC drivers for the Linux kernel. Package: nic-shared-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 56 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: nic-shared-modules Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-extra-modules, nic-pcmcia-modules, and nic-wireless-modules. Package: nic-usb-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 316 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, nic-wireless-modules-2.6.21-2-486-di, usb-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di Provides: nic-usb-modules Description: USB NIC drivers This package contains USB network adapter drivers for the Linux kernel. Package: nic-wireless-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 836 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di, nic-shared-modules-2.6.21-2-486-di, core-modules-2.6.21-2-486-di Provides: nic-wireless-modules Description: Wireless NIC drivers This package contains wireless NIC drivers for the Linux kernel. Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 188 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.19 Depends: cdebconf-udeb, installed-base, di-utils-mapdevfs Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 7700 Package: ntfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 244 Maintainer: David Martínez Moreno <ender@debian.org> Version: 1.13.1-6+b2 Depends: libc6 (>= 2.3.6-6) Provides: ntfstools-udeb Description: Tools for doing neat things in NTFS partitions from Linux - udeb Currently this udeb contains only ntfsresize. Package: openssh-server-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 320 Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org> Version: 1:4.6p1-5 Depends: libc6 (>= 2.6-1), libcrypto0.9.8-udeb (>= 0.9.8e-1), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1), libnss-files-udeb Description: secure shell server for the Debian installer This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . This package provides the sshd server for use in debian-installer. Since it is expected to be used in specialized situations (e.g. S/390 installs with no console), it does not provide any configuration. Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 76 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.21 Depends: di-utils-mapdevfs, anna (>= 1.16) Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: partconf-find-partitions Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.24 Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.52), libparted1.7-udeb (>= 1.7.1-1) Description: debian-installer utility for finding partitions Helper program for finding partitions and detecting their size and existing file system. Package: parted-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 68 Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org> Version: 1.7.1-5.1 Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1) Provides: parted Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 388 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 69 Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-auto-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 5 Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87) Description: Automatically partition storage devices using crypto and LVM Package: partman-auto-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 164 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 23 Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 69), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb Description: Automatically partition storage devices using LVM Package: partman-auto-raid Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 68 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 5 Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md Description: Allow preseeded RAID installs Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 764 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 109 Depends: libc6 (>= 2.5-5), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-utils, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15) Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab Description: Partition the storage devices (partman) Installer-Menu-Item: 4200 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 604 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 55 Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 35 Depends: cdebconf-udeb Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 884 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 22 Depends: partman-base (>= 106), libc6 (>= 2.6-1), cdebconf-udeb Description: Add to partman support for block device encryption Package: partman-efi Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 136 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 13 Depends: partman-base, efi-modules Description: Add to partman support for EFI boot partitions Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 232 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 47 Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-jfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 276 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 22 Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add support for jfs to partman Package: partman-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 732 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 54 Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb Description: Adds support for LVM to partman Package: partman-md Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 36 Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87) Description: Add to partman support for MD Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 300 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 51 Depends: e2fsprogs-udeb, ntfsprogs-udeb, cdebconf-udeb Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-reiserfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 240 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 36 Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for reiserfs Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 324 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 51 Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-utils Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 8 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 109 Depends: libc6 (>= 2.5-5), libparted1.7-udeb (>= 1.7.1-1) Description: Utilities related to partitioning Package: partman-xfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 228 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 34 Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for xfs Package: pata-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 176 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di, ata-modules-2.6.21-2-486-di Provides: pata-modules Description: PATA drivers This package contains PATA drivers for the Linux kernel. Package: pkgsel Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.14 Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 7000 Package: rdate-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 28 Maintainer: Anibal Monsalve Salazar <anibal@debian.org> Version: 1:1.1.2-5 Depends: libc6 (>= 2.6-1) Description: sets the system's date from a remote host Package: reiserfs-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 276 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: reiserfs-modules Description: Reiser filesystem support This package contains the Reiser filesystem module for the Linux kernel. Package: scsi-extra-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 1784 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: scsi-modules-2.6.21-2-486-di, scsi-core-modules-2.6.21-2-486-di Provides: scsi-extra-modules Description: Uncommon SCSI drivers This package contains uncommon SCSI drivers for the Linux kernel. This includes SCSI RAID drivers, and some of the less common SCSI controllers. Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 296 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.18 Depends: cdebconf-udeb, localechooser Description: choose time zone Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 360 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 6900 Package: wireless-tools-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 28 Maintainer: Guus Sliepen <guus@debian.org> Version: 29~pre22-1 Depends: libc6 (>= 2.5-5), libiw29-udeb (>= 28+29pre7) Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools. Package: xfs-modules-2.6.21-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 580 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: xfs-modules Description: XFS filesystem support This package contains the XFS filesystem module for the Linux kernel. Package: xfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 240 Maintainer: Nathan Scott <nathans@debian.org> Version: 2.9.0-1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: A stripped-down version of xfsprogs, for debian-installer This package is an xfsprogs package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: ntfs-modules-2.6.21-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 268 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: ntfs-modules Description: NTFS filesystem support This package contains the NTFS file system module for the Linux kernel. Package: qnx4-modules-2.6.21-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: qnx4-modules Description: QNX4 filesystem support This package contains the QNX4 filesystem module for the Linux kernel. Package: ufs-modules-2.6.21-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 112 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.53 Depends: kernel-image-2.6.21-2-486-di Provides: ufs-modules Description: UFS filesystem support This package contains the UFS filesystem module for the Linux kernel. -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-5-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities ii reportbug 3.31 reports bugs in the Debian distrib -- no debconf information -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.22-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:2.2.4-1 Linux PCI Utilities ii reportbug 3.39 reports bugs in the Debian distrib -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 439245-done@bugs.debian.org
- Subject: Re: Bug#439245: installation-report: no problem on a Dell OptiPlex GX240
- From: Joey Hess <joeyh@debian.org>
- Date: Sun, 26 Aug 2007 14:42:54 -0400
- Message-id: <20070826184254.GA15199@kitenet.net>
- In-reply-to: <[🔎] 87wsvmtg6d.fsf@gismo.pca.it>
- References: <[🔎] 87wsvmtg6d.fsf@gismo.pca.it>
Closing this successfu installation report. Thanks for reporting! -- see shy joAttachment: signature.asc
Description: Digital signature
--- End Message ---