Bug#377504: installation-report: problem pick'n'mix, mostly RAID-related
Package: installation-reports
Version: 2.14
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-businesscard.iso [2006-07-08, +/-1 because of TZ]
Date: 2006-07-08 and 09, multiple tries
Machine: Custom-built fileserver
Partitions:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 499 1471 7815622+ fd Linux raid autodetect [/]
/dev/sda2 1 498 4000153+ fd Linux raid autodetect [swap]
/dev/sda3 1472 60801 476568225 fd Linux raid autodetect [/home]
Partition table entries are not in disk order
[/dev/sdb is identical, the disks are spanned by 3x RAID1]
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it [~] = glitches
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [~]
Detect hard drives: [E]
Partition hard drives: [E]
Create file systems: [~]
Mount partitions: [O]
Install base system: [~]
Install boot loader: [E]
Installed system ok: [~]
Comments/Problems:
It took me quite a lot of tries to get so far as to be able to send this report,
so this is in no particular order:
GENERAL PROBLEMS / GLITCHES
1) debconf priority is set to high _after_ the install even when installed using 'expert'
I've had too many non-working defaults with high, so I'd probably default it to medium
even for normal installs. For 'expert' installs the default should be low however, since
the installation itself is done with 'low' also.
2) Where has the 'state of the install' detection between steps gone?
The installer generation before debian-installer tried to determine the state of
an install before and / or after each step. This allowed resuming of installs at
near-arbitrary points and did excellently at detecting changes made manually via
the console.
The current installer seems to just check STEP_XY_COMPLETED flags, making it much
more difficult to work around deficiencies in the installer. There also was no sign
of a resume capability.
3) Hardware detection was excellent, but ...
It prompted me to load the 'floppy' module three times during each install. The box doesn't
have a floppy but the controller is enabled, so the confusion is understandable. Nevertheless,
deselecting the module once should be enough.
4) The 'back' functions in installer dialogs doesn't always work correctly
Most notably the item 'Install the base system' gives a choice of kernels at the end.
Once I selected the wrong one, but the back button didn't take me back to kernel
selection but before the whole base system install, which was not marked as not completed.
Consequently I had to redo the whole step, including download and install of the base system,
since everything depending on that step complained.
I suggest splitting a 'Select kernel' step from the 'base system' step.
Similar things, like 'back' just looping back to the same dialog happened at various points
5) Unable to change the time zone.
Detecting the TZ based on the selected country is neat, but in expert mode at least
I'd like to have an option to correct the guess. All the 'timezone' module does is
show the automatically chosen TZ.
Also, the 'clock in UTC' question should have an 'is this correct' dialog which shows
the output of date or similar.
RAID / PARTITIONING related
1) partitionable arrays not supported [also posted seperately to debian-boot]
At first I created partitionable arrays using the console, but partman totally choked
on that. After a lot of experimenting I finally failed at the 'install grub' step.
It didn't want anything to do with /dev/md_d0, even with the install device given as (hd0)
It also didn't copy the grub stages to /target/boot/ because of that.
2) partman or mdcfg for RAID?
In my next few attempts I loaded the mdcfg module and tried to create the RAIDs with
mdcfg. However that module insists on the partitioning step being completed. And the
partitioning step refuses to complete without a root fs defined ... impossible to put
root on RAID that way.
Then I saw that partman has its own configure RAID item, that called mdcfg without insisting
on a root fs ... having two ways to setup RAID, with the obvious one not working for root-on-
RAID is confusing.
3) mdcfg should support bitmaps
There is no option to set --bitmap internal for an array in mdcfg, but I see no reason to
create one without.
4) mdcfg interface improvements
How about grouping eligible partitions with approximately the same size together on one
line, to make it easier to select the correct disks?
5) mdcfg creates arrays out-of-order
Interestingly the three arrays I created got: md2, md0, md1.
I then recreated them manually as md1, md2, md3 (deliberately skipping 0 to match the
partition numbers). On boot md1 was moved to md0 however and the boot failed. (Not an
installer bug but I thought mds remembered their minor number.)
6) partman sanity checks too strict
If I want to partition and return to the main menu without designating a root fs
I should be able to do that. If I want to exit partman without changing anything
I should be able to do that. Instead it forces me to write an unchanged partition
layout, and happily formats the swap space (again).
To be honest, I'd rather be dropped into fdisk of cfdisk.
The End ... for now.
Thanks,
Christian
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Hardware information for running system:
==============================================
umame -a: Linux jesus 2.6.15-1-em64t-p4-smp #2 SMP Mon Mar 20 12:55:47 UTC 2006 x86_64 GNU/Linux
/proc/pci: PCI devices found:
/proc/pci: Bus 0, device 0, function 0:
/proc/pci: Class 0600: PCI device 8086:2778 (rev 0).
/proc/pci: Bus 0, device 28, function 0:
/proc/pci: Class 0604: PCI device 8086:27d0 (rev 1).
/proc/pci: IRQ 16.
/proc/pci: Master Capable. No bursts. Min Gnt=3.
/proc/pci: Bus 0, device 28, function 4:
/proc/pci: Class 0604: PCI device 8086:27e0 (rev 1).
/proc/pci: IRQ 16.
/proc/pci: Master Capable. No bursts. Min Gnt=3.
/proc/pci: Bus 0, device 28, function 5:
/proc/pci: Class 0604: PCI device 8086:27e2 (rev 1).
/proc/pci: IRQ 17.
/proc/pci: Master Capable. No bursts. Min Gnt=3.
/proc/pci: Bus 0, device 29, function 0:
/proc/pci: Class 0c03: PCI device 8086:27c8 (rev 1).
/proc/pci: IRQ 19.
/proc/pci: I/O at 0x3080 [0x309f].
/proc/pci: Bus 0, device 29, function 1:
/proc/pci: Class 0c03: PCI device 8086:27c9 (rev 1).
/proc/pci: IRQ 20.
/proc/pci: I/O at 0x3060 [0x307f].
/proc/pci: Bus 0, device 29, function 2:
/proc/pci: Class 0c03: PCI device 8086:27ca (rev 1).
/proc/pci: IRQ 18.
/proc/pci: I/O at 0x3040 [0x305f].
/proc/pci: Bus 0, device 29, function 3:
/proc/pci: Class 0c03: PCI device 8086:27cb (rev 1).
/proc/pci: IRQ 17.
/proc/pci: I/O at 0x3020 [0x303f].
/proc/pci: Bus 0, device 29, function 7:
/proc/pci: Class 0c03: PCI device 8086:27cc (rev 1).
/proc/pci: IRQ 19.
/proc/pci: Non-prefetchable 32 bit memory at 0x88a00400 [0x88a007ff].
/proc/pci: Bus 0, device 30, function 0:
/proc/pci: Class 0604: PCI device 8086:244e (rev 225).
/proc/pci: Master Capable. No bursts. Min Gnt=11.Max Lat=1.
/proc/pci: Bus 0, device 31, function 0:
/proc/pci: Class 0601: PCI device 8086:27b8 (rev 1).
/proc/pci: Bus 0, device 31, function 1:
/proc/pci: Class 0101: PCI device 8086:27df (rev 1).
/proc/pci: IRQ 18.
/proc/pci: I/O at 0x30b0 [0x30bf].
/proc/pci: Bus 0, device 31, function 2:
/proc/pci: Class 0106: PCI device 8086:27c1 (rev 1).
/proc/pci: IRQ 20.
/proc/pci: I/O at 0x30c8 [0x30cf].
/proc/pci: I/O at 0x30e4 [0x30e7].
/proc/pci: I/O at 0x30c0 [0x30c7].
/proc/pci: I/O at 0x30e0 [0x30e3].
/proc/pci: I/O at 0x30a0 [0x30af].
/proc/pci: Non-prefetchable 32 bit memory at 0x88a00000 [0x88a003ff].
/proc/pci: Bus 0, device 31, function 3:
/proc/pci: Class 0c05: PCI device 8086:27da (rev 1).
/proc/pci: IRQ 11.
/proc/pci: I/O at 0x3000 [0x301f].
/proc/pci: Bus 3, device 0, function 0:
/proc/pci: Class 0200: PCI device 8086:108b (rev 3).
/proc/pci: IRQ 16.
/proc/pci: Non-prefetchable 32 bit memory at 0x88900000 [0x8891ffff].
/proc/pci: I/O at 0x2000 [0x201f].
/proc/pci: Bus 4, device 0, function 0:
/proc/pci: Class 0100: PCI device 9005:0080 (rev 2).
/proc/pci: IRQ 21.
/proc/pci: Master Capable. Latency=64. Min Gnt=40.Max Lat=25.
/proc/pci: I/O at 0x1100 [0x11ff].
/proc/pci: Non-prefetchable 64 bit memory at 0x88850000 [0x88850fff].
/proc/pci: Bus 4, device 1, function 0:
/proc/pci: Class 0104: PCI device 13c1:1001 (rev 1).
/proc/pci: IRQ 22.
/proc/pci: Master Capable. Latency=64. Min Gnt=9.
/proc/pci: I/O at 0x1240 [0x124f].
/proc/pci: Non-prefetchable 32 bit memory at 0x88851000 [0x8885100f].
/proc/pci: Non-prefetchable 32 bit memory at 0x88000000 [0x887fffff].
/proc/pci: Bus 4, device 4, function 0:
/proc/pci: Class 0300: PCI device 1002:515e (rev 2).
/proc/pci: IRQ 11.
/proc/pci: Master Capable. Latency=64. Min Gnt=8.
/proc/pci: Prefetchable 32 bit memory at 0x80000000 [0x87ffffff].
/proc/pci: I/O at 0x1000 [0x10ff].
/proc/pci: Non-prefetchable 32 bit memory at 0x88840000 [0x8884ffff].
/proc/pci: Bus 4, device 5, function 0:
/proc/pci: Class 0200: PCI device 8086:1076 (rev 5).
/proc/pci: IRQ 16.
/proc/pci: Master Capable. Latency=64. Min Gnt=255.
/proc/pci: Non-prefetchable 32 bit memory at 0x88820000 [0x8883ffff].
/proc/pci: Non-prefetchable 32 bit memory at 0x88800000 [0x8881ffff].
/proc/pci: I/O at 0x1200 [0x123f].
/proc/bus/pci/devices: 0000 80862778 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
/proc/bus/pci/devices: 00e0 808627d0 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver
/proc/bus/pci/devices: 00e4 808627e0 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver
/proc/bus/pci/devices: 00e5 808627e2 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver
/proc/bus/pci/devices: 00e8 808627c8 13 0 0 0 0 3081 0 0 0 0 0 0 20 0 0 uhci_hcd
/proc/bus/pci/devices: 00e9 808627c9 14 0 0 0 0 3061 0 0 0 0 0 0 20 0 0 uhci_hcd
/proc/bus/pci/devices: 00ea 808627ca 12 0 0 0 0 3041 0 0 0 0 0 0 20 0 0 uhci_hcd
/proc/bus/pci/devices: 00eb 808627cb 11 0 0 0 0 3021 0 0 0 0 0 0 20 0 0 uhci_hcd
/proc/bus/pci/devices: 00ef 808627cc 13 88a00400 0 0 0 0 0 0 400 0 0 0 0 0 0 ehci_hcd
/proc/bus/pci/devices: 00f0 8086244e 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
/proc/bus/pci/devices: 00f8 808627b8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
/proc/bus/pci/devices: 00f9 808627df 12 0 0 0 0 30b1 0 0 0 0 0 0 10 0 0 PIIX_IDE
/proc/bus/pci/devices: 00fa 808627c1 14 30c9 30e5 30c1 30e1 30a1 88a00000 0 8 4 8 4 10 400 0 ahci
/proc/bus/pci/devices: 00fb 808627da b 0 0 0 0 3001 0 0 0 0 0 0 20 0 0 i801_smbus
/proc/bus/pci/devices: 0300 8086108b 10 88900000 0 2001 0 0 0 0 20000 0 20 0 0 0 0 e1000
/proc/bus/pci/devices: 0400 90050080 15 1101 88850004 0 0 0 0 fffe0000 100 1000 0 0 0 0 20000 aic7xxx
/proc/bus/pci/devices: 0408 13c11001 16 1241 88851000 88000000 0 0 0 888a0000 10 10 800000 0 0 0 10000 3w-xxxx
/proc/bus/pci/devices: 0420 1002515e b 80000008 1001 88840000 0 0 0 88860002 8000000 100 10000 0 0 0 20000
/proc/bus/pci/devices: 0428 80861076 10 88820000 88800000 1201 0 0 0 88880000 20000 20000 40 0 0 0 20000 e1000
lsmod: Module Size Used by
lsmod: ipv6 279168 12
lsmod: button 11936 0
lsmod: ac 9864 0
lsmod: battery 14856 0
lsmod: i8xx_tco 12456 0
lsmod: dm_mod 59592 0
lsmod: i2c_i801 13844 0
lsmod: i2c_core 27264 1 i2c_i801
lsmod: psmouse 40196 0
lsmod: pcspkr 6664 0
lsmod: serio_raw 12164 0
lsmod: joydev 15232 0
lsmod: evdev 16128 0
lsmod: ext3 135056 2
lsmod: jbd 63016 1 ext3
lsmod: mbcache 15240 1 ext3
lsmod: raid1 24704 4
lsmod: md_mod 72696 4 raid1
lsmod: ide_generic 5760 0 [permanent]
lsmod: sd_mod 22784 10
lsmod: ide_cd 44576 0
lsmod: cdrom 40504 1 ide_cd
lsmod: 3w_xxxx 31392 0
lsmod: ahci 17796 8
lsmod: uhci_hcd 36256 0
lsmod: libata 61336 1 ahci
lsmod: ehci_hcd 36360 0
lsmod: aic7xxx 160980 0
lsmod: scsi_transport_spi 27392 1 aic7xxx
lsmod: scsi_mod 150904 6 sd_mod,3w_xxxx,ahci,libata,aic7xxx,scsi_transport_spi
lsmod: e1000 106292 0
lsmod: piix 15364 0 [permanent]
lsmod: generic 9732 0 [permanent]
lsmod: ide_core 147064 4 ide_generic,ide_cd,piix,generic
lsmod: thermal 19596 0
lsmod: processor 30088 1 thermal
lsmod: fan 9480 0
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: /dev/md0 7692840 453928 6848136 7% /
df: tmpfs 1027460 0 1027460 0% /dev/shm
df: /dev/md2 469090352 131260 445130688 1% /mnt/vault
df: tmpfs 1027460 100 1027360 1% /dev
free: total used free shared buffers cached
free: Mem: 2054920 140108 1914812 0 6448 80652
free: -/+ buffers/cache: 53008 2001912
free: Swap: 4000056 0 4000056
cardctl status: /usr/bin/report-hw: line 32: cardctl: command not found
cardctl ident: /usr/bin/report-hw: line 33: cardctl: command not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 6
/proc/cpuinfo: model name : Intel(R) Pentium(R) D CPU 3.00GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2992.644
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 6
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 5991.49
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 128
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 6
/proc/cpuinfo: model name : Intel(R) Pentium(R) D CPU 3.00GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2992.644
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 1
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 6
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 5984.22
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 128
/proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0077 : rtc
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0400-0403 : PM1a_EVT_BLK
/proc/ioports: 0404-0405 : PM1a_CNT_BLK
/proc/ioports: 0408-040b : PM_TMR
/proc/ioports: 0410-0415 : ACPI CPU throttle
/proc/ioports: 0420-0420 : PM2_CNT_BLK
/proc/ioports: 0428-042f : GPE0_BLK
/proc/ioports: 0460-046f : i8xx TCO
/proc/ioports: 0500-053f : pnp 00:05
/proc/ioports: 0680-06ff : pnp 00:05
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-1fff : PCI Bus #04
/proc/ioports: 1000-10ff : 0000:04:04.0
/proc/ioports: 1100-11ff : 0000:04:00.0
/proc/ioports: 1200-123f : 0000:04:05.0
/proc/ioports: 1200-123f : e1000
/proc/ioports: 1240-124f : 0000:04:01.0
/proc/ioports: 1240-124f : 3w-xxxx
/proc/ioports: 2000-2fff : PCI Bus #03
/proc/ioports: 2000-201f : 0000:03:00.0
/proc/ioports: 2000-201f : e1000
/proc/ioports: 3000-301f : 0000:00:1f.3
/proc/ioports: 3000-3007 : i801_smbus
/proc/ioports: 3020-303f : 0000:00:1d.3
/proc/ioports: 3020-303f : uhci_hcd
/proc/ioports: 3040-305f : 0000:00:1d.2
/proc/ioports: 3040-305f : uhci_hcd
/proc/ioports: 3060-307f : 0000:00:1d.1
/proc/ioports: 3060-307f : uhci_hcd
/proc/ioports: 3080-309f : 0000:00:1d.0
/proc/ioports: 3080-309f : uhci_hcd
/proc/ioports: 30a0-30af : 0000:00:1f.2
/proc/ioports: 30a0-30af : ahci
/proc/ioports: 30b0-30bf : 0000:00:1f.1
/proc/ioports: 30b0-30b7 : ide0
/proc/ioports: 30c0-30c7 : 0000:00:1f.2
/proc/ioports: 30c0-30c7 : ahci
/proc/ioports: 30c8-30cf : 0000:00:1f.2
/proc/ioports: 30c8-30cf : ahci
/proc/ioports: 30e0-30e3 : 0000:00:1f.2
/proc/ioports: 30e0-30e3 : ahci
/proc/ioports: 30e4-30e7 : 0000:00:1f.2
/proc/ioports: 30e4-30e7 : ahci
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cafff : Video ROM
/proc/iomem: 000cb000-000cb7ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7fe70fff : System RAM
/proc/iomem: 00100000-002be4c7 : Kernel code
/proc/iomem: 002be4c8-0038458f : Kernel data
/proc/iomem: 7fe71000-7fee8fff : ACPI Non-volatile Storage
/proc/iomem: 7fee9000-7feecfff : System RAM
/proc/iomem: 7feed000-7fefefff : ACPI Tables
/proc/iomem: 7feff000-7fefffff : System RAM
/proc/iomem: 80000000-87ffffff : PCI Bus #04
/proc/iomem: 80000000-87ffffff : 0000:04:04.0
/proc/iomem: 88000000-888fffff : PCI Bus #04
/proc/iomem: 88000000-887fffff : 0000:04:01.0
/proc/iomem: 88000000-887fffff : 3w-xxxx
/proc/iomem: 88800000-8881ffff : 0000:04:05.0
/proc/iomem: 88800000-8881ffff : e1000
/proc/iomem: 88820000-8883ffff : 0000:04:05.0
/proc/iomem: 88820000-8883ffff : e1000
/proc/iomem: 88840000-8884ffff : 0000:04:04.0
/proc/iomem: 88850000-88850fff : 0000:04:00.0
/proc/iomem: 88850000-88850fff : aic7xxx
/proc/iomem: 88851000-8885100f : 0000:04:01.0
/proc/iomem: 88851000-8885100f : 3w-xxxx
/proc/iomem: 88860000-8887ffff : 0000:04:04.0
/proc/iomem: 88880000-8889ffff : 0000:04:05.0
/proc/iomem: 888a0000-888affff : 0000:04:01.0
/proc/iomem: 88900000-889fffff : PCI Bus #03
/proc/iomem: 88900000-8891ffff : 0000:03:00.0
/proc/iomem: 88900000-8891ffff : e1000
/proc/iomem: 88a00000-88a003ff : 0000:00:1f.2
/proc/iomem: 88a00000-88a003ff : ahci
/proc/iomem: 88a00400-88a007ff : 0000:00:1d.7
/proc/iomem: 88a00400-88a007ff : ehci_hcd
/proc/iomem: fffe0000-ffffffff : 0000:04:00.0
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 0: 1043672 0 IO-APIC-edge timer
/proc/interrupts: 1: 498 0 IO-APIC-edge i8042
/proc/interrupts: 8: 0 0 IO-APIC-edge rtc
/proc/interrupts: 9: 0 0 IO-APIC-level acpi
/proc/interrupts: 14: 64 0 IO-APIC-edge ide0
/proc/interrupts: 16: 24257 0 IO-APIC-level eth0
/proc/interrupts: 17: 0 0 IO-APIC-level uhci_hcd:usb5
/proc/interrupts: 18: 0 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 19: 0 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2
/proc/interrupts: 20: 7955 0 IO-APIC-level uhci_hcd:usb3, libata
/proc/interrupts: 21: 15 0 IO-APIC-level aic7xxx
/proc/interrupts: 22: 17 0 IO-APIC-level 3w-xxxx
/proc/interrupts: NMI: 161 96
/proc/interrupts: LOC: 1043387 1043321
/proc/interrupts: ERR: 1
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 2054920 kB
/proc/meminfo: MemFree: 1915316 kB
/proc/meminfo: Buffers: 6448 kB
/proc/meminfo: Cached: 80652 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 80992 kB
/proc/meminfo: Inactive: 21496 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 2054920 kB
/proc/meminfo: LowFree: 1915316 kB
/proc/meminfo: SwapTotal: 4000056 kB
/proc/meminfo: SwapFree: 4000056 kB
/proc/meminfo: Dirty: 84 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 20156 kB
/proc/meminfo: Slab: 23404 kB
/proc/meminfo: CommitLimit: 5027516 kB
/proc/meminfo: Committed_AS: 26616 kB
/proc/meminfo: PageTables: 888 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 264500 kB
/proc/meminfo: VmallocChunk: 34359473363 kB
/proc/bus/usb/devices:
/proc/bus/usb/devices: T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
/proc/bus/usb/devices: B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
/proc/bus/usb/devices: D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
/proc/bus/usb/devices: P: Vendor=0000 ProdID=0000 Rev= 2.06
/proc/bus/usb/devices: S: Manufacturer=Linux 2.6.15-1-em64t-p4-smp uhci_hcd
/proc/bus/usb/devices: S: Product=UHCI Host Controller
/proc/bus/usb/devices: S: SerialNumber=0000:00:1d.3
/proc/bus/usb/devices: C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
/proc/bus/usb/devices: I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
/proc/bus/usb/devices: E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
/proc/bus/usb/devices:
/proc/bus/usb/devices: T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
/proc/bus/usb/devices: B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
/proc/bus/usb/devices: D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
/proc/bus/usb/devices: P: Vendor=0000 ProdID=0000 Rev= 2.06
/proc/bus/usb/devices: S: Manufacturer=Linux 2.6.15-1-em64t-p4-smp uhci_hcd
/proc/bus/usb/devices: S: Product=UHCI Host Controller
/proc/bus/usb/devices: S: SerialNumber=0000:00:1d.2
/proc/bus/usb/devices: C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
/proc/bus/usb/devices: I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
/proc/bus/usb/devices: E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
/proc/bus/usb/devices:
/proc/bus/usb/devices: T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
/proc/bus/usb/devices: B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
/proc/bus/usb/devices: D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
/proc/bus/usb/devices: P: Vendor=0000 ProdID=0000 Rev= 2.06
/proc/bus/usb/devices: S: Manufacturer=Linux 2.6.15-1-em64t-p4-smp uhci_hcd
/proc/bus/usb/devices: S: Product=UHCI Host Controller
/proc/bus/usb/devices: S: SerialNumber=0000:00:1d.1
/proc/bus/usb/devices: C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
/proc/bus/usb/devices: I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
/proc/bus/usb/devices: E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
/proc/bus/usb/devices:
/proc/bus/usb/devices: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
/proc/bus/usb/devices: B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
/proc/bus/usb/devices: D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
/proc/bus/usb/devices: P: Vendor=0000 ProdID=0000 Rev= 2.06
/proc/bus/usb/devices: S: Manufacturer=Linux 2.6.15-1-em64t-p4-smp uhci_hcd
/proc/bus/usb/devices: S: Product=UHCI Host Controller
/proc/bus/usb/devices: S: SerialNumber=0000:00:1d.0
/proc/bus/usb/devices: C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
/proc/bus/usb/devices: I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
/proc/bus/usb/devices: E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
/proc/bus/usb/devices:
/proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
/proc/bus/usb/devices: B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
/proc/bus/usb/devices: D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
/proc/bus/usb/devices: P: Vendor=0000 ProdID=0000 Rev= 2.06
/proc/bus/usb/devices: S: Manufacturer=Linux 2.6.15-1-em64t-p4-smp ehci_hcd
/proc/bus/usb/devices: S: Product=EHCI Host Controller
/proc/bus/usb/devices: S: SerialNumber=0000:00:1d.7
/proc/bus/usb/devices: C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
/proc/bus/usb/devices: I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
/proc/bus/usb/devices: E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3802078f840d001 f2ffffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0010 Vendor=001f Product=0001 Version=0100
/proc/bus/input/devices: N: Name="PC Speaker"
/proc/bus/input/devices: P: Phys=isa0061/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=kbd event1
/proc/bus/input/devices: B: EV=40001
/proc/bus/input/devices: B: SND=6
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: line 41: dmidecode: command not found
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-em64t-p4-smp
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.21.2 reports bugs in the Debian distrib
-- no debconf information
Reply to: