INSTALL REPORT
INSTALL REPORT
Debian-installer-version: 2003-11-29
http://www.soziologie.ch/~steinlin/d-i/powerpc/sarge-powerpc-netinst.iso
uname -a: Linux localhost.localdomain 2.4.20-8d_owen_aty128 #1 Wed Jul 16 13:04:19 CEST 2003 ppc ppc ppc GNU/Linux
Date: 2003-12-01 12:00
Method: Install from CD Boot off CD
Machine: late 2001 iBook2
Processor: G3 600MHz
Memory: 384MB
Root Device: IBM 40GB ide (not 100% sure)
=====
Partition map (with 512 byte blocks) on '/dev/hda'
#: type name length base ( size )
1: Apple_partition_map Apple 63 @ 1
2: Apple_Bootstrap*untitled 2048 @ 64 ( 1.0M)
3: Apple_UNIX_SVR2 untitled 10240000 @ 2112 ( 4.9G)
4: Apple_UNIX_SVR2 swap 1228800 @ 10242112 (600.0M)
5: Apple_UNIX_SVR2 untitled 66669248 @ 11470912 ( 31.8G)
Device block size=512, Number of Blocks=78140160 (37.3G)
DeviceType=0x0, DeviceId=0x0
Drivers-
1: 23 @ 64, type=0x1
2: 36 @ 118, type=0xffff
3: 21 @ 192, type=0x701
4: 34 @ 246, type=0xf8ff
=====
Want to mount 4: as swap and 5: as /
Output of lspci:
00:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea AGP
00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x
(rev 02)
10:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea PCI
10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Pangea Mac I/O
10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB
10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB
20:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea Internal PCI
20:0e.0 Class ffff: Apple Computer Inc. UniNorth/Pangea FireWire (rev ff)
20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
After selecting the kernel the progress-bar started but the kernel couldn't be
installed and the kernel-selection came again. No way to install kernel and
continue.
Thanks,
Robert
Reply to: