Re: INSTALL REPORT
Am Mon, den 01.12.2003 schrieb Robert Staudinger um 14:27:
> INSTALL REPORT
>
> Debian-installer-version: 2003-11-29
> http://www.soziologie.ch/~steinlin/d-i/powerpc/sarge-powerpc-netinst.iso
> uname -a: Linux localhost.localdomain 2.4.20-8d_owen_aty128 #1 Wed Jul 16 13:04:19 CEST 2003 ppc ppc ppc GNU/Linux
> Date: 2003-12-01 12:00
> Method: Install from CD Boot off CD
>
> Machine: late 2001 iBook2
> Processor: G3 600MHz
> Memory: 384MB
> Root Device: IBM 40GB ide (not 100% sure)
>
> =====
> Partition map (with 512 byte blocks) on '/dev/hda'
> #: type name length base ( size )
> 1: Apple_partition_map Apple 63 @ 1
> 2: Apple_Bootstrap*untitled 2048 @ 64 ( 1.0M)
> 3: Apple_UNIX_SVR2 untitled 10240000 @ 2112 ( 4.9G)
> 4: Apple_UNIX_SVR2 swap 1228800 @ 10242112 (600.0M)
> 5: Apple_UNIX_SVR2 untitled 66669248 @ 11470912 ( 31.8G)
>
> Device block size=512, Number of Blocks=78140160 (37.3G)
> DeviceType=0x0, DeviceId=0x0
> Drivers-
> 1: 23 @ 64, type=0x1
> 2: 36 @ 118, type=0xffff
> 3: 21 @ 192, type=0x701
> 4: 34 @ 246, type=0xf8ff
> =====
> Want to mount 4: as swap and 5: as /
>
> Output of lspci:
> 00:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea AGP
> 00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x
> (rev 02)
> 10:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea PCI
> 10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Pangea Mac I/O
> 10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB
> 10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB
> 20:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea Internal PCI
> 20:0e.0 Class ffff: Apple Computer Inc. UniNorth/Pangea FireWire (rev ff)
> 20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM)
>
> Base System Installation Checklist:
>
> Initial boot worked: [O]
> Configure network HW: [O]
> Config network: [O]
> Detect CD: [O]
> Load installer modules: [O]
> Detect hard drives: [O]
> Partition hard drives: [O]
> Create file systems: [O]
> Mount partitions: [O]
> Install base system: [E]
> Install boot loader: [ ]
> Reboot: [ ]
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>
> Comments/Problems:
>
> After selecting the kernel the progress-bar started but the kernel couldn't be
> installed and the kernel-selection came again. No way to install kernel and
> continue.
This image has a know and fixed bug, that kernel-installer tries to
install initrd-tools, which is not on the cd and is not needed by the
current powerpc kernels. Unfortunately nobody seems to have a more
recent powerpc image around and gluck is still down.
You could try the cdrom-udeb-all-none.img. this one should not have this
bug.
Gaudenz
Reply to: